476603
23
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
PrimeSuite xxHFL4373D/10 Page 23
[Enable Subtitles]
Enables or disables the use of subtitles in a
DVB broadcast channel:
[Off]: No subtitles services available (Prison
Mode)
[On]: Subtitles services available
[Enable Channel Map]
Select Channel Map to be viewed:
[Native]: Show standard default channel
map
[BDS]: To be used only if a STB is
connected
[Power settings]
[Power on]
The power on function allows the TV to enter a
specific mode ([On], [Standby], or [Last status]) of
operation when the mains power is activated (cold
start):
[On]: The TV will always turn on (show startup
channel) after the mains power is
activated.
[Standby]: When set, the TV will always turn to
standby (status as defined in Low power
standby option) after the mains power is
activated.
[Low power standby]
The Low power standby option defines the TV to
enter a specific standby mode after pressing the
On/Off button on the remote control. To wake-up
the TV both On/Off button on the RC or TV can
be pressed:
[Fast]: The TV will quickly turn on (show startup
channel. (This mode is having more
power consumption then the Green
mode).
[Green]: The TV will slower turn on (show
startup channel) then the Fast. (This
mode is having less power consumption
then the Fast mode).
[Smart power]
The power consumption for the Smart power
mode is defined by the Smart Picture setting in
the TV Setup part.
[Off]: The TV will start with Standard Smart
Picture setting, but the setting can be
changed in the guest setup mode.
[On]: The TV will start with default Smart
Picture setting and Smart Picture setup
and is not selectable in the guest setup
mode.(with this the power consumption
mode is predictable).
[Auto switch off]
Enables or disables the use of automatic switch
off the TV if no RC action is noticed after 240
minutes:
[Off]: TV will not switch off after 240 minutes
[On]: TV will switch of after 240 minutes
[Delayed reboot]
Enables or disables the use of delayed
standby:
[Off]: No delay added when guest presses
‘Off’ button.
[On]: Delay added when guest presses ‘Off’
button before going into standby; in case
of a wrong guest interaction, activating
the TV after this will be done directly
without any startup delay.
[Clock settings]
[Display Standby]
Defines the brightness level for the Clock LCD
backlight if the TV is in Standby mode:
[Set]: Off, 1, 2, 3, 4, 5
[Display On]
Defines the brightness level for the Clock LCD
backlight if the TV is in On mode:
[Set]: Off, 1, 2, 3, 4, 5
[Time Setting]
This is only available if the Time Download is set
to Manual and can be used to set the clock with
the remote control:
[Set]: Time entry field [xx:xx Hr]
Time to be set by using arrow keys and numeric
buttons
[Time Download]
Select source for clock time:
[Automatic]:
Clock time is retrieved from the
Download Program channel.
[Manual]:
The clock time is set using the Time
Setting option.
[Download Country]
Set selected country as source for clock time.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 22HFL4373D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info