631187
54
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
Embroidering
Getting Started Embroidering
1. Clear sufficient space to accommodate movement of
the embroidery arm and the hoop.
2. Make sure the machine is turned off and slide the
embroidery unit onto the free arm of the machine
until it plugs firmly into the socket. Turn on the
machine. It will automatically restart and enter
embroidery mode. A pop-up tells you to remove the
hoop for positioning. Press OK. The machine will
calibrate and the embroidery arm will move to the
ready position.
3. Make sure the IDT™ system is disengaged and
attach the embroidery foot. Insert a bobbin with
lightweight bobbin thread.
4. Select a design number from the machine by using
the keypad or select one from a USB embroidery
stick (make sure that the USB embroidery stick is
connected) and press OK to load to embroidery
stitch-out.
5. The design is placed in the center of the hoop.
6. Hoop a piece of fabric and stabilizer, and slide the
hoop onto the embroidery arm.
7. Thread the machine with the first color in the color
list.
8. Lower the presser foot. Hold the needle thread and
press the start/stop button or the foot control. The
machine starts embroidering and stops
automatically after few stitches. A pop-up appears
asking you to cut thread end. Cut thread end and
press OK. Continue embroidering by pressing start/
stop or the foot control.
Note: Automatic stop for cut is activated by default. Open the
settings menu to deactivate this setting. Automatic stop for
cut is disabled if you use the foot control when embroidering.
9. When the first color is completed, your machine
stops. A pop-up appears asking you to change color.
Re-thread with the next color and press OK.
Continue embroidering by pressing start/stop or the
foot control. Each color segment is tied off at the end
and the needle and bobbin threads are cut.
10. When the embroidery is completed, your machine
cuts both threads and stops. A pop-up informs you
that your embroidery is finished. Press OK. Raise the
presser foot to easily remove the hoop.
54
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pfaff Creative 1.5 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pfaff Creative 1.5

Pfaff Creative 1.5 Bedienungsanleitung - Deutsch - 72 seiten

Pfaff Creative 1.5 Bedienungsanleitung - Holländisch - 84 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info