Bedienungsanleitung Philips 14PV334 (Seite 27 von 28) (Englisch)

33145

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

If, contrary to expectation, you have any problems using this

TV-VIDEO Combi, it may be caused by one of the reasons

mentioned below. You can also call the customer service

centrein your country.

You will find the phone number in the enclosed guarantee

leaflet.

Your TV-VIDEO Combi does not respond to any button being

pressed:

• There is no power supply: check the power supply

• A programmed recording is currently being made: cancel the

programmed recording with the

STANDBY m button.

• Parental control is on: switch the parental control off.

• Continuous playback is on: switch the continuous playback off.

• There is a technical problem: switch off with the

8 power

switch for 30 seconds, then switch it on again.

Cassette is jammed in the TV-VIDEO Combi:

• Don’t use force. Switch off with the 8 power switch for 30

seconds, then switch it on again.

Remote control does not work:

• Remote control not pointed toward the TV-VIDEO Combi: point it

at the TV-VIDEO Combi.

• Batteries have run out: change the batteries.

No picture when you play a cassette:

• There is no recording on the cassette: change the cassette.

Poor picture quality when you play a cassette:

• The cassette badly worn or of poor quality: use new cassette.

• Tracking is not properly adjusted or the video heads are dirty:

turn to chapter ’PLAYBACK’ and read the section ’Cleaning the

video heads’.

• Read the section ’Eliminating picture interference’.

• You are playing a cassette with a LongPlay recording on it:

Excellent picture quality is only guarateed with recordings made

in StandardPlay recording speed.

The TV-VIDEO Combi will not record:

• The TV channel you want to record is not stored or you selected

the wrong programme number: check TV channels stored.

• You have loaded a cassette which cannot be recorded on: undo

the erase protection on the cassette.

Programmed recording does not work:

• You have not set the TIMER properly: check the TIMER blocks.

• You have programmed the wrong time or date: check time and

date.

• You have put in a cassette that cannot be recorded on: undo the

erase protection on the cassette.

• ’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC

or VPS time exactly to the minute. Have the aerial checked.

’Smart Clock’ setting does not work:

• You have stored a TV channel on programme number ’P01’ that

does not transmit TELETEXT: On ’

P01’ store a TV channel that

transmits TELETEXT.

• Poor TELETEXT reception: On ’

P01’ store a TV channel with

good TELETEXT reception.

• You have not activated the Smart Clock function: Switch the

function ’

ON’.

You hear a very short and soft noise coming from your

TV-VIDEO Combi at 3:00 at night:

• ’Smart Clock’ is checking the time: Switch off the Smart Clock

function.

TELETEXT does not start at page 100:

• You have stored a different preferred page: Store page 100 as

preferred page.

Technical terms used

Current tape position : The part of the tape currently being

played.

External source : A device connected via a socket (for

example, scart socket) which is transmitting audio/video

signals to the TV-VIDEO Combi.

Index marking : A marking which is automatically made on the

tape at the beginning of every recording. This marking

(recording ID) can be searched for with the Index search

function.

Scart cable : Also known as a Euro-AV cable. This standard

cable is an easy method of connecting various TV, audio and

video devices, such as a HIFI and Dolby Surround set, video

recorder, DVD player, SAT receiver, decoder, computer and

similar devices. Other signals in addition to audio and video

signals can be transmitted on it.

TV system : There are various systems for transmitting

television signals, for example, PAL, SECAM, PAL BG, SECAM

DK, SECAM L/L, NTSC etc. The system used by your television

depends on which country you are in.

TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.

OTR : One touch recording. This function enables you to select

the switch-off time in intervals of 30 minutes.

9. Before you call an engineer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 14PV334 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 14PV334

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info