Bedienungsanleitung Philips 25PT4458 (Seite 7 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Norwegisch)

44441

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Remote control keys

** VCR key

The remote control lets you control the main functions of the VCR.

Press and hold down the VCR key located on the side of the remote control, then press one of the keys to access

the VCR functions: b %∫HîÏÈ¬P @#·¢ÊÆ09

Safety Information

• Plug the TV into a 220V – 240V AC, 50 Hz supply.

• Disconnect mains plug when :

– the red light below the TV screen is flashing continuously.

– a bright white line is displayed across the screen.

– there is a lightning storm.

– the set is left unattended for a prolonged period of time.

• Cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth.

• No naked flame sources, such as lighted candles,should be placed on top of the TV or in the vicinity.

• Do not place your TV set under direct sunlight or heat.

• Do not cover or block the TV as it could lead to overheating.

• Leave at least 5 cm around each side of TV set to allow for proper ventilation.

• Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.

• Battery Usage CAUTION – To prevent battery leakage that may result in bodily injury, property damage, or damage to the

unit:

– Install all batteries correctly, with + and – aligned as marked on the unit.

– Do not mix batteries (old and new or carbon and alkaline, etc.).

– Remove batteries when the unit is not used for a long time.

Useful Tips

• Do not leave your set on standby mode for a prolonged period of time. Switch off set to allow it to be

demagnetised.A demagnetised set supports good picture quality.

• Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may occur.

• Never attempt to repair a defective TV yourself.Always consult a skilled service personnel.

& Screen information /permanent no.

To display / clear the program number, name (if it

exists), time, audio mode and time remaining for the

sleep feature. Press the key for 5 seconds to activate

permanent display of the number.This key is also

used to exit from the menu.

é Surround Sound

To activate / deactivate the surround sound effect.

In stereo, this gives the impression that the

speakers are further apart. For models equipped

with Virtual Dolby Surround*, you can experience

Dolby Surround Pro Logic sound effects. In mono, a

stereo spatial effect is simulated.

“ VCR key **

‘ Pre-set sound

Used to access a series of stored settings: Speech,

Music,Theatre and return to Personal.

( Menu

To call up or exit the menus.

§ Cursor / Format

These 4 keys are used to navigate through the

menus.The îÏ keys are used to enlarge or

compress the picture vertically.

è Volume

To adjust the sound level

! Mute

To mute or restore the sound.

ç Number keys

Direct access to the programmes. For a 2 digit

program, enter the 2nd digit before the dash

disappears.

à Selection of EXT socket

Press several times to select EXT1, EXT2, S-VHS

and AV.

Radio / TV mode

To switch the TV set to radio or TV mode (for

versions equipped with radio).

# Standby

Lets you place the TV set on standby.To turn on the

TV, press P @@, b, 0 to 9 (or Â).

$ Teletext keys (p. 8), VCR keys (p.11) and list of

radio stations ı (p. 5)

% Sleep

To select an automatic standby after a preset time

(from 0 to 240 minutes).

& 16:9 modes (p. 9)

( Pre-set image

Used to access a series of stored settings: Rich,

Natural, Soft,Multimedia and return to Personal.

) Teletext keys (p.8)

~ Program selection

To access the next or previous programme.The

number, (name) and sound mode are displayed for a

few moments.

+ Teletext keys (p.8)

or VCR keys ** (p.11)

, Sound mode

Used to force programmes in Stereo to Mono or,

for bilingual programs, to choose between Dual I or

Dual II. For TV sets equipped for Nicam reception,

depending on the programmes, you can force the

Stereo Nicam sound to Mono or select between

Nicam Dual I, Nicam Dual II and Mono.

Mono

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 25PT4458 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 25PT4458

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info