Bedienungsanleitung Philips 22PFS4031 (Seite 45 von 62) (Englisch)

646978

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

2. On the screen where you can start searching for

satellites, select Settings and press OK.

3. Select the number of satellites you want to install

or select one of the Unicable systems. When you

select Unicable, you can choose the User Band

Numbers and enter the User Band Frequencies for

each tuner.

4. When you're done, select Next and press OK.

5. On the Settings menu, press the colour

key



Done to return to the screen to start

searching for satellites.

Homing Transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB valeus which you can enter here.

Channel Packages

Satellite operator can offer channel packages that

bundle free channels (free-to-air) and offer a sorting

that suits a country. Some satellites offer subscription

packages - a collection of channels you pay for.

If you choose a subscription package, the TV might

ask you to select a Quick or Full installation.

Select Satellite operator channels only to install the

channels of the package only or select All satellite

channels to install the package and all other

available channels too. We recommend a Quick

installation for subscription packages. If you have

additional satellites that are not part of your

subscription package, we recommend a Full

installation. All installed channels are put in the

channels list All.

If you choose a subscription package, the TV might

ask you to select a Quick or Full installation.

Select Quick to install the channels of the package

only or select Full to install the package and all

other available channels too. We recommend a Quick

installation for subscription packages. If you have

additional satellites that are not part of your

subscription package, we recommend a Full

installation. All installed channels are put in the

channels list All.

Unicable setup

The unicable system

You can use a Unicable system to connect the

antenna dish to the TV.A Unicable system uses one

cable to connect the satellite dish to all satellite

receivers in its system. Unicable is typically used in

apartment buildings. If you use a Unicable system, the

TV will ask you to assign a user band number and

corresponding frequency during the installation. You

can install 1 or 2 satellites with Unicable on this TV.

If you notice some missing channels after a Unicable

installation, another installation might have been

done at the same moment on the Unicable system.

Do the installation again to install the missing

channels.

User band number

In a Unicable system, each connected satellite

receiver must be numbered (e.g. 0, 1, 2 or 3 etc.).

You can find the available user bands and their

number on the Unicable switchbox. User band is

sometimes shortened as UB. There are Unicable

switchboxes that offer 4 or 8 user bands. If you select

Unicable in the settings, the TV will ask you to assign

the unique user band number for its built-in satellite

receiver. A satellite receiver cannot have the same

user band number as another satellite receiver in the

Unicable system.

User band frequency

Next to the unique user band number, the built-in

satellite receiver needs the frequency of the selected

user band number. These frequencies are mostly

shown next to the user band number on a Unicable

switchbox.

Automatic channel update

If you receive digital channels, you can set the TV to

automatically update the list with new channels.

Alternatively, you can start a channel update yourself.

Automatic channel update

Once a day, at 6 AM, the TV updates the channels

and stores new channels. New channels are stored in

the All channels list but also in the New channels list.

Empty channels are removed.

If new channels are found or if channels are updated

or removed, a message is shown at TV start up. The

TV must be in standby to automatically update

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 22PFS4031 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 22PFS4031

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info