Bedienungsanleitung Philco CDV210HH8 (Seite 4 von 26) (Englisch)

501682

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

–

Precautions

Location and Handling

•

Do not stand this unit up vertically. Install this unit in a

horizontal and stable position. Do not place anything directly on

top of this unit. Do not place this unit directly on top of the TV.

• Depending on the TV, noise or disturbance of the picture and/or

sound may be generated if this unit is placed too close to your

TV. In this case, please ensure enough space between your TV

and this unit.

• Do not cover or place this unit in enclosed spaces to prevent

excessive temperature build up.

•

Do not place this unit in direct sunlight, or near heat sources.

• Depending on the environment, the temperature of this unit

may increase slightly. This is not a malfunction.

• Keep this unit away from strong magnetic objects.

• Do not place any object containing water or other liquids on

this unit. In the event that liquid should enter the cabinet,

unplug this unit immediately and contact the retailer or an

authorized service center immediately.

• Do not remove this unit cabinet. Touching parts inside the

cabinet could result in electric shock and/or damage to this unit.

For service and adjustment inside the cabinet, call a qualified

dealer or an authorized service center.

• Be sure to remove disc and cassette tape and unplug the AC

power cord from the output before carrying this unit.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC

outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug the power

cord immediately and take the unit to our authorized service

center for servicing.

•

Do not put your fingers or objects into the unit cassette holder.

Moisture Condensation Warning

Moisture may form inside this unit under the following conditions:

• Immediately after a heater is turned on.

• In a steamy or humid room.

• When this unit is suddenly moved from a cold to warm

environment.

If moisture forms inside this unit, it may not operate properly or

damage the cassette tape. In such case, do not use this unit at

least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance and

lending of discs are prohibited.

This product incorporates copyright protection technology that

is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

Symbols Used in This Manual

The following symbols appear in some headings in this manual.

: Description refers to video cassette tapes.

Description refers to DVD-Video.

: Description refers to Audio CD.

: Description refers to MP3 files.

Hint

• Remember to read the instructions along with the video head cleaner

before use.

• Clean video heads only when problems occur.

Maintenance

Servicing

• Please refer to relevant topics on the “Troubleshooting Guide”

on page 20 before returning the product.

• If this unit becomes inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts inside.

Turn off, unplug the power plug, and please call our toll free

customer support line found on the cover of this manual to

locate an authorized service center.

Cleaning the Cabinet

• Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution containing alcohol, spirits,

ammonia or abrasive.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth. Wipe

the disc from the center to out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially

available cleaners, detergent, abrasive cleaning agents or

antistatic spray intended for analog records.

Cleaning the Disc Lens

• If this unit continues to perform improperly even after you have

referred to the relevant sections and to the “Troubleshooting

Guide” in this manual, the laser optical pickup unit may be dirty.

Consult your dealer or an authorized service center for inspection

and cleaning of the laser optical pickup unit.

Disc Handling

• When you handle a disc, hold it by its edge and try not to touch

the surface of the disc.

• Always store the disc in its protective case when not in use.

Auto Head Cleaning

• Automatically cleans video heads as you insert or remove a

cassette tape, so you can see a clear picture.

• Playback picture may become blurred or interrupted while the

TV program reception is clear. Dirt accumulated on the video

heads after a long period of use, or the usage of rental or worn

cassette tapes can cause this problem. If a streaky or snowy

picture appears during playback, the video heads in your unit

may need to be cleaned.

1. Please visit your local audio/video store and purchase a good

quality VHS video head cleaner.

If a Video head cleaner does not solve the problem, please call

our toll free customer support line found on the cover of this

manual to locate an authorized service center.

Manufactured under license from

Dolby Laboratories. “Dolby” and the

double-D symbol are trademarks of Dolby

Laboratories.

copied, transmitted, disseminated, transcribed, downloaded or

stored in any storage medium, in any form or for any purpose

without the express prior written consent of Funai. Furthermore,

any unauthorized commercial distribution of this manual or any

revision hereto is strictly prohibited.

Information in this document is subject to change without notice.

Funai reserves the right to change the content herein without the

obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai

Electric Co., Ltd and may not be used in any way without the

express written consent of Funai. All other trademarks used

herein remain the exclusive property of their respective owners.

Nothing contained in this manual should be construed as

granting, by implication or otherwise, any license or right to use

any of the trademarks displayed herein. Misuse of any

trademarks or any other content in this manual is strictly

prohibited. Funai shall aggressively enforce its intellectual prop-

erty rights to the fullest extent of the law.

Note to CATV system installer

This reminder is provided to call the CATV system install-

er’s attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, speci-

fies that the cable ground should be connected to the

grounding system of the building, as close to the point

of cable entry as practical.

E8C1UCD_EN.indd 4E8C1UCD_EN.indd 4 2007/04/03 9:48:512007/04/03 9:48:51

Philco CDV210HH8 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info