706172
3
Zoom out
Zoom in
Vorherige Seite
1/61
Nächste Seite
EN 3
English
1 Get started
TV tour
High Definition TV
If your TV is equipped with a High Definition
(HD) display, you can watch HD video in
the following ways and more:
a Blu-ray disc player, connected with an
HDMI cable, playing a Blu-ray disc
an upscaling DVD player, connected
with an HDMI cable, playing a DVD
disc
an over-the-air HD broadcaster
(DVB-T or DVB-T2 MPEG4)
a digital HD receiver, connected with
an HDMI cable, playing HD content
from a cable or satellite operator
an HD game console, connected with
an HDMI cable, playing an HD game
Smart TV
You can make your TV the centre of your
digital life with the Smart TV* suite of
applications:
If you connect your TV to the home
network, you can share movies, pictures,
and music from a computer or media
server on your home network.*
If you connect your TV to the Internet,
you can enjoy a wealth of streaming
movies, pictures, music and much more
with Youtube Leanback* and other
Smart TV* applications.
Add a new dimension to your calls and
contact your friends and relatives on
the big screen. You can make video
calls on your TV with a Philips HD
Media box and a Philips TV video
camera (both sold separately). Enjoy
HD video and excellent sound quality
from the comfort of your sofa and start
calling now!*
*Available on certain models only.
Media playback
If you connect your TV to a USB storage
device, you can enjoy your movies, music
and pictures on a wide screen TV with
excellent sound.
Programme guides
You can find out what's on and what's
coming up with the now and next EPG
(Electronic Programme guide) or eight day
EPG.
EasyLink
If you connect your TV to HDMI-CEC
(Consumer Electronic Control) enabled
devices, such as a Blu-ray player or home
theatre, you can control them at the same
time with one remote control. Simply switch
on EasyLink after connection.
Intuitive menus
With the TV's intuitive menus, you can easily
access the channel or media file that you
want or tweak the TV settings to suit your
needs.
EN 4
TV controls
Rear controls
For PFL38x7, PFL35x7, PFL33x7,
42PFL32x7, 32PFL32x7, PFL31x7 and
PFL30x7:
1. (Standby): Switch the TV on or off.
2. CH +/- (Channel +/-): Switch to the next
or previous channel.
3. (Source): Access a connected device.
4. +/- (Volume +/-): Increase or
decrease volume.
For 26PFL32x7 and 22PFL32x7:
1. +/- (Volume +/-): Increase or
decrease volume.
2. CH (Channel ): Switch to the
next or previous channel.
3. No function.
4. (Source): Access a connected device.
5. (Standby): Switch the TV on or off.
Sensors
For PFL32x7 and PFL38x7 - 22 to 50 inch
TVs:
For PFL35x7 - 19 to 24 inch TVs:
1. Remote control sensor
Point the remote control at the sensor.
Make sure that the line-of-sight between the
remote control and the TV is not blocked by
furniture or other objects.
EN 8
Screen care
Risk of damage to the TV screen!
Never touch, push, rub or strike the
screen with any object.
Unplug the TV before cleaning.
Clean the TV and frame with a soft
damp cloth. Never use substances such
as alcohol, chemicals or household
cleaners on the TV.
To avoid deformations and colour
fading, wipe off water drops as soon as
possible.
Avoid stationary images as much as
possible. Stationary images are images
that remain onscreen for extended
periods of time. Stationary images
include onscreen menus, black bars,
time displays, etc. If you must use
stationary images, reduce screen
contrast and brightness to avoid screen
damage.
Lock the TV
Your TV is equipped with a Kensington
security slot at the base of the TV. To secure
the TV, purchase a Kensington anti-theft lock
(sold separately).
Notice
2012 © TP Vision Netherlands B.V. All rights
reserved. Specifications are subject to change
without notice. Trademarks are the property
of Koninklijke Philips Electronics N.V or their
respective owners. TP Vision Netherlands
B.V. reserves the right to change products at
any time without being obliged to adjust
earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other
than those specified herein, confirmation of
their validity and suitability must be obtained.
TP Vision Netherlands B.V. warrants that the
material itself does not infringe any United
States patents. No further warranty is
expressed or implied.
TP Vision Netherlands B.V. cannot be held
responsible neither for any errors in the
content of this document nor for any
problems as a result of the content in this
document. Errors reported to Philips will be
adapted and published on the Philips
support website as soon as possible.
Terms of warranty
Risk of injury, damage to TV or void of
warranty! Never attempt to repair the
TV yourself.
Use the TV and accessories only as
intended by the manufacturer.
The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Care for
service or repairs.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not
recommended or authorised in this
manual shall void the warranty.
EN 12
2 Use your TV
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch on the TV.
