Bedienungsanleitung Philips 21PV715 39 (Seite 22 von 29) (Englisch)

33223

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

c Press C .

TIMER PROGRAMMING

VPS

DATEPROG. START END LP PDC REP.

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

15 xxx 15:36 15:50 - * ONCE

Store:

press OK

d Select the entry field ’PROG.’ with the D or C

button. Select ’Record prepared’ with the B or

A button.

e Confirm with the OK button.

Your TV-VIDEO Combi is now prepared for recording. The

start and end of the recording is controlled via the scart

cable.

f To end, press the TIMER s button.

g Place a cassette in the machine.

E If you have not connected the satellite receiver yet, use a

scart cable to connect scart socket EXT. 1 on the

TV-VIDEO Combi to the corresponding scart socket on

the satellite receiver.

h Programme the satellite receiver with the required

information (programme number on the SAT receiver,

start time, end time).

DThe information on how to programme your satellite

receiver can be found in the instruction manual for

your satellite receiver.

Activating a recording from the SAT

receiver with OTSR (OTSR = One Touch Sat

Recording)

In the previous paragraph we described how to prepare the

TV-VIDEO Combi for recording from the SAT receiver by

means of the menu (step a through f ). OTSR will allow

you to record a SAT programme fast and easy with just one

button press.

a Press the Sr/q buttons at the same time until the

timer light on your TV-VIDEO Combi starts blinking. It will

blink three times and will then stay alight.

Your TV-VIDEO Combi is now prepared for recording. The

start and end of the recording is controlled via the scart

cable.

DEach time you programme a recording on the

satellite receiver, you must prepare your TV-VIDEO

Combi for recording. Each time you prepare your

TV-VIDEO Combi for a satellite recording a

TIMER-block will be reserved and the TIMER light at

the front will blink.

DIf the TIMER light does not blink, you have not set

the clock or all TIMER-blocks have been used up.

Please read the paragraph ’Setting the time and

date’ or ’How to clear a programmed recording

(TIMER)’.

DIf you want to cancel the programmed SAT

recording, follow the procedure described in the

paragraph ’How to clear a TIMER’.

How to check or change a TIMER

a Press the TIMER s button on the remote control.

b Select the line ’TIMER PROGRAMMING’ with the

menu buttons B or A and confirm with the C

button.

c Select the TIMER you want to check or change with the

B or A button and confirm with the OK button.

d Select the entry field with the D or C button.

e Change any information with the B or A button or

with the 0-9 buttons.

DUnder ’LP’, use the B or A button to select the

recording speed ’SP’ or ’LP’.

f Confirm with the OK button.

g To end, press the TIMER s button.

h Make sure that the cassette you have put in can be

recorded on.

How to clear a TIMER

a Press the TIMER s button on the remote control.

b Select the line ’TIMER PROGRAMMING’ with the

menu buttons B or A and confirm with the C

button.

c Select the TIMER you want to clear with the menu

buttons B or A .

d Press the CLEAR button.

e Switch off with the TIMER s button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 21PV715 39 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 21PV715 39

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info