Bedienungsanleitung Philips 243V7QDAB Full HD LCD-monitor (Seite 26 von 28) (Englisch)

706824

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

7. Troubleshooting & FAQs

• Restart your computer and repeat

step 2 and 3 to verify that your PC is

set at 1920 x 1080 @ 60 Hz.

• Shut down your computer,

disconnect your old monitor and

reconnect your Philips LCD monitor.

• Turn on your monitor and then turn

on your PC.

Q2: What is the recommended

refresh rate for LCD monitor?

Ans.: Recommended refresh rate in LCD

monitors is 60 Hz, In case of any

disturbance on screen, you can set

it up to 75 Hz to see if that removes

the disturbance.

Q3: What are the .inf and .icm files

on the user manual? How do I

install the drivers (.inf and .icm)?

Ans.: These are the driver files for your

monitor. Follow the instructions

in your user manual to install the

drivers. Your computer may ask you

for monitor drivers (.inf and .icm

files) or a driver disk when you first

install your monitor.

Q4: How do I adjust the resolution?

Ans.: Your video card/graphic driver

and monitor together determine

the available resolutions. You can

select the desired resolution under

Windows

Control Panel with the

"Display properties".

Q5: What if I get lost when I am

making monitor adjustments via

OSD?

Ans.: Simply press the OK button, then

select 'Reset' to recall all of the

original factory settings.

Q6: Is the LCD screen resistant to

scratches?

Ans.: In general it is recommended

that the panel surface is not

subjected to excessive shocks

and is protected from sharp or

blunt objects. When handling the

monitor, make sure that there is

no pressure or force applied to the

panel surface side. This may affect

your warranty conditions.

Q7: How should I clean the LCD

surface?

Ans.: For normal cleaning, use a clean,

soft cloth. For extensive cleaning,

please use isopropyl alcohol. Do

not use other solvents such as

ethyl alcohol, ethanol, acetone,

hexane, etc.

Q8: Can I change the color setting of

my monitor?

Ans.: Yes, you can change your color

setting through OSD control as the

following procedures,

• Press "OK" to show the OSD (On

Screen Display) menu

• Press "Down Arrow" to select the

option "Color" then press "OK" to

enter color setting, there are three

settings as below.

1. Color Temperature; The settings

are 6500K, 7500K and 9300K.

With settings in the 6500K range

the panel appears "warm, with

a red-white color tone", while a

9300K temperature yields "cool,

bluewhite toning".

2. sRGB; this is a standard setting

for ensuring correct exchange of

colors between different device

(e.g. digital cameras, monitors,

printers, scanners, etc)

3. User Define; the user can choose

his/her preference color setting

by adjusting red, green blue color.

Note

A measurement of the color of light

radiated by an object while it is being

heated. This measurement is expressed

in terms of absolute scale, (degrees

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 243V7QDAB Full HD LCD-monitor Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 243V7QDAB Full HD LCD-monitor

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info