If the TV is in standby, press on the
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press CH +/- on the TV.
Switch TV to standby
Press on the remote control.
The remote control sensor on the TV
switches to red.
Switch off the TV
Press on the TV.
The TV switches off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings. The settings are enabled
by default, so that if there is no user
interaction (such as pressing a remote
control button or a control on the rear
panel) for four hours, the TV will
automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to make a
selection, then press OK.
Adjust TV volume
Increase or decrease the TV volume
Press +/- on the remote control.
Press +/- on the side of the TV.
Mute or unmute the TV volume
Press on the remote control to
mute the volume.
Press again to restore the volume.
Adjust headphone volume
1. Press > [Setup] > [TV settings] >
[Sound].
2. Select [Headphone volume], then press
OK.
EN 13
English
Switch TV channels
Press CH +/- on the remote control or
TV.
Press the Numeric buttons to enter a
channel number.
Manage favourites
You can view all channels or only a list of
your favourite channels so that you can find
them easily.
Press LIST to access the channel list.
Create a list of your favourite channels
1. Press LIST.
2. Select the channel to mark as a favourite,
then press OPTIONS.
3. Select [Mark as favourite], then press OK.
The selected channel is marked.
To deselect a channel, select [Unmark as
favourite], and then press OK.
Select a channel list
1. Press LIST, then press OPTIONS.
2. Select [Select list] > [Favourite] to
display channels in the favourite list or [All]
to display all channels.
3. Press OK to confirm.
Manage channel lists
After the channels have been installed, you
can manage them:
Rename channels
Reorder channels
Listen to digital radio
Rename channels
You can rename channels. The name
appears when the channels are selected.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Select the channel to rename, then press
OPTIONS.
3. Select [Rename], then press OK.
4. Press the Navigation buttons to select
each character, then press OK.
Press OK in the entry screen to enable
the Onscreen Keyboard, or
Press [ABC] or [abc] to select an
uppercase or lowercase letter.
5. Once complete, select [Done], then press
OK to confirm when prompted.
6. Press to exit.
Reorder channels
After the channels have been installed, you
can reorder the channel list.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Press OPTIONS.
3. Select [Reorder], then press OK.
4. Select the channel to reorder, then press
OK.
5. Press the Navigation buttons to move the
highlighted channel to another location, then
press OK.
6. Press OPTIONS.
7. Select [Done reordering], then press OK.
Listen to digital radio
If digital radio channels are available, you can
listen to them. They are installed
automatically when you install the TV
channels.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Press OPTIONS.
3. Select [Select list] > [Radio], then press
OK.
4. Select a radio channel, then press OK.
EN 14
Select a source
You can watch a connected device in one of
the following ways:
Add its icon to the Home menu for
easy access, then select it from the
Home menu.
Select from the Source menu.
Note: If you connect an HDMI-CEC
compliant device to the TV, it is
automatically added to the Home menu.
Add new device
1. Connect and switch on the device.
2. Press .
3. Select [Add new device], then press OK.
4. Follow the onscreen instructions.
If you are prompted to select the TV
connection, select the connector that
this device uses.
View from Home menu
After you have added the new device to the
Home menu, you can select its icon to start
using it.
1. Press .
2. Select the device icon from the Home
menu.
3. Press OK to confirm.
View from Source menu
You can also press SOURCE to display
a list of connector names. Select the
connector that connects the device to the
TV.
1. Press SOURCE.
2. Press the Navigation buttons to select a
connector in the list.
3. Press OK to confirm.
Use smart settings
Your TV comes with smart picture and
sound settings. You can apply these settings
or customise them.
Select your preferred picture setting
1. While you watch TV, press ADJUST.
2. Select [Smart picture].
3. Select an option, then press OK:
[Personal]: Apply your personalised
picture settings.
[Vivid]: Rich and dynamic settings, ideal
for daytime viewing.
[Natural]: Natural picture settings.
[Cinema]: Ideal settings for movies.
[Game]: Ideal settings for games.
[Energy saving]: Settings that conserve
the most energy.
[Standard]: Default settings that suit
most environments and types of video.
[Photo]: Ideal settings for photos.
[Custom]: Customise and store your
own picture settings.
Select your preferred sound setting
1. While you watch TV, press ADJUST.
2. Select [Smart sound].
3. Select an option, then press OK:
[Personal]: Apply your personalised
sound setting.
[Standard]: Settings that suit most
environments and types of audio.
[NEWS]: Ideal settings for spoken
audio, such as the news.
[Cinema]: Ideal settings for movies.
[Game]: Ideal settings for games.
[DRAMA]: Ideal settings for drama
programmes.
[SPORTS]: Ideal settings for sports.
