Bedienungsanleitung Philips 14PV211 (Seite 19 von 24) (Englisch)

33121

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Use programmed recording to automatically start and stop a

recording at a later date.

To make a programmed recording, your TV-VIDEO Combi

needs to know:

* the date you want to make the recording;

* the programme number for the TV channel you want to

record;

* the start and stop time of the recording;

* whether you want to use VPS or PDC;

* the recording speed (SP/LP).

The TV-VIDEO Combi stores all the information in a TIMER

block. You can programme up to 6 TIMER blocks a month in

advance.

’VPS’ (Video Programming System) and

’PDC’ (Programme Delivery Control)

With ’VPS and PDC’, the TV station controls the start time and

the length of the recording. This means that the TV-VIDEO

Combi switches itself on and off at the right time even if a TV

programme you want to record begins earlier or finishes later

than expected.

Usually the start time is the same as the VPS or PDC time. But

if your TV guide gives a VPS or PDC time which is different to

the programme’s start time (for example, 20.15 and VPS 20.14),

you must enter ’20.14’ as the start time.

If you want to programme a time that is different from the VPS

or PDC time, you must switch off VPS or PDC.

Programming a recording

(with ’VIDEO Plus+’)

All the information required for a programming is contained in

the PlusCode programming number.

a Press the TIMER s button on the remote control.

b Select the line ’VIDEOPlus’ with the BP r or

AP q button and confirm with the SqC button.

c Enter the entire PlusCode programming number (up to 9

digits) printed in your TV guide next to the start time of a

TV programme.

For example, 5-234-89 or 5 234 89

Enter 523489 for the PlusCode programming number.

If you make a mistake, you can clear your instructions

with the CLEAR button.

VideoPlus

CODE REPEAT

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

123456((( ONCE

0-9 Store:

press OK

d In line ’REPEAT’ select the kind of programming

required with the BP r or AP q button.

’ONCE’: recording only once

’Mo-Fr’: recordings every day from Monday to Friday.

’Mo-Su’: recordings every day from Monday to Sunday.

’WEEKLY’: recordings every week on the same day of

the week.

e Confirm with the OK button. Your programming details

will then appear on the TV screen.

TIMER PROGRAMMING

VPS

DATEPROG. START END LP PDC REP.

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

15 xxx 15:36 15:50 - * ONCE

ã è Store:

« press OK

DIf VIDEO Plus+ does not recognise the TV channel,

’P??’ will appear on the TV screen. Instead of

’P??’, you can select the programme number you

want with the number buttons 0-9 .

DIf ’Code error’ appears on the TV screen, this

means you entered an incorrect PlusCode number

or the incorrect date. Correct your instructions or

end with the TIMER s button.

DIf ’Daily error’ appears on the TV screen, the

date was incorrectly entered.

7. PROGRAMMED RECORDING (TIMER)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 14PV211 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 14PV211

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info