Bedienungsanleitung Philips 231S4LS (Seite 48 von 52) (Englisch)

514597

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

10. Troubleshooting & FAQs

• Eliminate the vertical bars using the Phase/

Clock of Setup in OSD Main Controls. It is

valid only in VGA mode.

Image appears blurred, indistinct or too dark

• Adjust the contrast and brightness on

On-Screen Display.

An "after-image", "burn-in" or "ghost image"

remains after the power has been turned off.

• Uninterrupted display of still or static

images over an extended period may cause

"burn in", also known as "after-imaging "

or "ghost imaging", on your screen. "Burn-

in", "after-imaging", or "ghost imaging" is a

well-known phenomenon in LCD panel

technology. In most cases, the "burned in"

or "after-imaging" or "ghost imaging" will

disappear gradually over a period of time

after the power has been switched off.

• Always activate a moving screen saver

program when you leave your monitor

unattended.

• Always activate a periodic screen refresh

application if your LCD monitor will display

unchanging static content.

• Failure to activate a screen saver, or a

periodic screen refresh application may

result in severe “burn-in” or “after-image”

or “ghost image” symptoms that will not

disappear and cannot be repaired. The

damage mentioned above is not covered

under your warranty.

Image appears distorted. Text is fuzzy or

blurred.

• Set the PC’s display resolution to the same

mode as monitor’s recommended screen

native resolution.

Green, red, blue, dark, and white dots appears

on the screen

• The remaining dots are normal

characteristic of the liquid crystal used in

today’s technology, Please refer the pixel

policy for more detail.

The "power on" light is too strong and is

disturbing

• You can adjust “power on” light using the

power LED Setup in OSD main Controls.

For further assistance, refer to the Consumer

Information Centers list and contact Philips

customer service representative.

10.2 USB docking display FAQs

Q1. My monitor is not recognized by my

laptop OS.

Ans.:

• Ensure that you have installed the supplied

driver/ software bundled with you monitor.

• You can download latest “Displaylink” driver

from http:// www.displaylink.com/support/

downloads.php

• You may have to re-boot your laptop

in order to recognize the USB monitor

correctly.

Q2. Why I can’t see DOS or BIOS pictures

while using this display?

Ans.: You can see DOS or BIOS pictures via

VGA cable.

Q3. My monitor does not start up with my

stand alone desktop PC/ I cannot see

anything with Desktop PC.

Ans.: Please note that the USB monitor not

designed to work with DOS yet. It

is meant to be used as a “secondary

display”, therefore it must be used with

a Laptop type of computer which has

a permanent primary display attached

to it. This is because USB monitor will

display images only after the Windows

monitor is recognized by the system.

Q4. Can I use USB 2.0 cable to connect

USB docking display?

Ans.: We suggest you to use USB3.0 for better

efciency, USB2.0 cable is workable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 231S4LS Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 231S4LS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info