Bedienungsanleitung Pfaff Creative Performance (Seite 139 von 148) (Englisch)

478171

139

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

11:3

Maintenance

Problem/cause Remedy

General problems

Bobbin alarm does not work? Clean lint from bobbin area and use only the original

PFAFF® bobbins approved for this model.

Thread snips does not cut the thread? Remove needle plate and clean lint from bobbin area.

Enable automatic thread snips in the Settings menu.

Fabric does not move? Make sure that machine is not set in free-motion mode.

See chapter 4.

Wrong stitch, irregular or narrow stitch? Deactivate twin needle or stitch width safety in the

Settings menu.

The needle breaks? Insert needle correctly as described in chapter 2.

The machine will not sew? Check that all plugs are securely plugged into the

machine and into the wall socket.

Push bobbin winder lever to sewing position.

The PFAFF® DSFBUJWF Color Touch Screen

displays the startup screen?

Touch the screen to activate.

Turn off screen saver in the Settings menu.

Icons on the screen are not activated when

touched?

Close any pop-ups that may be blocking the screen.

Calibrate the screen. Calibrate is found in the Settings

menu.

The sewing and embroidery machine screen and/

or Function Buttons do not respond to touch?

The sockets and function buttons on the machine can

be sensitive to static electricity. If the screen does not

respond to touch, turn the machine OFF and then ON

again. If the problem persists, contact your authorized

PFAFF® dealer.

The machine skips stitches

Did you insert the needle properly? Insert needle correctly as described in chapter 2.

Did you insert a wrong needle? Use needle system 130/705 H.

Is the needle bent or blunt? Insert a new needle.

Did you thread the machine properly? Check how the machine is threaded.

Is the correct presser foot used? Attach correct presser foot.

Is the needle too small for the thread? Change the needle.

Is the fabric moving up and down with the needle

when free-motion sewing or embroidering?

Attach Dynamic spring foot 6D (optional accessory, part

number 820991-096).

If using foot 6A, reduce the presser foot height.

Needle thread breaks

Did you insert the needle properly? Insert needle correctly as described in chapter 2.

Did you insert a wrong needle? Use needle system 130/705 H.

Is the needle bent or blunt? Insert a new needle.

Did you thread the machine properly? Check how the machine is threaded.

Is the needle too small for the thread? Change the needle to the proper size for the thread.

Are you using poor thread with slubs or thread

which has become dry?

Change to a new higher quality thread purchased from

an authorized PFAFF® dealer.

Troubleshooting

In this troubleshooting guide you will À nd solutions to the problems you may have with your machine.

For further information please contact your local authorized PFAFF® dealer who will be happy to help

you.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pfaff Creative Performance Seite 139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pfaff Creative Performance

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info