Bedienungsanleitung Philips 15HF5234 (Seite 23 von 25) (Englisch)

52407

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Glossary

DVI (Digital Visual Interface):A digital interface

standard created by the Digital Display

Working Group (DDWG) to convert analog

signals into digital signals to accommodate

both analog and digital monitors.

HDCP (High-bandwidth Digital-Content

Protection): developed by Intel to provide

secure copy protection of content transmitted

digitally from the source (such as DVD player

or set-top box) to the TV display.

RGB signals : These are the three video signals,

Red Green Blue, which make up the picture.

Using these signals improves picture quality.

S-VHS Signals: These are 2 separate Y/C video

signals from the S-VHS and Hi-8 recording

standards.The luminance signals Y (black and

white) and chrominance signals C (colour) are

recorded separately on the tape.This provides

better picture quality than with standard video

(VHS and 8 mm) where the Y/C signals are

combined to provide only one video signal.

NICAM sound: Process by which digital sound

can be transmitted.

System:Television pictures are not broadcast in

the same way in all countries.There are

different standards: BG, DK,I,and L L’.The

System setting (p. 6) is used to select these

different standards.This is not to be confused

with PAL or SECAM colour coding. Pal is used

in most countries in Europe, Secam in France,

Russia and most African countries.The United

States and Japan use a different system called

NTSC.The inputs EXT1 and EXT2 are used to

read NTSC coded recordings.

16:9: Refers to the ration between the length and

height of the screen.Wide screen televisions

have a ration of 16/9, conventional screen TV

sets have a ration of 4/3.

Tips

Poor reception

No picture

No sound

Snowy picture

when switched to

HD-D mode

PC mode doesn’t

work ?

Remote control

Standby

Cleaning the set

Still no results?

The proximity of mountains or high buildings may be responsible for ghost

pictures, echoing or shadows. In this case, try manually adjusting your picture: see

Fine Tune (p. 6) or modify the orientation of the outside aerial. If you are using an

indoor aerial, reception may be difficult in certain conditions.You can improve

reception by rotating the aerial. If the reception remains poor, you will need to

use an external aerial

Have you connected the aerial socket properly? Have you chosen the right

system? (p. 6). Poorly connected euroconnector cables or aerial sockets are often

the cause of picture or sound problems (sometimes the connectors can become

half disconnected if the TV set is moved or turned). Check all connections.

If on certain channels you receive a picture but no sound, this means that you do not have

the correct TV system. Modify the

System

setting (p. 6).

The amplifier connected to the TV does not deliver any sound? Check that you

have not confused the audio output with the audio input.

Noise is displayed if the connected digital equipment’s (DVD player or set-top

box) HDCP authentication failed. Check the user manual for the digital

equipment you are connecting.

Check that you have configured the computer on a compatible display resolution

(see p. 13).

The TV set does not react to the remote control; the indicator on the set no

longer flashes when you use the remote control? Replace the battery.

If the set receives no signal for 15 mins, it automatically goes into standby mode.

To save power, your set is fitted with components that give it a very low power

consumption when in standby mode (less than 1 W).

Only use a clean, soft and lint-free cloth to clean the screen and the casing of your

set. Do not use alcohol-based or solvent-based products.

Disconnect the mains plug of the TV for 30 seconds then reconnect it.

If your TV set breaks down, never attempt to repair it yourself: contact your

dealer's after-sales service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 15HF5234 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 15HF5234

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info