EN 17
English
Play options
Watch video
Press the Navigation buttons to select a
video file, then press OK.
Press to pause.
Press to stop.
Press / to search backward or
forward.
Press to exit the content browser.
Video playback options
While you play video, press OPTIONS
to access the following video options:
[Subtitles]: Select the available subtitles
settings.
[Audio language]: Select the available
audio language.
[Repeat]: Repeat a video, track or
album.
[Show info]: Display the file name.
[Eco settings]: Select energy-saving
modes.
Listen to music
Press the Navigation buttons to select a
music track, then press OK.
Press to pause.
Press to stop.
Press / to search backward or
forward within a music track.
Press to exit content browser.
Music playback options
Press OPTIONS to access or exit the
following music options:
[Repeat]: Repeat a track or an album.
[Play once]: Play the track once.
[Shuffle on] / [Shuffle off]: Enable or
disable random play of tracks.
[Show info]: Display the file name.
[Eco settings]: Select energy-saving
modes.
View pictures
Press the Navigation buttons to select a
picture, then press to start the slideshow.
Press to pause.
Press to stop.
Press Navigation buttons to search for
a picture.
Press to exit content browser.
Picture slideshow options
Press OPTIONS to access or exit the
following picture options:
[Slideshow transitions]: Select the
transition from one picture to the next.
[Slideshow frequency]: Select the
display time for each picture in the
slideshow.
[Repeat] / [Play once]: View slideshow
once or repeatedly.
[Shuffle off] / [Shuffle on]: Enable or
disable random display of pictures in
the slideshow.
[Rotate image]: Rotate the picture.
[Show info]: Display the picture
information.
[Set as Scenea]: Load the selected
picture as the TV wallpaper. See Use
more of your TV > View Scenea (Page
24).
EN 18
Browse Smart TV
What you can do
*Available on certain models only.
With Internet Applications (Apps), specially
adapted Internet websites for your TV, you
can watch videos online.
Note:
Smart TV services and apps vary from
country to country.
Smart TV displays one page at a time, in
full screen.
Certain websites may not display
completely. Functions that require
plug-ins may be unavailable.
TP Vision Netherlands B.V. bears no
responsibility regarding the content and
the quality of the content provided by
the content service providers.
What you need
1. On your home network, connect the TV
to the Internet.
2. On your home network, connect a router
with a high-speed connection to the Internet.
3. Switch on the router.
4. Install the network. See Connect your TV
> Network and the Internet.
Access Smart TV Applications
(Apps)
If your TV is connected to the Internet
through your home network, you can watch
YouTube videos and view media files from
your home network.
YouTube Leanback
1. Press .
2. Select [YouTube], then press OK.
3. Follow the onscreen instructions to watch
videos.
4. Press to exit.
Browse network
1. Press .
2. Select [Browse network], then press OK.
3. Select the network to connect.
4. Press the Navigation buttons to select a
file, then press OK.
5. Press to exit.
EN 19
English
3 Use more of
your TV
Play games
Add a game console
You can play games consoles projected on a
wide screen TV with excellent sound. Before
you start, connect your game console to this
TV. See Connect your TV > Connect
devices > Game console (Page 39).
For easy access, add the game console to
the Home menu.
1. Press .
2. Select [Add your devices] > [Game
console], then press OK.
3. Follow the onscreen instructions to add
the game console.
Game setting
The Game option in the Smart picture
settings optimises the TV display for gaming
without picture lag.
If you add the game console to the
Home menu as [Game console], the
TV switches to the game setting
automatically.
If your game console is automatically
added to the Home menu as a Blu-ray
disc player or DVD player, set the
[Smart picture] setting to [Game]
before you start playing.
Switch to Game setting
1. Press ADJUST.
2. Select [Smart picture] > [Game], then
press OK. The TV is ready for gaming.
Note: When your gaming session ends,
switch back to your usual Smart Picture
setting.
View Text
Select a page
While you watch channels that broadcast
text, you can view the text.
1. Select a channel that broadcasts text, then
press TEXT.
2. Select a page in one of the following ways:
Enter the page number with the
Numeric buttons.
Press CH + / CH - to view the next or
previous page.
Press the Colour buttons to select a
colour coded item.
3. Press to exit.
Text options
1. While you view text, press OPTIONS.
2. Select an option:
[Freeze page] / [Unfreeze page]:
Freeze or unfreeze the current page.
[Dual screen] / [Full screen]: Enable or
disable dual screen text. Dual screen
displays both the current channel and
the text broadcast on two halves of the
TV screen.
[T.O.P. overview]: Table Of Pages
(T.O.P.) text broadcasts allow you to
jump from one subject to another
without entering page numbers.
