145487
9
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
9
Stereo
Dolby
Pro Logic
Dolby
3 Stereo
Hall
Surround
3D Surround
”Dolby” and the double-D symbol £ are trademarks of Dolby Laboratories Licensing
Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.
You have a direct access to the surround modes with the ) key
Stereo
The sound is reproduced on the left and right loudspeakers of the TV
set.
Dolby 3 Stereo (with stereo source)
The sound is distributed over the left, right and centre loudspeakers.
This mode is not recommended for mono transmissions (only the centre
channel will be used).
3D Surround (optimal with Dolby Surround source)
This mode enables you to experience the effect of Dolby Pro Logic
without the need of having rear speakers connected or activated.The
sound is reproduced on the left, right and centre loudspeakers giving
the impression of a rear surround effect.
Hall Surround (with mono or stereo source)
The sound is reproduced on the left, right and rear loudspeakers,
creating a "Hall Surround" ambient effect.This mode is recommended for
broadcasts that are not encoded in Dolby Surround, but where you wish
to have a rear surround effect.
This mode is only available when surround loudspeakers are connected to
the TV set.
Dolby Pro Logic * (with Dolby Surround sound source)
The left, right, centre and rear speakers reproduce the Dolby Pro Logic
sound.This mode is used when a film or programme has been recorded
or encoded in Dolby Surround sound.These films or programmes are
always indicated by the symbol : £
DOLBY SURROUND.
The DOLBY PRO LOGIC mode is only available when surround loudspeakers
are connected to the TV set.This mode is not recommended for mono
transmissions (only the centre channel will be used).
Description of the different surround modes
Surround modes
This menu allows you to select the different
surround modes.
& Press
H, select SOUND (J) and press L.
The SOUND menu appears.
é Select SURROUND MODE and press
L.The
menu appears :
Use the
IJ keys to select the relevant
surround mode : STEREO, DOLBY 3 STEREO,
3D SURROUND,HALL SURROUND and
DOLBY PROLOGIC. For each setting, the
active loudspeakers are displayed on screen.
Remar
k : the DOLBY PRO LOGIC and HALL
SURROUND modes are only availables if surround
loudspeakers are connected to the TV set..
To exit from the menus, press
R.
This TV set is also equipped with automatic
switching which will select the correct surround
mode, provided the specific signals are transmitted
with the programmes.This automatic format can
also be modified manually with the
) key.
• PICTURE
• SOUND
• FEATURES
• INSTALL
SOUND
• LEVEL
• EQUALIZER
SURROUND MODE
• DELTA VOLUME
• STORE
• AVL
• CORDLESS
• DELAY
3D SURROUND
HALL SURROUND
DOLBY PRO LOGIC
STEREO
DOLBY 3 STEREO
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 28pw6516 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info