Bedienungsanleitung Philips 241P6 (Seite 27 von 53) (Englisch)

578540

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

4. PowerSensor™

How does it work?

• PowerSensor works on principle of

transmission and reception of harmless

“infrared” signals in order to detect user-

presence.

• When the user is in front of the monitor,

the monitor operates normally, at the

predetermined settings that the user has

set- i.e. brightness, contrast, color, etc

• Assuming that the monitor was set to

100% of brightness for example, when the

user leaves his seat and is no longer in front

of the monitor, the monitor automatically

reduces the power consumption upto 80%.

User present in front User not present

ttaW

Power consumption as illustrated above is for reference purpose only

Setting

Default settings

PowerSensor is designed to detect the presence

of the user located between 30 and 100 cm (12

and40inches)fromthedisplayandwithinve

degrees left or right of the monitor.

Custom settings

If you prefer to be in a position outside the

perimeters listed above, choose a higher

strengthsignalforoptimaldetectionefciency:

The higher the setting, the stronger the

detection signal. For maximum PowerSensor

efciencyandproperdetection,pleaseposition

yourself directly in front of your monitor.

• If you choose to position yourself more

than 100 cm or 40 inches from the

monitor use the maximum detection signal

for distances up to 120 cm or 47 inches.

(Setting4)

• Since some dark colored clothing tends to

absorb infrared signals even when the user

is within 100 cm or 40 inches of the display,

step up signal strength when wearing black

or other dark clothes.

Hot key Sensor distance

Landscape/Portrait mode

ATTENTION

PowerSensor off

ATTENTION

PowerSensor off

Aboveillustrationsareforreferencepurposeonly,maynotreectthe

exact display of this model.

How to adjust settings

If PowerSensor is not operating correctly

inside or outside the default range, here’s how

to fine-tune detection:

• Press the PowerSensor hot key.

• You will find the adjustment bar.

• Adjust the PowerSensor detection

adjustment to Setting 4 and press OK.

• Test the new setup to see if PowerSensor

properly detects you in your current

position.

• PowerSensor function is designed to work

inLandscapemode(horizontalposition)

only. After PowerSensor turn on it, it will

automatically turn Off if the monitor

is used in Portrait mode (90 degree/

verticalposition);itwillautomaticallyturn

ON if monitor is returned to its default

Landscape position.

Note

A manually selected PowerSensor mode

will remain operational unless and until it is

readjusted or the default mode is recalled. If

youndthatthePowerSensorisexcessively

sensitive to nearby motion for some reason,

please adjust to a lower signal strength.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 241P6 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 241P6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info