Bedienungsanleitung Philips 24PFL3108H (Seite 17 von 47) (Englisch)

535713

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

EN 17

English

1. While you watch TV, press .

2. Select [Setup] > [TV settings] > [General

settings].

3. Select [Clock] > [Auto clock mode].

4. Select [Automatic], [Manual] or [Country

dependent], then press OK.

Change the time zone*

In countries with clock transmission data, you

can change the time zone if [Auto clock

mode] > [Automatic] or [Country

dependent] is selected.

1. In the [Clock] menu, select [Time zone].

2. Select your time zone, then press OK.

Set daylight saving time*

In countries with clock transmission data, you

can enable or disable daylight saving time if

[Auto clock mode] > [Automatic] or

[Country dependent] is selected.

1. In the [Clock] menu, select [Daylight

saving].

2. Select [Standard time] or [Daylight saving

time], then press OK.

Set the clock manually

You can set the date and time manually.

Before you start, set the clock mode to

[Manual].

1. In the [Clock] menu, select [Date] or

[Time], then press OK.

2. Set the time or date with the Navigation

buttons.

3. Select [Done], then press OK.

*Only available in certain countries.

Sleep timer

You can switch the TV to standby after a

specified time. During the countdown to the

specified time, you can switch off your TV

earlier or reset the sleep timer.

1. Press .

2. Select [Setup] > [TV settings] > [General

settings] > [Sleep timer].

3. Select the sleep timer duration.

The sleep timer can be set up for to 180

minutes. To switch off the sleep timer, set it

to zero minutes.

4. Press OK to activate the sleeptimer. After

the specified time, the TV switches to

standby.

Child lock

To protect children from unsuitable TV

programmes, you can lock the TV or block

age rated programmes.

Set or change the child lock code

1. Press .

2. Select [Setup] > [Channel settings] >

[Child lock].

3. Select [Set code] or [Change code].

4. Enter the code with the Numeric

buttons.

Tip: If you access the channels from the

channel list, you are prompted to enter your

lock code. If you forget your code, enter

‘8888’ to override any existing codes.

Lock or unlock channels

1. In the child lock menu, select [Channel

lock].

2. Enter the child lock code with the

Numeric buttons.

3. Select the channels to lock or unlock.

Restart the TV to activate the lock.

Note:

If you access the channels from the channel

list, you are prompted to enter your lock

code.

Parental rating

You can set your TV to display only

programmes with age ratings lower than

your child's age. This restriction only applies

to digital channels from broadcasters that

rate their programmes according to age.

1. Press .

2. Select [Setup] > [Channel settings].

3. Select [Child lock] > [Parental rating].

You are prompted to enter the child lock

code.

4. Enter the child lock code with the

Numeric buttons.

5. Select an age rating, then press OK.

All programmes above the selected age

rating are blocked.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 24PFL3108H Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 24PFL3108H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info