Bedienungsanleitung Phicomm CLUE - C230 (Seite 35 von 53) (Englisch)

694119

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

WLAN

You device can conncect via WLAN, GPRS/3G or EDGE to the

internet.

With WLAN, you can access the internet wirelessy over a distance

up to 100 meters from the router. To access the internet via a

wireless connection, you need to look for an available wireless

network and connect to this network. The strength of the signal

depends on several factors and may therefore vary.

TURN ON WIRELESS FUNCTION AND CONNCECT TO WIRELESS

NETWORK

Tap on the home screen on the menu key.

Tap on System settings > Wireless & Networks.

Activate WLAN by sliding the bar from OFF to ON to scan for

available networks in the area.

Select a network to which you want to connect. If you select

an unsecured network, you are automatically connected. If

you select a secured network, you have to enter the network

key. Once the connection is established, the WLAN icon

appears in the status bar .

Alternatively, you can also work with the status bar directly:

Wipe the status bar down and tap on .

Tap on WLAN.

Follow the step 5. and 6.

NOTICE:



Next time you use your device to detect Wi-Fi networks, you

will not be prompted to enter the network key of the

previously accessed Wi-Fi network (unless you perform a hard

reset which will erase custom settings on your device).



WLAN networks are self-discoverable, which means no

additional steps are required for your device to connect to a

WLAN network. It may be necessary to provide a username

and password for certain closed wireless networks.

SEARCH FOR WLAN NETWORK MANUALLY

Tap on the homescreen on the menu key.

Tap on System settings > Wireless & Networks.

Activate WLAN by sliding the bar from OFF to ON and then

tap on WLAN.

Tap the menu key and tap on Scan. The phone is now

searching for available WLAN networks and displays them in a

list.

Tap on the WLAN network you want to connect to and follow

the instructions.

WLAN-NETZWERK MANUELL HINZUFÜGEN

Tap on the homescreen on the menu key.

Tap on System settings > Wireless & Networks.

Activate WLAN by sliding the bar from OFF to On.

Tap on WLAN and then on Add network .

Enter the network SSID.

Tap on Security, to select a securty type

Enter the password if prompted.

Confirm with Save.

NOTICE: Contact your wireless network provider to obtain

information about the exact settings for the SSID network.

WLAN NETWORK STATUS

If you are connected to a WLAN network or when a WLAN

network is available within your each, you can view the status. You

can set up your phone to get a notification when an open WLAN

network is detected.

Status bar: Once you are connected to a WLAN network, the

WLAN icon appears and informs you about the signal strength .

If the WLAN notification is enabled, you will be automatically

informed by this symbol when an open network has been

detected.

ENABLE WLAN NETWORK NOTIFICATION

Turn on WLAN, if ist not already turned on.

Tap on the homescreen on the menu key.

Tap on System settings > Wireless & Networks > WLAN.

Tap on the menu key > Advanced.

Tap on the check box Network notification.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Phicomm CLUE - C230 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Phicomm CLUE - C230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info