Bedienungsanleitung Philips 14PV503 (Seite 9 von 28) (Englisch)

33163

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Special installation functions

You can select one of the following installation functions in

order to adapt your TV-VIDEO Combi to your own specific

requirements.

Automatic TV channel search

Your TV-VIDEO Combi will search for all TV channels.

If you want to start the automatic TV channel search again,

then follow the instructions below.

a Press the MENU button on the remote control. The main

menu will appear.

b Select the line ’Installation’ with the P- B or

AP+ button and confirm with the SqC button.

c Select the line ’Autoinstall’ with the P- B or

AP+ button.

d Press the SqC button. The ’Automatic TV channel

search’ starts.

Searching...

CHANNELS FOUND: 06

Radio channels stored: 7

//////,,,,,,,,,,,,,,,,,,,,,

e When the TV channel search is complete,

’Installation comp.’ will appear on the

screen.

How to search for a TV channel manually, you can read in the

section ’Manual TV channel search’.

DIf you have programmed a recording (TIMER), a wake-up

timer or a sleep-timer, you can’t select the function

’Autoinstall’.

DAutomatic Channel Installation:

Some cable companies or broadcasters offer the

possibility to install TV channels automatically with ’ACI’.

Information about the installation offered and how to

select it, will appear on the screen.

This set will recognize and install TV channels with ’ACI’

automatically.

TV channels will be stored from programme number 1

onward.

If ’ACI’ cannot identify a TV channel, you can search for it

using the method as described in the section ’Manual TV

Channel Search’.

Searching for new TV channels

a Press MENU . The main menu will appear.

b Select the line ’Installation’ with the P- B or

AP+ button and confirm with the SqC button.

c Select the line ’Add new channels’ with the

P- B or AP+ button and confirm with the SqC

button.

Channel search will start.

d To store the TV channel, press OK .

e Repeat step d, until you have found all desired TV

channels.

DIf you have programmed a recording (TIMER), a

wake-up timer or a sleep-timer, you cannot select

the function ’Add new channels’.

Allocating a channel number

a Press the MENU button. The main menu will appear.

b Select the line ’Installation’ with the P- B or

AP+ button and confirm with the SqC button.

c Select the line ’Sort channels’ with the P- B or

AP+ button and confirm with the SqC button.

SORT CHANNELS

01 zzz 04 aaa

02 yyy 05 bbb

03 xxx 06 ccc

ã Exit: To move:

« press MENU press OK

d With the P- B , AP+ , DSr or SqC button,

select the TV channel to which you want to allocate a

programme number and press the OK button.

e With the P- B , AP+ , DSr or SqC button,

shift the TV channel to the programme number you wish

to allocate to this TV channel and press the OK button.

f Repeat steps dto euntil you have allocated a

programme number to all the required TV channels.

g To end, press the MENU button.

DIf you have programmed a recording (TIMER), a

wake-up timer or a sleep-timer, you can’t select the

function ’Sort channels’.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 14PV503 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 14PV503

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info