Bedienungsanleitung Philco CDV210HH8 (Seite 25 von 26) (Englisch)

501682

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

–

cut here

Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for

broadcasting, see “RF Output Channel” section.

Select your language when turning this unit on for the first time.

Then press [B] to go to next step.

STANDBY-ON

Quick Use Guide

Please refer to “Basic TV Connection” on the front page before

you use this unit.

RF Output Channel

If channel 3 has been already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Press [SOURCE] on the unit so that the VCR SOURCE light is

lit.

• If noise appears on the TV screen, press [VCR/TV] on the

remote control.

4) Press [PLAY B] once.

5) After a few seconds, press and hold [PLAY B] on the unit for

3 seconds.

• The RF output channel will change to channel 4 from channel

3 and you will see a playback picture.

• When a picture does not appear on the TV screen, repeat

step 4.

6) Press [STOP C] to stop playback.

Connections

Clock Setup

Turn on the Unit for the First Time

VCR/DVD Switching

Installing the Batteries for the Remote

Control

STANDBY-ON REW F.FWD STOP/EJECT PLAY RECORD CHANNEL

OPEN/

VCR DVD

PREVSOURCE STOP PLAY NEXT

DISC IN PLAYREC TIMER

VCR DVD

SOURCE

DVD button

VCR button

STANDBY-ON

DISPLAY VCR DVD PAUSE

SLOW

VCR/TV

SKIP/CH.

PLAY

STOP

RECORD

SETUP TOP MENU

MODE ZOOM

SUBTITLE

T-SET

ANGLE

ENTER

RETURN

MODE

REPEAT A-B

OPEN/CLOSE

/EJECT

SPEED AUDIO

CLEAR/

C. RESET

123

456

789

+10

SOURCE button

DVD SOURCE light

VCR SOURCE light

VCR MODE

Press [VCR] on the remote control. (Verify that the VCR SOURCE

light is lit.)

DVD MODE

Press [DVD] on the remote control. (Verify that the DVD SOURCE

light is lit.)

No Please wait for a few minutes.

After scanning...

• The tuner stops on the lowest memorized channel.

• You can select only the channels memorized in this unit by using

[SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).

• If “AUTO SET UP” appears on the TV screen again, check the cable con-

nections. Then, press [B] once again.

Yes

Press [MENU] to exit.

Do you connect the cable from the cable box or the satellite box to the

unit’s ANT-IN jack?

Hint

• Pressing only [SOURCE] on the front panel DOES NOT switch the mode

of the remote control. You MUST select the correct mode on the remote

control.

Press [MENU] and select “CLOCK SET“.

Then press [B] to go to next step.

Select the current month.

Then press [B] to go to next step.

Select the current day.

Then press [B] to go to next step.

Select the current year.

Then press [B] to go to next step.

Select the current hour.

Then press [B] to go to next step.

Select the current minute.

Then press [B] to go to next step.

Select “AM” or “PM”.

To exit the CLOCK SET screen

• If the clock is not set, the CLOCK SET screen appears when you

press [MENU]. In this case, go to step 2.

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

CLOCK SET

MONTH DAY YEAR

1 0 / – – – – – –

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 – – – –

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 2 0 0 7

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : 4 0 – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : 4 0 P M AM

B PM

LANGUAGE SELECT

B ENGLISH [ON]

FRANCAIS

ESPAÑOL

Press [B] to start Auto Set Up.

CH 01

AUTO SET UP

YES

VCR

E8C1UCD_EN.indd 25E8C1UCD_EN.indd 25 2007/04/03 9:49:342007/04/03 9:49:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philco CDV210HH8 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info