[Enlarge] / [Normal view]: Zoom in on
the page. Press the Navigation buttons
to move around the enlarged view.
[Reveal]: Hide or reveal hidden
information on a page, such as solutions
to riddles or puzzles.
[Cycle subpages]: If subpages are
available, each is shown automatically.
[Language]: Switch to a different
language group to correctly display
different character sets.
3. Press OPTIONS to exit.
EN 24
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.
Switch on Pixel Plus Link
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [Pixel Plus Link] > [On], then press
OK.
Maximise video display
Some subtitles create a separate subtitle bar
under the video that limits the video display
area. To maximise the video display area,
you can switch on auto subtitle shift. The
subtitles are then displayed over the video
image.
Switch on auto subtitle shift
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift].
3. Select [On], then press OK to activate.
Note: Make sure that the picture format of
the TV is set to [Auto format] or [Movie
expand 16:9].
Switch off connecting device
You can set the TV to switch off connecting
HDMI-CEC compliant devices if they are not
the active source. The TV switches the
connecting device to standby after 10
minutes of inactivity.
1. Press .
2. Select [Setup] > [TV settings] >
[EasyLink].
3. Select [Auto switch off devices] > [On],
then press OK to activate.
View Scenea
What you can do
With Scenea, you can display a picture as the
wallpaper on your TV. Display the default
picture or load your own picture as the
wallpaper.
The wallpaper is displayed for 240 minutes
or for the duration of the sleeptimer.
Switch on
1. Press .
2. Select [Scenea], then press OK.
The default picture is displayed.
Note: The wallpaper is displayed for 240
minutes or for the duration of the sleeptimer.
For information about the sleeptimer, see
Use more of your TV > Set locks and
timers > Sleeptimer (Page 21).
Load TV wallpaper
You can also load your own picture as the
wallpaper.
Note: When you load a new picture, it
overrides the existing picture.
1. Connect the USB storage device to the
TV.
2. Press .
3. Select [Browse USB], then press OK.
4. Select a picture, then press OPTIONS.
5. Select [Set as Scenea], then press OK.
6. Press any button to exit Scenea.
EN 25
English
4 Set up your TV
Picture and sound
Settings assistant
You can select picture and sound settings
with the help of the settings assistant, which
demonstrates the effect of your chosen
setting immediately.
1. While you watch TV, press .
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Continue], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
More picture settings
You can change the settings in the Picture
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Picture],
then press OK.
3. Select a setting to adjust, then press OK.
[Smart picture]: Access predefined
smart picture settings.
[Reset]: Reset to default factory
settings.
[Backlight]: Change the brightness of
the TV to match the lighting condition.
[Video contrast]: Change the intensity
of the bright areas, keeping dark areas
unchanged.
[Brightness]: Change the intensity and
details of the dark areas.
[Colour]: Change colour saturation.
[Sharpness]: Change sharpness.
[Noise reduction]: Filter and reduce
noise.
[Tint]: Change the colour balance.
[Custom tint]: Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
[Digital Crystal Clear]: Control
advanced settings to fine-tune each
pixel to match surrounding pixels.
Produce a brilliant, high definition image.
- [Advance sharpness]: Enable superior
sharpness, especially on lines and
contours in the picture
- [Dynamic contrast]: Set the level at
which the TV automatically enhances
details in the dark, middle and light
areas of the picture.
- [Dynamic backlight]: Reduce power
consumption by dimming the TV
backlight to match the room lighting
conditions.
- [MPEG artifact reduction]: Smooth
the digital transitions in the picture.
- [Colour enhancement]: Change the
colours to be more vivid and improve
the resolution of details in bright
colours.
- [Gamma]: Non-linear setting for
picture luminance and contrast.
[PC mode]: When a PC is connected
through HDMI, change the picture
format to [Unscaled] to display
maximum detail.
[Picture format]: Change the picture
format.
[Screen edges]: Change the picture
size.
[Picture shift]: Move the position of the
picture. You cannot select this setting if
the selected picture format is [4:3],
[Auto fill], [Auto zoom] or [Wide
screen].
EN 26
More sound settings
You can change the settings in the Sound
menu.
1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to change, then press OK:
[Smart sound]: Access predefined
smart sound settings.
[Reset]: Reset to factory default
settings.
[Clear Sound]: Enhance the sound
quality.
[Bass]: Change the bass level.
[Treble]: Change the treble level.
[Surround]: Switch on spatial sound.
[Auto volume levelling]: Automatically
reduce sudden volume changes, for
example when switching channels.
[Headphone volume]: Change
headphone volume.
[Balance]: Change the balance of the
left and right speakers.
[Audio out delay]: Automatically sync
the image on the TV to the audio from
a connected home theatre.
