Bedienungsanleitung Philips 22PFL4008K (Seite 27 von 61) (Englisch)

525801

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN 27

English

3. Select [Digital: Reception test] > [Search

channel], then press OK.

4. Press the Numeric buttons to enter the

channel frequency.

5. Select [Search], then press OK.

6. When the channel is found, select [Store],

then press OK.

Fine-tune analogue channels

If the reception of an analogue TV channel is

poor, you can fine-tune the TV channel.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual installation] >

[Fine tune], then press OK.

4. Press or to fine-tune the channel.

5. When you have selected the correct

channel frequency, select [Done], then press

OK.

6. Select an option, then press OK.

 [Store current channel]: Store the

channel under the current channel

number.

 [Store as new channel]: Store the

channel under a new channel number.

Update channel list

When the TV was switched on for the first

time, a full installation of channels was

performed. By default, when there are

changes to these channel lists, the TV

updates them automatically. You can also

switch off the automatic update or manually

update the channels.

Note: If you are prompted to enter a code,

enter '8888'.

Automatic update

To add or remove digital channels

automatically, leave the TV in standby mode.

The TV updates channels and stores new

channels everyday. Empty channels are

removed from the channel list.

Switch off the channel update message

If a channel update is performed, a message

is displayed at startup. You can switch off this

message.

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings].

3. Select [Channel installation] > [Channel

update message].

4. Select [Off], then press OK.

Switch off automatic updates

In the [Channel installation] menu, select

[Automatic channel update] > [Off].

Update channels manually

1. Press .

2. Select [Setup] > [Search for channels] >

[Update channels], then press OK.

3. Follow the onscreen instructions to

update the channels.

Copy channels

ATTENTION: This feature is intended for

dealers and service personnel.

You can copy channel lists from one Philips

TV to another through a USB storage

device. You do not need to search for

channels or install them again on the second

TV. The channel list file is small enough to fit

on any USB storage device.

What you need

Two Philips TVs that have these properties:

 The same country setting

 The same year range

 The same DVB type, as indicated by

the suffix (H, K, T, D/00) in the model

name

 The same settings for satellite channels,

including the number of LNB satellites

 The same hardware type, as indicated

by the sticker on the back of the TV.

For example: TPM10.3E LA.

 Compatible software versions

Note: If you are prompted to enter a code,

enter '8888'.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 22PFL4008K Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 22PFL4008K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info