8/14 Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
U
SE OF CONTROLS
Dipped lights/Headlights
switch.
The dipped lights/headlights
switch has 2 functions:
A. High beam.
B. Dip beam.
Indicators switch.
To indicate a change of direction, press the switch (C):
• Either to the right.
• Or to the left.
To stop the indicators flashing, press the switch. (C)
Emergency stop button.
This feature is used to stop
the engine in case of
emergency.
D. Engine off position.
E. Start-up position.
This button must not be used
to switch off the engine on a
regular basis.
Hazard warning light switch.
F. The hazard warning lights only work with the ignition
key in the "ON" position.
The hazard warning lights are switched off automatically
1 hour after the ignition was switched off, to perserve the
battery.
C
HECKS TO PERFORM BEFORE USE
The user must personally ensure that his vehicle is in
good condition. Certain safety elements may show signs
of damage even when the vehicle is not used. e.g.
prologned exposure to bad weather can lead to oxidation
in the braking system or a pressure drop in the tyres
which can have serious consequences. In addition to a
simple visual inspection, it is extremely important to
check the following points before use.
These checks only take a few minutes and
help to keep your vehicle in good condition,
for optimum use combining reliability and
safety.
If one if the elements in the checklist does not work
properly, ask your registered dealer to check it and have
it repaired if necessary before using the vehicle.
I
NSPECTION BEFORE SETTING OFF
• Check the fuel level.
• Check the level of the engine oil.
• Check that the brake levers are working and moving
properly.
• Check operation of the lights, flashers, horn, and brake
light.
• Check the tyre wear and condition.
• Check the tyre pressure.
• Check that the throttle is working properly.
• Check that the central and side stands can be unfolded
smoothly.
• Check that the rear-view mirrors are in the correct
position.
• Check that the dashboard is working correctly and that
no warning lights are lit. If they don't work, have the
system checked by a registered dealer.
If a brake lever feels soft when you actuate it,
you must have it immediately checked by an
authorised dealer.
A
DVICE FOR STARTING UP AND
DRIVING
W
ARNING
Before using the vehicle for the first time, make sure you
are familiar with all the controls and their respective
uses. If you are not sure about the functions of any
of the
controls, your registered dealer can answer your
questions and give you any help you may require.
As exhaust fumes are toxic, the engine must be started in
a well-ventilated area. It must never be allowed to run in
a closed space, even for a short time.
S
TARTING THE ENGINE
For greater safety, place the vehicle on its central stand
before starting the engine.
The lateral stand has a contactor which prevents start-up
if the stand is down.
• Turn the ignition key to "ON".
• Ensure that the throttle is in the OFF position.
• Press one of the brake levers while pressing the starter
button. Do not press the starter for more than
10 seconds.
• Release the starter button as soon as the engine starts.
If the engine does not start, release the
starter button and the brake lever, wait a few
seconds and try again.
A
B
C
D
E
F
NOTICE-GEOPOLIS-04D.mif Page 8 Lundi, 1. mars 2010 2:47 14
