EN
6
6
Manual TV channel search
In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.
1.
1.Press . The main menu will appear.
2.
2.Select 'TUNER SET UP' with and
confirm with .
3.
3.Select 'MANUAL TUNING' with
and confirm with
.
4.
4.Select 'PROG.' with
. Then press
.
5.
5.With
or
, select the desired
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press .
6.
6.Select 'CHANNEL' with , and con-
firm with . Then enter the desired chan-
nel with
.
When a channel is found,it will stop searching. If
this is the channel you want, press . If you
set
'
SKIP
'
on for a channel, this channel will be
ignored when going through the channels with
or .
To search for other TV channels, begin again at
step 4.
7.
7.To end, press
.
Using the satellite receiver
You can receive channels from the satellite
receiver via the scart socket .
To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys on the remote
control.You will have to select the channel you
want to receive on the satellite receiver itself.
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If you want to replace
the TV channels already saved with the new
ones, follow the instructions below.
1.
1.Press . The main menu will appear.
2.
2.Select 'TUNER SET UP' with and
confirm with .
3.
3.Select 'AUTO TUNING' with
and
confirm with
.
4.
4.The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.
5.
5.When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
B1
LCKB
B1
LCKB
MENU
0..9
AV1/EXT1
STATUS/EXIT
P–
P+
B1
0..9
B1
LCKB
B1
0..9
LCKB
B1
LCKB
B1
LCKB
B1
LCKB
MENU
MANUAL TUNING
→PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT KL CHOOSE B
END=EXIT
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
I don't know the channels for my TV stations In
this case, press in 'CHANNEL' to start
the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.
LCKB
PLEASE WAIT
START FINISH
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
