Bedienungsanleitung Philips 231S4LS (Seite 30 von 52) (Englisch)

514597

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

5 . PowerSensor™

5. PowerSensor™

How does it work?

• PowerSensor works on principle of

transmission and reception of harmless

“infrared” signals in order to detect user-

presence.

• When the user is in front of the monitor,

the monitor operates normally, at the

predetermined settings that the user has

set- i.e. brightness, contrast, color, etc

• Assuming that the monitor was set to

100% of brightness for example, when the

user leaves his seat and is no longer in front

of the monitor, the monitor automatically

reduces the power consumption upto 80%.

User present in front User not present

ttaW

Power consumption as illustrated above is for reference purpose only

Setting

Default settings

PowerSensor is designed to detect the presence

of the user located between 30 and 100 cm (12

and 40 inches) from the display and within ve

degrees left or right of the monitor.

Custom settings

If you prefer to be in a position outside the

perimeters listed above, choose a higher

strength signal for optimal detection efciency:

The higher the setting, the stronger the

detection signal. For maximum PowerSensor

efciency and proper detection, please position

yourself directly in front of your monitor.

• If you choose to position yourself more

than 100 cm or 40 inches from the

monitor use the maximum detection signal

for distances up to 120 cm or 47 inches.

(Setting 4)

• Since some dark colored clothing tends to

absorb infrared signals even when the user

is within 100 cm or 40 inches of the display,

step up signal strength when wearing black

or other dark clothes.

Hot key Sensor distance

Landscape/Portrait mode

(for selective models)

Above illustrations are for reference purpose only, may not reect the

exact display of this model.

How to adjust settings

If PowerSensor is not operating correctly

inside or outside the default range, here’s how

to fine-tune detection:

• Customize the USER button to serve as

PowerSensor hot key. Refer to user manual

”Customize your own ”USER” key section.

(If your display is with “Sensor” hot key, go

to next step.)

• Press the PowerSensor hot key.

• You will find the adjustment bar.

• Adjust the PowerSensor detection

adjustment to Setting 4 and press OK.

• Test the new setup to see if PowerSensor

properly detects you in your current

position.

• PowerSensor function is designed to work

in Landscape mode (horizontal position)

only. After PowerSensor turn on it, it will

automatically turn Off if the monitor is

used in Portrait mode (90 degree/vertical

position); it will automatically turn ON if

monitor is returned to its default Landscape

position.

Note

A manually selected PowerSensor mode

will remain operational unless and until it is

readjusted or the default mode is recalled. If

you nd that the PowerSensor is excessively

sensitive to nearby motion for some reason,

please adjust to a lower signal strength.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 231S4LS Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 231S4LS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info