[Audio out offset]: Change the setting
for audio output delay. You cannot
select this setting if [Audio out delay] is
not switched on.
[Digital output format]: Select audio
output through the digital audio
connector. Select [PCM] to convert
non-PCM audio or [Multichannel] to
output to home theatre.
[Digital output level]: Set the sampling
rate for PCM audio.
[Normal] - No loss in intensity or signal
strength; [Low] - Certain amount of
loss in intensity or signal strength.
Select audio format
If a digital TV channel broadcaster streams
audio in several formats, you can select an
audio format.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Language].
3. Select a setting, then press OK:
[Preferred audio format]: Receive
standard audio format (MPEG) or
advanced audio formats (AAC, EAC-3
or AC-3 if available).
[Mono/Stereo]: If stereo broadcasting is
available, select mono or stereo audio.
4. Press to exit.
Reset picture and sound
You can restore the default picture and
sound settings, while the channel installation
settings remain the same.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] > [Factory
settings], then press OK.
All TV settings (except for channel settings)
are reset to the default factory settings..
Channel settings
Automatic install
When the TV was switched on for the first
time, a full installation of channels was
performed. To change your language,
country and reinstall all available TV channels,
you can run this full installation again.
Start installation
1. Press .
2. Select [Setup] > [Search for channels] >
[Reinstall channels], then press OK.
The Country menu is displayed.
3. Select your country, then press OK.
4. Select your network, then press OK:
[Antenna]: Access free-to-air antenna
or digital DVB-T channels.
[Cable]: Access cable or digital DVB-C
channels.
EN 27
English
5. Follow the onscreen instructions to select
other options, if any.
The start menu for channel search is
displayed.
6. Start channel search:
If your channel service provider
instructs you to change settings, select
[Settings], then press OK. Follow the
service provider's instructions to
complete the installation.
Otherwise, select [Start], then press
OK.
7. Once the channel search is complete,
select [Finish], then press OK.
Tip: Press LIST to see the channel list.
Note: When digital TV channels are found,
the list of installed channels may display
empty channel numbers. You can rename,
reorder or uninstall these channels.
Install analogue channels
You can search and store analogue TV
channels one by one.
Step 1: Select your system
Note: Skip this step if your system settings
are correct.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Analogue: Manual antenna
installation] > [System], then press OK.
4. Select the system for your country or
region, then press OK.
Step 2: Search and store new TV channels
1. In the [Analogue: Manual antenna
installation] menu, select [Find channel],
then press OK.
2. Find the channel:
If you know the channel frequency,
enter it with the Navigation buttons or
Numeric buttons.
If you do not know the channel
frequency, search for the next
frequency that has a strong signal.
Select [Search], and then press OK.
3. After you have found the correct channel,
select [Done], then press OK.
4. Select [Store as new channel], then press
OK to store the new TV channel.
Note: If the reception is poor, reposition
your antenna and repeat the procedure.
Install digital channels
If you know the channel frequency of the
channels you want to install, you can search
and store digital channels one-by-one. For
best results, contact the service provider.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Digital: Reception test] > [Find
channel], then press OK.
4. Press the Numeric buttons to enter the
channel frequency.
5. Select [Search], then press OK.
6. When the channel is found, select [Store],
then press OK.
7. Press to exit.
Note: If your cable provider does not
provide you with a specific symbol rate value
for DVB-C channels, select [Automatic] in
[Symbol rate mode].
Fine-tune analogue channels
If the reception of an analogue TV channel is
poor, you can fine-tune the TV channel.
1. Press .
2. Select [Setup] > [Channel settings] >
[Channel installation].
3. Select [Analogue: Manual antenna
installation] > [Fine tune], and then press
OK.
4. Press or to fine-tune the channel.
5. When you have selected the correct
channel frequency, select [Done], and then
press OK.
6. Select an option, then press OK.
[Store current channel]: Store the
channel as the current channel number.
[Store as new channel]: Store the
channel as a new channel number.
EN 28
Update channel list
When the TV was switched on for the first
time, a full installation of channels was
performed.
By default, when there are changes to these
channel lists, the TV updates them
automatically. You can also switch off the
automatic update or manually update the
channels.
Note: If you are prompted to enter a code,
enter '8888'.
Automatic update
To add or remove digital channels
automatically, leave the TV in standby mode.
The TV updates channels and stores new
channels everyday. Empty channels are
removed from the channel list.
Switch off the channel update message
If a channel update is performed, a message
is displayed at startup. You can switch off this
message.
1. Press .
2. Select [Setup] > [Channel settings] or
[Satellite settings].
3. Select [Channel installation] > [Channel
update message].
4. Select [Off], then press OK.
To switch off automatic updates
In the [Channel installation] menu, select
[Automatic channel update] > [Off].
