145584
24
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
Contents
1
English
Your remote control 2
Preparation 3
Installation 4
Store TV channels 4
Select the menu language and country 4
Automatic installation 5
Manual installation 5
Give name 6
Reshuffle the programme list 6
Select favourite TV channels 6
Install TV setup 7-8
EasyLink features are based on the “one touch operation” approach.This
means that a sequence of actions are executed at the same time in both
the television and the video cassette recorder, provided both are fitted
with the EasyLink function and connected with the eurocable
supplied with your video recorder.
Installation
Operation
Use of the remote control 9-11
Use of the menus
Picture menu 12
Sound menu 12-15
Features menu 16
NEXTVIEW 17-21
Teletext 22-24
The keys on top of the TV 24
Connect peripheral equipment
Connecting and selecting equipment 25-28
Remote control functions for peripherals 29-30
Recording 31
Tips 32
Index 32
Glossary 33
2059.1 gb /05 15-05-2000 15:33 Pagina 1
2 Preparation
M h a
SMART
ACTIVE
CONTROLSMART
213
546
879
0
B
w
®
Ò
‡π
æ b
Ï
i
Mqa
SQ
TV
MOVIE SPORT CHILD NEWS OTHER
VCR DVD SAT
TUNER CD
OK
MENU
TAPE CDR
SMARTSMART
PICTURESOUND
¬V P
0
U
XP
fh
Uf
o
œ
®q
b cd
INSTANT
ZOOM
Preparation
Your remote control
Teletext p. 23
U time display/subpage selection
f solution to puzzles
display PDC/VPS code
h enlarge
P reduce image noise p. 11
Zoom p. 10
h zoom on/off
Smart Controls
M smart sound p. 11
h active control p. 10
a smart picture p. 11
Dual screen p. 10
b dual screen on
c no function
d still teletext picture
strobe
B switch to standby p. 9
i on screen info p. 9
0 previous programme p. 9
video recorder/DVD function p. 9
X bilingual choice/sound info p.11
TXT language group selection p. 22
EasyLink p. 11
®
INSTANT recording
q picture format p. 11
b teletext on/off p. 22
Ï main menu on/off p. 9
cursor to select
your choice p. 12
Installation p. 4
V volume up/down p. 9
¬ sound mute p. 9
P programme selection p. 9
Peripherals p. 29
w selection of
EXT1, EXT2, EXT3
or FRONT
TV, video recorder (VCR), DVD,
Satellite (SAT), TUNER, CD, TAPE or
cd-recordable (CDR) selection.
Colour keys
- select TV channels by theme p. 11
- direct teletext page or
subject selection p. 22
Audio- and Video equipment p. 29-30
O no function
S freeze the picture p. 9
hold teletext page p. 23
Q surround modes p. 9
æ
NEXTVIEW
on/off p. 9
OK activate your choice
2059.1 gb /05 15-05-2000 15:33 Pagina 2
& Place the TV on a solid surface.
For ventilation, leave at least 5 cm free all around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place any objects on top of the TV.
Avoid heat, direct sunlight and exposure to rain or water.
é Insert the aerial plug firmly into the aerial socket x at the back of the
TV. For best picture quality use the suppressor-aerial cable supplied.
Insert the mains plug in the wall socket having a mains voltage of 220V-240V.
To prevent damaging the mains (AC) cord which could cause a hazard, do not
place the TV on the cord.
Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R6-1.5V).
Press the TV key to be sure your remote control is in the TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with
your household waste. Please check on how to dispose of exhausted batteries
according to local regulations.
Note: this remote control functions with TVs which use the RC6 signalling standard.
( Switch the TV on : Press the power switch A on the front of your TV.
A green indicator on the front of the TV lights up and the screen comes on.
If the indicator is red, press the
-
P+ key on the remote control.
The green lamp blinks every time you press a key on the remote control.
When you switch on your set for the first time, the menu
LANGUAGE
automatically appears on the screen.The explanation appears in different languages
one at a time. Choose your own language and press the OK key on the remote
control.
Go on to page 4.
3Preparation
Preparation
CABLE
R6 / AA
+
-
B
w
æ b
SQ
VCR
MOVIE OTHERNEWSCHILDSPORT
TV DVD SAT
CDTUNER TAPE CDR
TV
2059.1 gb /05 15-05-2000 15:33 Pagina 3
4
Installation
Store TV channels
After the new or extra TV channels have been stored, the TV automatically transfers
those TV channels to the video recorder if it is equipped with the EasyLink function.
The message EasyLink : downloading ...... appears on the screen. The
programme list of the video recorder is now the same as the one of the TV. If the TV
is connected to a video recorder which supports the
NEXTVIEWLink function, the TV
also automatically transfers the language and country selections to the video
recorder.
First, select your language and country.
& Select Menu language and press the OK key.
é Select your language and press the OK key.
Use the cursor up/down to scroll through the list and to bring up other
languages which are not displayed on the screen at present.
Select Country and press the OK key.
Select the country where you are now located and press the OK key.
Use the cursor up/down to scroll through the list and bring up other
countries which are not displayed on the screen at present.
Select
Other when none of the countries applies.
You can now search for and store the TV channels in two different ways:
using automatic installation or manual installation (tuning-in channel by
channel).
Select your choice and press the OK key.
Select the menu language and country
Menu language
J INSTALLATION
MENU TITLE
United Kingdom
....
....
J Country
MENU TITLE
English
....
....
J Menu language
& Open the door of the remote control.
é Press U and f at the same time.
Installation
Select the
INSTALLATION
menu
& Use the cursor in the up/down, left/right directions to select a menu item.
