Bedienungsanleitung Philips 14PV220 (Seite 22 von 28) (Englisch)

33125

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

e If you want to switch ’VPS/PDC’ on or off, select the entry

field ’START’ using the buttons QSr or

SqP . Switch ’VPS/PDC’ on or off using the button

SELECT .If’]’ appears on the screen, ’VPS/PDC’ has

been switched on.

DPlease check the start time. The section ’VPS (Video

Programming System) / PDC (Programme Delivery

Control)’ contains further information regarding

’VPS/PDC’.

f If all information is correct, press the OK button.

DThe programming information has been stored in a

TIMER block.

g Insert a cassette that is not erase protected.

h Switch off using the STANDBY m button.

The programmed recording will only function properly, if

the TV-Video Combi has been switched off using the

button STANDBY m .

DIf the TV-Video Combi is turned on a few minutes

before beginning a programmed recording or if is

being used for playback, ’PRESS OK TO START

RECORDING’ will appear on the screen.

Change cassettes if necessary.

Confirm this message with the button OK ,to

continue the programmed recording session. The

TV-Video Combi switches off during this operation.

DWhile a programmed recording is being made, you

cannot operate your video recorder manually. If you

would like to stop a programmed recording session,

press the button STANDBY m for more than 3

seconds.

DDuring recording, the red recording light at the front

of the machine (RECORD 5) will be alight.

DIf the end of the cassette is reached during a

recording, the TV-Video Combi will automatically

eject the cassette.

DIf you forgot to insert a cassette, ’NO CASSETTE’

will appear.

DIf you have inserted a cassette with erase protection

when you want to start a recording, the cassette will

be ejected automatically.

DIf ’ALL TIMERS OCCUPIED’ appears on the TV

screen when you press the TIMER k button, you

have used up all the available TIMER blocks. If you

want to clear or check a programmed recording

(TIMER block), select it with ;P q or =P r .

DProgramme number ’E1’ is provided for recording

from external sources (via the EXT scart socket).

Programming a recording

(without ’VIDEO Plus+’)

a Press the TIMER k button on the remote control twice.

The free TIMER block will be highlighted.

b Press the TIMER k button. The current information will

appear on the screen.

TIMER PROGRAMMING

VPS

DATE REP. PROG. START PDC END

01 ONCE 01 20:15 ] 21:30

REP.: SELECT STORE: OK

c Use the buttons SqP or QSr to select

different entry fields: ’DATE’ (Date), ’PROG.’ (Programme

number), ’START’ (Start time), ’END’ (End time).

Enter or change your information with ;P q or

=P r , or with the number buttons 0..9 .

DUse the SELECT button in the entry field ’DATE’to

select repetitive daily or weekly programming.

’ONCE’: One-time recording

’MO-FR’: Daily recordings from Monday through

Friday.

’WEEK.’: Recordings on the same day every week.

DUse the SELECT button in the entry field ’START’to

switch ’VPS/PDC’ on or off. If ’]’ appears on the

screen, the function has been switched on.

d If all information is correct, press the OK button.

DThe information has been stored in a TIMER block.

e Insert a cassette that is not erase protected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 14PV220 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 14PV220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info