Bedienungsanleitung Philips 21PV330 (Seite 22 von 28) (Englisch)

33207

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

h If you have confirmed with the OK button, exit the menu

with the TIMER s button.

E The programming information has been stored in a TIMER

block.

i Make sure that the cassette you have put in can be

recorded on.

Automatic recording from a satellite

receiver (SAT RECORDING)

You can use this function if you own a satellite receiver that

can control other machines via a scart cable and a

programming function.

a Press TIMER s on the remote control.

b Select the line ’TIMER PROGRAMMING’ with the

BP r or AP q button and confirm with SqC .

TIMER PROGRAMMING

VPS

DATEPROG. START END LP PDC REP.

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

-- -- --:-- --:--- - -----

ã Exit: Start:

« press TIMER press è

c Press SqC .

TIMER PROGRAMMING

VPS

DATEPROG. START END LP PDC REP.

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

15 xxx 15:36 15:50 - * ONCE

ã è Store:

« press OK

d Select the entry field ’PROG.’ with the DSr or

SqC button. Select ’Record prepared’ with

the BP r or AP q button.

e Confirm with the OK button.

Your TV-VIDEO Combi is now prepared for recording. The

start and end of the recording is controlled via the scart

cable.

f To end, press the TIMER s button.

g Place a cassette in the machine.

E If you have not connected the satellite receiver yet, use a

scart cable to connect scart socket EXT. 1 on the

TV-VIDEO Combi to the corresponding scart socket on

the satellite receiver.

h Programme the satellite receiver with the required

information (programme number on the SAT receiver,

start time, end time).

DThe information on how to programme your satellite

receiver can be found in the instruction manual for

your satellite receiver.

Activating a recording from the SAT

receiver with OTSR (OTSR = One Touch Sat

Recording)

In the previous paragraph we described how to prepare the

TV-VIDEO Combi for recording from the SAT receiver by

means of the menu (step a through f ). OTSR will allow

you to record a SAT programme fast and easy with just one

button press.

a Press the Sr/q buttons at the same time until the

timer light on your TV-VIDEO Combi starts blinking. It will

blink three times and will then stay alight.

Your TV-VIDEO Combi is now prepared for recording. The

start and end of the recording is controlled via the scart

cable.

DEach time you programme a recording on the

satellite receiver, you must prepare your TV-VIDEO

Combi for recording. Each time you prepare your

TV-VIDEO Combi for a satellite recording a

TIMER-block will be reserved and the TIMER light at

the front will blink.

DIf the TIMER light does not blink, you have not set

the clock or all TIMER-blocks have been used up.

Please read the paragraph ’Setting the time and

date’ or ’How to clear a programmed recording

(TIMER)’.

DIf you want to cancel the programmed SAT

recording, follow the procedure described in the

paragraph ’How to clear a TIMER’.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 21PV330 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info