Bedienungsanleitung Philips 20HF5335D (Seite 19 von 25) (Englisch)

52401

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Using the radio

Choosing radio mode

& Press the

AV key on the remote control to

display the

Source List.

é Use the cursor </> key to select

FM Radio

and then press the cursor ≥ key to switch the

TV to radio mode.

To return to TV mode, press the AV key, select

TV and validate with ≥key.

In radio mode the number and name of the

station (if available), its frequency and the sound

mode are indicated on the screen.

Selecting programmes

Use the

0/9 or P -/+ keys to select the FM

stations (from 1 to 40).

List of radio stations

Press the ı key to display / hide the list of

radio stations.Then use the cursor to select a

station.

Using the radio menus

Use the

MENU key to access the specific radio

settings.

Searching radio stations

If you have used the quick installation all the

available FM stations will be stored.To start a

new search use the

Install menu : Auto Store

(for a complete search) or Manual Store (for

a station by station search).These menus work

in exactly the same way as the TV menus.

Screen saver

In the

Features menu you can activate / close

the screen saver.The time, the frequency of

the station and its name (if available) move

across the screen.

Using in PC monitor mode

PC Mode

Your TV can be used as a computer monitor.

You must first of all connect the computer and

adjust the resolution (see p.13).

Choosing PC mode

& Press the

AV key on the remote control to

display the

Source List.

é Use the cursor </> key to select

PC and

then press the cursor ≥ key to switch the TV

to PC mode (

DVI-I In).

To return to TV mode, press the AV key, select

TV and validate with ≥ key.

Using the PC menus

Press the

MENU key to access the specific

settings of the PC monitor mode. Use the

cursor to adjust them (the settings are

automatically saved):

• Picture:

Brightness / Contrast : to adjust the

brightness and contrast.

Horizontal / Vertical: to adjust the horizontal

and vertical placing of the image.

Colour Temp: to adjust the colours (cold,

normal or warm).

• Audio Selection: to choose the sound

reproduced on the TV (PC/HD,TV or Radio).

• Features (only available on certain versions):

Phase/Clock: eliminates the horizontal

(

Phase) and vertical (Clock) interfering lines.

Format : to choose between full screen or

native format of the PC screens.

Auto Adjust: position is set automatically.

• Reset To Factory Setting: to return to the

factory settings (default settings).

NOTE

– When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is

operated under electromagnetic interference environment but will not affect the performance of this product.

– For better performance, good quality DVI cable with good noise isolation filter is recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 20HF5335D Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 20HF5335D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info