Update channels manually
1. Press .
2. Select [Setup] > [Search for channels] >
[Update channels], then press OK.
3. Follow the onscreen instructions to
update the channels.
Satellite settings
What you can do
View satellite channels
Note:
Satellite signal is available on certain
models only.
[Search for satellite] is only available if
the TV supports DVB-S.
To receive satellite channels, connect a
satellite receiver to the SAT connector
on your TV.
LNBs
This TV can receive signals from 4 different
low noise block-down converters (LNBs).
An LNB is mounted at the end pole of the
dish antenna and captures signals from a
satellite.
Install satellite channels
Install satellite channels
1. While you watch TV, press .
2. Select [Setup] > [Search for satellite] >
[Reinstall channels].
3. Follow the onscreen instructions to
complete the installation.
4. Once complete, select [Finish], then press
OK.
Select connection type
While you install satellite channels, you need
to set the connection type. The number of
LNBs on your dish antenna determines the
number of satellite channels you can install.
1. After you select [Reinstall channels],
select [Settings] and then press OK.
2. Select [Connection type].
3. Select a setting, then press OK.
[OneLNB]: Select if you have only one
LNB.
[DiSeqC Mini (2 LNBs)]: Select if you
have 2 LNBs.
[DiSeqC 1.0 (3-4 LNBs)]: Select for 3
or 4 LNBs.
EN 30
Subtitles on digital channels
1. While you watch a digital TV channel,
press OPTIONS.
2. Select [Subtitles], then press OK.
3. Select [Subtitles off], [Subtitles on] or
[On during mute], then press OK.
If you select [On during mute], subtitles are
displayed only when you press to mute
the sound.
Note: If an MHEG application is activated,
subtitles are not displayed.
Subtitle language
For certain digital channels, you can change
the subtitle language.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] or
[Satellite settings] > [Language].
3. Select [Primary subtitle language] or
[Secondary subtitle language] for the
preferred language.
4. Press OK to confirm.
Tip: Press OPTIONS > [Subtitle
language] to change the subtitle language for
a specific channel.
Universal access settings
Switch on
Some digital TV broadcasters provide special
audio and subtitle features for people who
are hearing or visually impaired. You can
switch these features on or off.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Universal access] > [On] or [Off]
then press OK.
Hearing impaired access
Tip: To make sure that a hearing impaired
audio language is available, press
OPTIONS, then select [Audio language].
Languages with an ear icon support hearing
impaired audio.
To switch on hearing impaired audio and
subtitles
1. While you watch TV, press OPTIONS.
2. Select [Universal access] > [Hearing
impaired].
3. Press a button to select an option:
Red: Switch off hearing impaired
features.
Green: Switch on hearing impaired
audio and subtitles.
4. Press to exit.
Visually impaired access
Tip: To make sure that a visually impaired
audio language is available, press
OPTIONS, then select [Audio language].
Languages with an eye icon support visually
impaired audio.
To switch on visually impaired audio
1. While you watch TV, press OPTIONS.
2. Select [Universal access].
3. Press the Green button to select [Visually
impaired].
4. Press a button to select an option:
Red button - [Off]: Switch off visually
impaired audio.
Green button - [On]: Switch on visually
impaired audio.
5. Press to exit.
Note: If the EasyLink remote control is
switched on, you cannot select the Green
button. To switch off EasyLink, see Use
more of your TV > Use EasyLink > What
you need (Page 22).
Select audio from speakers or headphones
You can choose to hear the visually impaired
audio through the TV speakers, headphones
or both.
1. Press .
2. Select [Setup] > [Channel settings] >
[Languages] > [Visually impaired] >
[Speakers/ Headphones].
EN 31
English
3. Select a setting, then press OK.
[Speaker]: Hear visually impaired audio
from speakers only.
[Headphone]: Hear visually impaired
audio from headphones only.
[Speaker + headphone]: Hear visually
impaired audio from speakers as well as
headphones.
Change volume for visually impaired audio
1. Press .
2. Select [Setup] > [Channel settings] >
[Languages] > [Visually impaired] > [Mixed
volume].
2. Press the Navigation buttons to change
the volume, then press OK.
3. Press to exit.
Audio feedback for the visually impaired
When you press a button on the remote
control or TV, you can set the TV to play a
beep.
1. In the [Universal access] menu, press the
Blue button to select [Key beep].
2. Press the Green button to turn on audio
feedback or press the Red button to turn it
off.
3. Press to exit.
Enable audio effects
1. Press .
2. Select [Setup] > [Channel settings] >
[Languages] > [Visually impaired] > [Audio
effects].
3. Select a setting, then press OK.
[On]: Enable audio effects in the visually
impaired audio.
