Bedienungsanleitung Philips 14PV327 (Seite 13 von 24) (Englisch)

33143

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Playing a cassette

a Put a cassette into the cassette slot.

b Press the PLAY G button.

c If you press the STOP h button once, the TV-VIDEO

Combi will switch to pause. To stop, press the STOP h

button again.

d To eject the cassette, press the ? button on the

TV-VIDEO Combi or press the STOP h button on the

remote control several seconds.

DSome hired cassettes may have a poor picture or

poor sound quality. This is not a fault in your

machine. Please read `Picture interference´.

DSome functions switch off automatically after a

while (for example, pause, still picture, picture

search). This helps to protect the cassette and

avoids wasting power.

Playing NTSC cassettes

With this set you can play cassettes that have been recorded

on another video recorder in the NTSC standard (for example,

American cassettes).

DSome special features (for example, still picture) are not

possible while you are playing an NTSC cassette.

Tape position indication

DPress the OK button to display the current tape position.

DTo change the type of tape position display, proceed as

follows:

a During playback, press the MENU button.

b Select the line ’Tape’ with the menu buttons AP q or

P rB and confirm with the OK button.

c Select the line ’Tape counter’ with the menu

buttons AP q or P rB .

d With the menu buttons DSr or qSC select

’USED’ to check the time used, or ’LEFT’ to check the

time left on the tape.

e Confirm with the OK button.

Searching for tape position with the picture

(picture search)

a While a cassette is playing, press the H (reverse) or

I (forward) button once or several times.

b To stop at a certain picture, press the PLAY G button.

DDuring picture search, the picture quality may not be

so good and there will be no sound.

Still picture

a Press the STILL R button. A still picture will appear on

the screen.

b Each time you press STILL R again, the picture will

move on one step.

Searching for tape position without the

picture (wind and rewind)

a Stop the tape with the STOP h button.

b Press the H (reverse) or I (forward) button.

c To stop at a certain picture, press the STOP h button.

Instant View

With this function you can switch to picture search during

wind and rewind.

a If you hold the H (rewind) or I (wind) button

during wind or rewind, you will switch to picture search.

b When you release the button, the TV-VIDEO Combi will

automatically switch back to rewind or wind.

Automatic search for a tape position (index

search)

At the start of each recording, the TV-VIDEO Combi will write

an index code on the tape.

a Press the INDEX E button. Press the I button to

select the next code mark or the H button for the

previous code mark.

b When the TV-VIDEO Combi finds the code mark, it will

automatically switch to play.

5. PLAYBACK FUNCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 14PV327 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 14PV327

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info