Bedienungsanleitung Philips 14PV200 (Seite 8 von 24) (Englisch)

33113

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Manual TV channel search

In certain cases the ’Automatic TV channel search’ may not be

able to find all of the TV channels (e.g. coded TV channels). In

that case, use this manual method to set the channels.

a Press the MENU button on the remote control. The main

menu will appear.

b Select the line ’Installation’ with the P rB or

AP q button and confirm with the SqC button.

c Select the line ’Manual store’ with the P rB or

AP q button and confirm with the SqC button.

MANUAL STORE

Channel/Frequency FREQU.

Search 125

Fine tuning (,,,,,,n=,,,,,,$

Name edit xxx

Programme number 01

Decoder OFF

ã Exit:

« press MENU

d In the line ’Channel/Frequency’, select the

display for:

’FREQU.’: frequency

’CCH’: channel

’SCH’: special channel

e If you know the frequency or channel of the desired TV

channel, you can enter the data in line ’Search’ with

the digit buttons 0-9 .

DIf you don’t know the frequency or channel of the TV

channel of your choice, press the SqC button to

start the channel search.

f In the line ’Programme number’ select the

programme number you want e.g.: ’01’, using the

DSr or SqC button.

g If you want to change the TV channel name, press the

SqC button in line ’Name edit’.

E Select the character you want to change with the

DSr or the SqC button. Change the character

with the P rB or the AP q button. Select the next

character in the same way.

h Press the OK button to store the changes you have

made.

i If you want to change the automatic tv channel setting,

select the line ’Fine tuning’.

With the DSr or SqC button you can vary the

automatic tv channel setting. Important: This re-tuning is

only necessary and useful in special cases, e.g.: when

there are stripes on the picture with cable-TV systems.

j Press the OK button to store the TV channel.

DIf you want to search for further TV channels, start

again at step e.

k To end, press the MENU button.

Satellite receiver

You can receive channels from the satellite receiver via the

scart socket EXT.1 .

To do this, select the channel number ’E1’ with the

P pAB button. You will have to select the channels to be

received by the satellite receiver on the receiver itself.

Special installation functions

You can select one of the following installation functions in

order to adapt your TV-VIDEO Combi to your own specific

requirements.

Automatic TV channel search

Your TV-VIDEO Combi will search for all TV channels.

If you want to start the automatic TV channel search again,

then follow the instructions below.

a Press the MENU button on the remote control. The main

menu will appear.

b Select the line ’Installation’ with the P rB or

AP q button and confirm with the SqC button.

c Select the line ’Autoinstall’ with the P rB or

AP q button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 14PV200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 14PV200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info