Bedienungsanleitung Philips 22PFL3557H (Seite 18 von 59) (Englisch)

525768

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

EN 18

Change disc player settings

CAUTION: Most of the settings are already

configured with the best value for the disc

player. Unless you have a specific reason to

change a setting, it is best to leave it at the

default value.

1. While you watch a DVD, press LIST

to access the DVD settings menu.

2. Use the Navigation buttons to navigate

the menu and OK to confirm your selection.

3. Press LIST to exit.

Note:

 You cannot change a setting that is

greyed out.

 If you select a setting that is not

available on the disc, the default setting

is used.

General settings

1. While you watch a DVD, press LIST

and then select [General].

2. Select a setting to change, then press OK:

 [TV display]: Select a picture display

format to fit the TV screen (only

available when the disc is not playing).

 [4:3 Panascan]: For a TV with

aspect ratio of 4:3. Full-height display

with trimmed sides.

 [4:3 Letter Box]: For a TV with

aspect ratio of 4:3. Wide-screen display

with black bars on the top and bottom

of the screen.

 [16:9]: For wide-screen TV. The

aspect ratio is 16:9.

 [Menu language]: Select the on-screen

display menu language. The number of

menu languages available on the disc

player may be different from that on

the TV.

 [Screen saver]: Enable screen saver

mode. If enabled, the screen enters idle

mode after 5 minutes of inactivity (for

example, in pause or stop mode).

 [Disc lock]: Select [On] to lock the disc

in the disc compartment. If locked, you

need to enter the password to access

the disc every time you play the locked

disc. If you forget your password, enter

'8888' to reset.

 [Last memory]: Enable last memory

option. If enabled, the player

automatically resumes play from the last

stop point.

Audio settings

1. While you watch a DVD, press LIST

and then select [Audio].

2. Select [SPDIF setup], then press OK.

3. Select a setting to adjust, then press OK:

 [SPDIF output]: Set the type of digital

audio output to disc player and other

digital audio systems.

 [BITSTREAM]: Output original or

raw digital audio.

 [PCM]: Output raw audio that is

converted to PCM.

 [LPCM Out]: Select the audio sampling

rate. The higher the sampling rate, the

better the sound quality.

Preference settings

Note: You need to stop DVD playback

before you can access the preference

settings.

1. In DVD mode, press LIST and then

select [Preference].

2. Select a setting to change, then press OK:

 [VCD PBC]: Display or skip the

content menu for VCD and SVCD

discs.

 [Audio]: Select audio language for disc.

 [Subtitle]: Select subtitle language for

disc.

 [Disc menu]: Select language for disc

menu.

 [Parental]: Restrict access to discs that

are recorded with parental ratings. To

play all discs irrespective of the rating,

select level '8'.

 [Password setup]: Set or change the

PIN code to play a restricted disc.

 [Password mode]: Enable

password settings.

 [Password]: Set or change the

password for locked discs and

restricted disc playback. Enter '8888' to

reset the password.

 [Default]: Reset the disc player to the

default factory settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 22PFL3557H Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 22PFL3557H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info