[Off]: Disable audio effects in the
visually impaired audio.
Choose type of speech
1. Press .
2. Select [Setup] > [Channel settings] >
[Languages] > [Visually impaired] >
[Speech].
3. Select a setting, then press OK.
[Descriptive]: Hear descriptive speech
in the visually impaired audio.
[Subtitles]: Hear subtitles in the visually
impaired audio.
Other settings
TV demo
You can start a demo to find out more
about the features on this TV.
Note: Demos are not supported on MHEG
channels.
1. While you watch TV, press .
2. Select [Setup] > [Watch demos], then
press OK.
3. Select a demo, then press OK.
4. Press to exit.
Location
To make sure that the correct TV settings
are applied, you can select where the TV is
used.
Shop or home mode
Select [Home] mode to access all TV
settings. In [Shop] mode, you can access only
limited settings.
1. While you watch TV, press .
2. Select [Setup] > [TV settings] >
[Preferences].
3. Select [Location] > [Home] or [Shop],
then press OK.
4. Restart the TV.
Placement
Before you position the TV, read all
safety precautions. See Get Started >
Important > Safety (Page 6).
Position the TV where light does not
shine directly on the screen.
The ideal viewing distance of this TV is
three times its diagonal screen size. For
example, if the diagonal screen size of
the TV is 81 cm / 32", the ideal viewing
distance is ~2.5 m / ~92" from the
front of the screen.
While seated, your eyes should be level
with the centre of the screen.
Stand mount or wall mount
You can apply the best settings for your TV
by selecting wall mount or stand mount.
1. In the [Preferences] menu, select [TV
position].
2. Select [On a TV stand] or [Wall
mounted], then press OK.
EN 36
TV receiver
Connect the satellite or digital TV receiver to the TV with an antenna cable. (SAT is available on
certain models only.)
Connect the satellite or digital TV receiver to the TV with an HDMI cable.
Connect the satellite or digital TV receiver to the TV with a SCART cable.
EN 37
English
Connect the satellite or digital TV receiver to the TV with a component video cable (Y Pb Pr) and
an audio L/R cable.
Connect the satellite or digital TV receiver to the TV with a composite cable (CVBS) and an audio
L/R cable.
CVBS AUDIO L/R
Video recorder
Connect the recorder to the TV with an antenna cable. (SAT is available on certain models only.)
EN 38
Connect the recorder to the TV with a SCART cable.
Connect the recorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
Connect the recorder to the TV with a composite cable (CVBS) and an audio L/R cable.
CVBS AUDIO L/R
EN 39
English
Game console
Connect the game console to the TV with an HDMI cable.
Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R
cable.
Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable.
CVBS AUDIO L/R
EN 40
Home theatre
Connect the home theatre to the TV with an HDMI cable and an optical cable.
Connect the home theatre to the TV with a SCART cable.
Connect the home theatre to the TV with a component video cable (Y Pb Pr) and an audio L/R
cable.
EN 41
English
Connect the home theatre to the TV with a composite cable (CVBS) and an audio L/R cable.
CVBS AUDIO L/R
Digital camera
NonPublish
Connect the digital camera to the TV with a USB cable. (For certain camera models only)
Digital camcorder
Connect the digital camcorder to the TV with an HDMI cable.
EN 42
Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R
cable.
Connect the digital camcorder to the TV with a composite cable (CVBS) and an audio L/R cable.
Connect more devices
USB hard drive
Connect the USB hard drive to the TV with a USB cable.
EN 43
English
Computer
Connect the computer to the TV with an HDMI cable.
Connect the computer to the TV with a DVI-HDMI cable and an audio cable.
Connect the computer to the TV with a VGA cable and an audio cable.
EN 46
Start wireless setup
1. Switch on your wireless network router.
2. Connect the Philips USB adapter PTA01
to a USB connector on the TV.
The wireless installation starts automatically.
3. Follow the onscreen instructions.
Tip: Keep the wireless USB adapter
connected to the TV.
WPS - Wi-Fi Protected Setup
1. If your router supports WPS (WiFi
Protected Setup), press the WPS button on
the router.
2. After 2 minutes, select [WPS] on the TV,
then press OK.
The TV connects to your network. This
takes about 2 minutes.
Most new wireless routers have the WPS
system and carry the WPS logo. The WPS
system uses WPS security encryption and
cannot be combined with devices on your
network that use the WEP (Wired
Equivalent Privacy) security encryption.
If you still need the WEP devices in your
network, install with [Scan] > [Custom].
Scan for routers
If you have several routers in your network,
you can select the network you need.
1. To select a specific network router, press
[Scan] on the first page of the installation.
The routers with WPS and the strongest
signal are shown first in the list on screen.
2. Select the router you need, then press
OK.
