Bedienungsanleitung Philips 26HFL4373D (Seite 24 von 47) (Englisch)

476604

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

PrimeSuite xxHFL4373D/10 Page 24

[Download Program]

Set selected Download Program as source for

clock time.

Time Offset]

Offset time added to the downloaded clock time:

[Slider]: -12 to 12 hr

[Buzzer Volume]

Audio Clock Time Alarm (buzzer):

[Set]: Off, On

[Daylight saving]

Set the Daylight saving options:

[Set]: Off, On

[Feature settings]

[Multi RC]

This function allows that up to four televisions can

be installed in a room whereas every TV will listen

to its own RC. Once the TV is set, also every RC

can be set to remember its connected TV:

[Off] This function is not used; all TVs will

listen to a ‘blue’ RC.

[Blue] The TV will listen to a ‘blue’ RC.

Press and hold both the menu and blue

button on the RC for more than two

seconds.

[Green] The TV will listen to a ‘green’ RC.

Press and hold both the menu and green

button on the RC for more than two

seconds.

[Yellow] The TV will listen to a ‘yellow’ RC.

Press and hold both the menu and yellow

button on the RC for more than two

seconds.

[Red] The TV will listen to a ‘red’ RC.

Press and hold both the menu and red

button on the RC for more than two

seconds.

[MyChoice]

With MyChoice it is possible to activate two

channel rings: R0 when MyChoice PIN is valid,

and R1 if not.

[Off]: Single channel map as configured

during channel installation.

[On] Channel ring R0 to be available to

guest in case of valid PIN entered; R1 if

not.

[ThemeTV]

With ThemeTV it is possible to activate a

customizable UI to select upto 15 different themes

that contains Channle references. ThemeTV can

be presented on the display by means of pressing

the ThemeTV button on the RC, or automatically

after starting up the TV:

[On]: Show ThemeTV on the display after

pressing the ThemeTV button on the

RC.

[Off] ThemeTV disabled.

[Startup] Show ThemeTV on startup and able

to showd ThemeTV by pressing the

TTV button on the RC.

[VSecure]

VSecure is the hospitality content scrambling

method used by the Philips Hospitality TVs. With

its internal VSecure Authorization key a VSecure

Unprotect key can be generated. If this VSecure

Unprotect key is stored in the TV, the TV is able

to descramble protected content. Loading the

VSecure Unprotect key can be done by USB

memory device or via DVB RF:

[Mode]

[Stand alone]:

The VSecure Unprotect key is to be

stored once via USB and will remain

available until manual erasing it.

[Connected]:

The VSecure Unprotect key is to be

send via serialXpress RF and will

remain valid until power down or

receiving a successive VSecure

Unprotect key.

[RF Static]:

The VSecure Unprotect key is to be

stored via RF and will remain valid

until manual erasing it or receiving a

successive VSecure Unprotect key.

[Load key to USB]

[Action] Place a USB memory device in the

USB side I/O.

Press ‘>’ or ‘OK’ to copy the VSecure

Authorization key to the USB memory

device

[Load key to TV]

[Action] Place a USB memory device with a

valid VSecure Unprotect key in the

USB side I/O.

Press ‘>’ or ‘OK’ to copy the VSecure

Unprotect key to the USB memory

device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 26HFL4373D Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info