Bedienungsanleitung Philips 20PV184 (Seite 9 von 12) (Englisch)

33199

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Programming with ’VIDEOPlus+’

All the information required for programming is encoded in

the ’VIDEOPlus+’ code.

1 Press the

SV/V+

button on the remote control.

2 Enter the entire ’VIDEOPlus+ code’. This code (up to 9

digits) is found next to the start time of a TV programme

in your TV guide.

If you entered an incorrect code number, clear it with the

CLEAR

button.

VIDEOPLUS

CODE

DAILY/WEEKLY ONCE

PROGRAMME NR. 01

xy 0-9 OK

3 If you want to repeat programming at daily or weekly

intervals, select the required setting in the ’DAILY/WEEK-

LY’ line.

’Daily’ programming can only be used for recordings to

be made from Mondays to Fridays inclusive.

4 After the confirmation the corresponding data appears on

the TV screen.

Note: If you use ’VIDEOPlus+’ for the first time, the

’PROGRAMME NR.’ line appears when you enter the

’VIDEOPlus+’ code. Enter the required programme num-

ber for this TV channel.

DATE DW PR START END d

01 01 17:15 18:45

vw xy 0-9 OK

5 Confirm with the

button.

The data has been stored in a TIMER block.

Please ensure that you loaded a cassette without erase

protection.

6 Press the

STANDBY m

button.

How to enter, check or clear a TIMER

block manually

1 Press the

TIMER k

button.

2 Select a free TIMER block or the TIMER block you want

to check or clear.

3 Clear: Press the

CLEAR

button.

4 Enter/Check: Press the

button to switch

between ’DATE’ (date), ’DW’ (daily, weekly), ’PR’ (pro-

gramme number), ’START’ (start time) and ’END’ (end

time).

Press the

and the

, or the

0-9

buttons to

change the data.

5 To end programming, press the

button.

6 Press the

STANDBY m

button.

Important notes for programmed recordings

• If the message ’PLEASE PRESS STOP’ or ’PLEASE PRESS

STANDBY’ appears on the TV screen, press the

STOP h

or the

STANDBY m

button.

A TIMER recording will function only, if the set isn’t used

for other video recorder functions (e.g.: playback).

• The TIMER lamp on the front of the set lights up when

one or more of the TIMER blocks are occupied.

• If the end of the cassette is reached during a recording,

the video recorder automatically ejects the cassette. The

set switches off after a few minutes.

• If you forget to load a cassette, ’NO CASSETTE CANNOT

RECORD’ will appear.

• If you inserted a cassette with erase protection when you

want to start a recording, the cassette will be ejected.

• If ’CODE ERROR’ appears on the TV screen, you entered

an incorrect code number or the incorrect date. Repeat

the entry or end with the

STANDBY m

button.

With ’Daily’ programming, the first recording must take

place within a week.

• If ’DAILY ERROR’ appears on the TV screen, the date was

incorrectly entered. ’Daily’ programming can only be used

for recordings to be made from Mondays to Fridays

inclusive.

• The programmed recording will always be made at the

recording speed (SP/LP) that has already been selected

on the TV Combi.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 20PV184 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 20PV184

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info