750008
37
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
A B
C D
E
F
G
MACHINE MAINTENANCE37
MACHINE MAINTENANCE
Cleaning the Upper Cutter Area
Turn off the main power switch and unplug the machine.
Cleaning the Feed Teeth
Open the front cover.
With a forward brushing movement, use the lint brush to
remove any lint.
Note: You may use a vacuum cleaner to clean the upper knife
area or feed teeth.
Turn off the main power switch and unplug the machine.
Deactivate the stitch nger by setting it in “R” position (A).
Open the side and front covers.
Remove the needle(s) and the presser foot.
Remove the set screw (B) with the large screw driver. Re-
move the needle plate.
Use the lint brush to remove any lint from around the
feed teeth (C).
Place the stitch plate over the feed teeth, making sure the
tab of the stitch plate (D) is inserted under the edge of the
cover (E). The hole in the stitch plate (F) should align with
the knob on the machine (G).
Replace and tighten the set screw.
Attach the needle(s) and the presser foot.
Close the side and front covers.
An overlock requires more frequent maintenance than a conventional sewing machine for two reasons:
A lot of lint is produced when the cutters are cutting the fabric.
An overlock runs at a very high speed and needs to be oiled frequently to lubricate the internal working parts.
Storage
When the machine is not in use, be sure to keep it unplugged. Store the machine, so it is not exposed to direct sunlight
or humidity.
Servicing
If you have any questions regarding service and/or operation, contact our Customer Care department.
37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pfaff Admire Air 5000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pfaff Admire Air 5000

Pfaff Admire Air 5000 Bedienungsanleitung - Deutsch - 44 seiten

Pfaff Admire Air 5000 Bedienungsanleitung - Holländisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info