Bedienungsanleitung Philco DVD3315V (Seite 21 von 28) (Englisch)

492070

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

PRECAUTIONS PREPARATION ADVANCED PLAYBACKBASIC OPERATIONS

RECORDING

OPTIONAL SETTINGS

TROUBLESHOOTING INFORMATION

EN EN

RECORDING

Timer Recording

VHSVHS

VHS

Press

VCR

first.

Press

SETUP

, use / to select

“TIMER PROGRAMMING”.

Then, press

to go to next step.

TIMER PROGRAMMING

PROG 12345678

DATE

START TIME

END TIME

L1/L2

REC SPEED

- M E N U -

B TIMER PROGRAMMING

SATELLITE LINK

AUTO REPEAT [OFF]

CLOCK SET

LANGUAGE SELECT

Available program

number blinks.

Use / to select an

empty program number. Then,

press

to go to next step.

PROGRAM NUMBER 1

DATE – – / – –

START TIME – – : – – – –

END TIME – – : – – – –

L1/L2 – –

REC SPEED – –

Use / to select

“ONCE“, “DAILY“ (Mon-Fri), or

“WEEKLY“. Then, press

to go to next step.

PROGRAM NUMBER 1

B ONCE

DAILY

WEEKLY

Use / to select the

desired month. Then, press

to go to the next step.

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 1 TUE

START TIME – – : – – – –

END TIME – – : – – – –

L1/L2 – –

REC SPEED – –

Then, repeat procedures above to select the day, start

time, end time, and “L1” or “L2” as well.

Use / to select

recording speed. Then, press

CLEAR

ONE TIME PROGRAM

PROGRAM NUMBER 1

DATE 1 0 / 2 1 TUE

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

L1/L2 L1

REC SPEED SP

B SP

SLP

To set another program after step 5, press .

Then, repeat procedures from steps 2 through 5.

You can program the unit to record up to 8 programs,

and up to 1 year in advance.

Press

TIMER SET

to set the timer standby mode.

The [TIMER REC] indicator on this unit lights up and

the unit goes to the DVD mode.

Note:

• To go back one step, press [

] during steps 3 to

• Select “L1” or “L2” to activate rear input jacks or

front input jacks accordingly.

To Check, Correct or Cancel a Timer Program To Check, Correct or Cancel a Timer Program

1) Press [TIMER SET], and then press [VCR ] on the

remote control.

2) Repeat procedures in step 1 above.

3) Use [K / L] to select the program number you want

to check. The details of the program you select will

appear on the TV screen.

Use [

] to go to the digit you want to change.

Then, use [K / L] to enter the correct numbers.

You can cancel the entire program by pressing [

]

while the program number blinks.

4) Press [CLEAR] to exit.

5) Press [TIMER SET] to return to the timer standby

mode.

To Cancel a Timer Recording in ProgressTo Cancel a Timer Recording in Progress

Press [STOP/EJECT C A] on the unit.

Note for Timer Recording & OTR

• If there is no cassette tape in the unit or the cassette

tape does not have the erase-protection tab,

the [TIMER REC] indicator blinks and timer recording

cannot be performed.

• If there is a power failure occurred or the unit is

unplugged for more than 30 seconds, clock setting and

all programmed timer recordings will be lost.

• If a cassette tape runs out before an OTR or a timer

recording is finished, the unit ejects the cassette tape.

After an OTR or a Timer Recording Has After an OTR or a Timer Recording Has

Been Set, This Unit Operates as Follows:Been Set, This Unit Operates as Follows:

• Press [TIMER SET] on the remote control or [STOP/

EJECT C A] on the unit, then press [VCR

] to activate

the VCR function again.

• To cancel the timer standby mode, press [TIMER SET] on

the remote control or [STOP/EJECT C A] on the unit,

then press [VCR

] to activate the VCR function again.

When an OTR or a Timer Recording is Completed. When an OTR or a Timer Recording is Completed.

• If “AUTO POWER OFF” function for DVD has been

activated and some timer programming are left, the

[TIMER REC] indicator lights up and the unit goes to the

timer standby mode.

• The [TIMER REC] indicator blinks if there are no more

timer programming.

• If auto power off for DVD has NOT been activated, the

unit goes to the DVD mode and all the VCR functions

will be unavailable. All the DVD functions are available

during OTR, timer standby mode and timer recording.

• Press [STOP/EJECT C A] on this unit or [TIMER SET]

on the remote control to use the VCR when the unit is

turned off.

To Use the DVD Player During Timer To Use the DVD Player During Timer

Recording or While the [TIMER REC] Recording or While the [TIMER REC]

Indicator is On or Blinking.Indicator is On or Blinking.

• Press [STANDBY-ON] to turn on the unit. Press [DVD ]

on the remote control to choose DVD mode. Then

continue with the other DVD features as described in

this manual.

E8KKSUD_DVD3315V_EN_v1.indd 21E8KKSUD_DVD3315V_EN_v1.indd 21 2009/05/27 13:20:432009/05/27 13:20:43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philco DVD3315V Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info