Bedienungsanleitung Philips 22HFL3232D (Seite 53 von 56) (Englisch)

706219

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

English

HDMI connection issues

There are problems with HDMI devices:

= Note that HDCP (High-bandwidth Digital

Content Protection) support can delay

the time taken for a TV to display content

from a HDMI device.

= If the TV does not recognise the HDMI

device and no picture is displayed, try

switching the source from one device to

another and back again.

= If there are intermittent sound

disruptions, check that output settings

from the HDMI device are correct.

= If you use an HDMI-to-DVI adapter

or HDMI-to-DVI cable, check that an

additional audio cable is connected to

AUDIO (mini-jack only).

Computer connection issues

The computer display on the TV is not stable:

= Check that your PC uses the supported

resolution and refresh rate.

= Set the TV picture format to unscaled.

If you cannot resolve your problem, refer to the

FAQs for this product at www.philips.com/support.

If the problem remains unresolved, contact Philips

Consumer Care in your country as listed in the

Addendum.

Warning

 Do not attempt to repair the product yourself.

This may cause severe injury, irreparable

damage to your product or void your

warranty.

Note

 Make a note of your TV model and serial

number before you contact Philips. These

numbers are printed on the back of the TV

and on the packaging.

There is poor picture quality from connected

devices:

= Check that the devices are connected

properly.

= Check that the picture settings are

correctly set.

The TV did not save your picture settings:

 Check that the TV location is set to the

home setting. This mode offers you the



>?

big or too small:

= Try using a different picture format.

The picture position is incorrect:

= Picture signals from some devices may



signal output of the device.

Cannot remove ‘e-sticker’ banner displayed on

the TV.

= To remove the logos and images, set the

location of your TV to home.

1. Press

MENU.

2. Select [Setup] > [Installation] >

[Preferences] > [Location].

3. Select [Home] and press OK.

Sound issues

There is a picture but sound quality is poor:

Note

 If no audio signal is detected, the TV

automatically switches the audio output off —

this does not indicate malfunction.

= Check that all cables are properly

connected.

= Check that the volume is not set to 0.

= Check that the sound is not muted.

There is a picture but the sound quality is

poor:

= Check that the sound settings are

correctly set.

There is a picture but sound comes from one

speaker only:

= Verify that sound balance is set to the

centre.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 22HFL3232D Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 22HFL3232D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info