If you are connecting to a WPS router,
select [WPS] on the TV.
If you want to set the PIN code in your
router software to connect, select
[WPS pin] and note down the code.
To enter the encryption key manually,
select [Standard] and enter the key
when prompted.
Set secured connection with WPS
encryption
1. To set the secured connection with a PIN
code, select the [WPS pin] and press OK.
2. Write down the 8-digit PIN code shown
on TV and enter it in the router software on
your PC.
See the router manual for where to enter
the PIN code.
Set secured connection with WPA
encryption
If your router has WPA (WiFi Protected
Access) security, enter the pass phrase with
the remote control.
1. To enter the encryption key manually,
select [Standard] and press OK.
2. To access the onscreen keyboard, select
the text entry field, then press OK.
Set secured connection with WEP
encryption
If your router has WEP security, the TV asks
for the WEP encryption key in hexadecimal
numbers.
1. Locate the hexadecimal key in the router
software on your PC and make a note of of
the first key in the WEP keys list.
2. Enter the security key on the TV with the
remote control to connect to the router.
3. If prompted, agree to the End User
Licence Agreement.
EN 47
English
Common interface
What you can do
You can watch scrambled digital TV channels
with a Conditional Access Module (CAM).
After the CAM is inserted and subscription
fees are paid, you can watch the programme.
This TV supports CI as well as CI+. CI+
supports premium HD digital programmes
with a high level of copy protection.
Note: The applications, functions, content
and onscreen messages depend on the CAM
service provider.
What you need
Caution: To protect the CAM from damage,
insert the CAM as instructed.
Note: Refer to the documentation from
your service operator on how to insert a
smart card into the Conditional Access
Module.
1. Switch off the TV.
2. Follow the directions printed on the CAM
to insert the CAM into the Common
Interface slot at the side of the TV.
Push the CAM in as far as it will go.
3. Switch on the TV, then wait for the CAM
to be activated. This takes a few minutes.
To maintain access to encrypted digital TV
channels, leave the CAM in the slot.
Watch CAM services
1. After you insert and activate the CAM,
press OPTIONS.
2. Select [Common interface], then press
OK.
3. Select the CAM provider, then press OK.
EN 48
6 Troubleshooting
General issues
The TV does not switch on:
Disconnect the power cable from the
power outlet. Wait for one minute
then reconnect it.
Make sure that the power cable is
securely connected.
The TV does not respond to remote
control or front controls when switched
on:
The TV requires some time to start up.
During this time, the TV does not respond
to the remote control or front controls. This
is normal behaviour.
When you are turning the TV on, off or to
standby, you hear a creaking sound from
the TV chassis:
No action is required. The creaking sound is
due to the normal expansion and
contraction of the TV as it cools and warms
up. This does not affect performance.
When the TV is in standby, a startup splash
screen is displayed, then returns to standby
mode:
This is normal behaviour. When the TV is
disconnected and reconnected to the power
supply, the startup screen is displayed at the
next startup.
To switch on the TV from standby, press
on the remote control or press any key on
the TV.
The standby light on the TV blinks red:
Disconnect the power cable from the power
outlet. Wait until the TV cools down before
you reconnect the power cable. If the
blinking reoccurs, contact Philips Consumer
Care.
You forgot the 4-digit code to unlock the
channel blocking feature (child lock):
Enter ‘8888’.
The TV or Smart TV* menu is in the wrong
language:
Change the menu to your preferred
language.
For more information, see Set up your TV >
Language settings > Menu language (Page
29).
* Available on certain models only.
Subtitles are not visible when you play a
movie file from a USB storage device:
Subtitle files that are not hard-coded into a
video file (for example, *.srt, *.sub, *.idx) are
not supported.
You want to upgrade your TV software:
Visit www.philips.com/support and
download the latest software package for
your TV. Software installation instructions
and release notes indicating what's been
updated are also available at the site. Full
instructions on how to upgrade your TV
software are also available at Set up your TV
> Update software.
Channel issues
You want to install TV channels
See Set up your TV > Channel settings
(Page 26) for instructions on installing
analogue or digital channels. If you want to
install satellite TV channels, see Set up your
TV > Channel settings (Page 28).
No digital channels were found during the
installation:
See the technical specifications to make sure
that your TV supports DVB-T, DVB-C or
DVB-S in your country.
Make sure that all cables are properly
connected and that the correct
network is selected.
Previously installed channels do not appear
in the channel list:
Make sure that the correct channel list is
selected.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 26PFL3207H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips 26PFL3207H

Philips 26PFL3207H Bedienungsanleitung - Deutsch - 69 seiten

Philips 26PFL3207H Bedienungsanleitung - Holländisch - 65 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info