492068
10
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
10
EN
1A23
CONNECTIONS
Connecting to TV
AUDIO OUT
RL
VIDEO
ANT. IN
OUT
ANT. ΟUΤ
Rear panel of STB
Video cable
Audio cable
To video input jack
To audio input
jacks (L, R)
To antenna input jack
AND/OR
RF cable
Supplied cables used in this connection are as follows:
RF cable x1
Please purchase the rest of the necessary cables at your local store.
Before connecting, ensure the AC power cords of all devices are NOT connected to the AC outlets.
1 Refer to “Connecting an Antenna” on page 9 to connect the STB to an antenna.
2 Use an RF cable to connect the ANT. OUT jack on the STB to the antenna input jack on the TV.
AND/OR
Use a standard audio/video cable to connect the AUDIO/VIDEO OUT jacks on the STB to the audio/video
input jacks on the TV.
3 Plug all AC power cords into AC outlets, then turn all devices on.
4 If you want to view the analog TV channels also, make sure a conventional VHF/UHF antenna is
connected, then proceed to “Selecting RF OUT Channel” on page 19. If you want to view the digital TV
channels, select an appropriate external input channel on your TV (ch3 or ch4) (refer to your TV’s manual
for details), and also set the STB’s output channel to the corresponding channel number (3 or 4). You can
switch between 3 and 4 by holding [SETUP] down over 3 seconds or in the “Selecting RF OUT Channel”
section on page 19.
NOTE:
When using either of these connections, the resolution of the video signal output will always be 480i. This
ensures that all digital TV programming, no matter what the actual transmitted format is, will be viewable
and compatible with your analog TV.
If your TV is monaural (MONO) and has only one audio jack, connect a standard audio cable (white) from
the AUDIO OUT (white) jack on the STB to an audio input jack (white) on the TV. The red cable and jack
will not be used.
X6032UD_Book.indb 10X6032UD_Book.indb 10 11/28/2007 4:34:34 PM11/28/2007 4:34:34 PM
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philco TB100HH9 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info