639192
38
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
during the countdown.
3. Press
(left) repeatedly if necessary, to close the
menu.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1. Press
, select Eco settings and press
(right)
to enter the menu.
2. Select Switch off timer and press OK.
3. Press the arrows
(up) or
(down) to adjust
the value. The value 0 deactivates the automatic
switch off.
4. Press
(left) repeatedly if necessary, to close the
menu.
EasyLink
EasyLink
To switch off EasyLink completely…
1. Press
, select General settings and
press
(right) to enter the menu.
2. Select EasyLink, press
(right) and
select EasyLink one step further.
3. Select Off.
4. Press
(left) repeatedly if necessary, to close the
menu.
EasyLink remote control
To switch off EasyLink remote control…
1. Press
, select General settings and
press
(right) to enter the menu.
2. Select EasyLink > Easylink remote control, and
press OK.
3. Select Off.
4. Press
(left) repeatedly if necessary, to close the
menu.
Location
If the TV is installed in a shop, you can set the TV to
display an in store promotion banner. Picture
style is set to Vivid automatically. Switch off
timer is switched off.
To set the TV to Shop location…
1. Press
, select General settings and
press
(right) to enter the menu.
2. Select Location > Shop, and press OK.
3. Press
(left) repeatedly if necessary, to close the
menu.
If you use the TV at home, set the TV in Home
location.
Shop setup
If the TV is set to Shop, you can set the availablility of
a specific demo for in store use.
1. Press
, select General settings and
press
(right) to enter the menu.
2. Select Commercial banner and press
(right) to
enter the menu.
3. Select On or Off.
4. Press
(left) repeatedly if necessary, to close the
menu.
Factory settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings…
1. Press
, select General settings and
press
(right) to enter the menu.
2. Select Factory settings and press OK.
3. Press
(left) repeatedly if necessary, to close the
menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1. Press
, select General settings and
select Reinstall TV.
2. Follow the instructions on screen. The installation
may take a few minutes.
38
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 22PHT4031 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips 22PHT4031

Philips 22PHT4031 Bedienungsanleitung - Deutsch - 67 seiten

Philips 22PHT4031 Bedienungsanleitung - Holländisch - 64 seiten

Philips 22PHT4031 Bedienungsanleitung - Französisch - 65 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info