Bedienungsanleitung Pfaff Admire Air 5000 (Seite 41 von 44) (Englisch)

750008

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

MACHINE MAINTENANCE – 41

Fabric Puckers

Possible Cause: Thread tensions are set too tightly.

Solution: Loosen thread tensions (page 27).

Possible Cause: Thread is not unreeling smoothly off the thread spool.

Solution: Check the thread spool to ensure thread is not getting caught.

Possible Cause: Using thread that is poor quality or has uneven lament.

Solution: Use good quality thread with a smooth, even lament.

Possible Cause: Stitch length is set too short.

Solution: Adjust stitch length to a longer setting (page 26).

Possible Cause: Differential Feed is not set in the correct position for the fabric being sewn.

Solution: Adjust the Differential Feed (page 25).

Needle Breaks

Possible Cause: Needle may not be properly seated in the needle clamp.

Solution: Insert needle so that it is all the way up in the needle clamp, then tighten the screw securely (page 10).

Possible Cause: Manually pulling fabric from behind presser foot while sewing which causes needles to de-

ect.

Solution: Refrain from pulling fabric manually; allow feed teeth to draw fabric under presser foot.

Possible Cause: Needle may not be the correct size for the fabric being sewn.

Solution: Use a needle size that is compatible for the fabric (page 12).

Thread Breaks

Possible Cause: Machine may not be threaded correctly.

Solution: Check that machine is threaded in correctly as shown in machine manual (page 14-23).

Possible Cause: Thread is not unreeling smoothly off the thread spool.

Solution:Check the thread spool to ensure thread is not getting caught.

Possible Cause: Needle(s) may have a bent, dull or broken point.

Solution:Replace needle(s) (page 10).

Possible Cause: The needle is inserted incorrectly

Solution:Insert the needle correctly (page 10).

Possible Cause: Using thread that is poor quality or has uneven lament.

Solution:Use good quality thread with a smooth, even lament.

Possible Cause: Thread tension is set too tight.

Solution:Loosen thread tension (page 27).

Possible Cause: Thread is caught in one of the thread guides.

Solution:Check threading path to ensure all threads are feeding smoothly.

Stitches Skipping

Possible Cause: Needle(s) may have a bent, dull or broken point.

Solution: Replace needle(s) (page 10).

Possible Cause: Needle may not be properly seated in the needle clamp.

Solution: Insert needle so that it is all the way up in the needle clamp, then tighten the screw securely (page 10).

Possible Cause: Needle may not be the correct size for the fabric being sewn.

Solution: Use a needle size that is compatible for the fabric (page 12).

Possible Cause: Machine may not be threaded correctly.

Solution: Check that machine is threaded in correctly as shown in machine manual (page 14-23).

Possible Cause: Using thread that is poor quality or has uneven lament.

Solution: Use good quality thread with a smooth, even lament.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pfaff Admire Air 5000 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pfaff Admire Air 5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info