é Press the OK key to activate.
Use the Ï key to return or to switch the menu off.
To use the menus
MENU TITLE
Subject 1
Subject 2
Subject 3
J Subject 4
Subject 5
Subject 6
J Subject 4 L M
o
œ
o
œ
213
546
879
0
i
¬V P
0
U
qP
f
h
ZOOM
INSTANT
213
546
B
w
æ b
Ï
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
SQ
MOVIE OTHERNEWSCHILDSPORT
OK
MENU
select menu item
return or switch
main menu off
activate
2059.1 gb /05 15-05-2000 15:33 Pagina 4
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual installation menu.
Selection mode is only present and lights up if the country selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
& Select the TV system
Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country or part of the
world where you are now located.
é Press the cursor down and enter the programme number with the digit keys.
Select Search
Press the cursor left/right.
The frequency or the channel number increases until a TV channel is found.
Direct selection of a TV channel
If you know the frequency, the C- or S-channel number, enter it directly with
the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
Fine tune
In case of poor reception, this can sometimes be improved by adjusting the
frequency with the cursor left/right.
( To store your TV channel, select Store and press the OK key.
Repeat steps
& to ( to store another TV channel.
§ To exit from the menu press the Ï key on the remote control.
In the Automatic installation menu select Start and press the OK key to start
the search. All TV channels are searched for and stored automatically.
If a cable system which broadcasts ACI (Automatic Channel Installation) or a
TV channel transmitting a teletext page with the frequencies and programme
names of all the TV channels which can be received, is detected, the search is
stopped and a programme list appears.
The programme list is automatically filled with all the programme numbers
and names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast
selection menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the cursor and press the OK key.
To exit from the menu press the Ï key on the remote control.
Go on to page 6.
5Installation
Manual installation
Automatic installation
Automatic installation
Start
Stop
TV is searching
One moment please ...
J Stop K
Automatic installation
Start
Stop
1 BBC1
2 BBC2
3 CNN
....
....
J Start K
Manual installation
(Selection mode)
System
Programme no.
Search
Fine tune
Store
J System K
2059.1 gb /05 15-05-2000 15:33 Pagina 5
6
Installation
Give name
It is possible to change the name stored in the memory or to assign a name
to a TV channel which has not yet been entered.A name with up to 5 letters
or numbers can be given to the programme numbers 0 to 99. For example
SUPER, BBC1,...
Between 99 and 0 you can also name any peripherals that are connected to a
euroconnector.
& Select Give name in the INSTALLATION menu and press the OK key.
é Select the programme number.
Press the OK key.
Select the character with the cursor up/down.
( Select the following position with the cursor right.
§ Select the required character with the cursor up/down.
è Press the OK key when finished.
! Press the Ï key to return to the INSTALLATION menu.
Space, numbers and other special characters are located between Z and A.
If you prefer you can change the order of the stored TV channels.This is
done by exchanging the position of the channels.
& Select Reshuffle in the INSTALLATION menu and press the OK key.
é Select the programme number you want to exchange.
Press the OK key.
Select the new number you want to exchange it with.
( Press the OK key.
Repeat the operation until all TV channels are in your preferred positions.
§ Press the Ï key to return to the INSTALLATION menu.
Reshuffle the programme list
After leaving the installation you can browse through the TV channels by
pressing the - P + key. Only those TV channels which are set as favourites will
be displayed. Non-favourite TV channels can still be selected with the digit
keys. By default all stored channels are set as favourites.
& Select Favourite programmes in the INSTALLATION menu and press
the OK key.
é Select the programme number you wish to set as a favourite.
Select Ye s or No with the cursor left/right.
Repeat for every TV channel you want to make a favourite or a
non-favourite TV channel.
( Press the Ï key to return to the INSTALLATION menu.
In order for
NEXTVIEW to function properly, the first TV channel from the favourite list
should also broadcast the correct local date and time.
Select Favourite TV channels
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
J Give name
Give name
EXT1
EXT2
EXT3
FRONT
0
1 BBC1
2 BBC2
3 ....
4 ....
5 ....
J 0
Reshuffle
0
1 CNN
2 BBC2
3 ....
4 ....
5 ....
J 1 CNN
Favourite programmes
EXT1
EXT2
EXT3
FRONT
0 ... No
1 ... Yes
2 ... No
3 .... No
4 .... Yes
5 ....
J 2 ... NO
2059.1 gb /05 15-05-2000 15:33 Pagina 6
7Installation
The Setup menu allows you to adjust initial settings, i.e. those which are not
related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV’s functions,
features, services and peripherals you may have connected.
& Use the cursor in the up/down, left/right directions to select the menu item.
é Use the OK key to activate.
Use the Ï key to return or switch menu off.
Digital sources
See Connect Peripheral Equipment, p. 26 for connecting digital equipment, for
example a DVD, a digital satellite tuner or a similar digital device.
Define Decoder/Descrambler programme numbers
If a decoder or a descrambler is connected, see p. 25, you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder
Off, EXT1 or EXT2.
Select
Off if you do not want the selected programme number being
activated as a decoder programme number.
Select
EXT2 when the decoder is connected to your EasyLink video recorder.
When selecting the decoder, the message EasyLink: downloading presets....
appears on the screen.
Picture tilt (if provided)
Select Picture tilt with the cursor up/down.
Keep the cursor left/right pressed to adjust the rotation of the picture.
Information line
When
On is selected, if the i key on the remote control is pressed or the
channel is changed, any programme name broadcast is displayed on the screen
next to the information about sound, picture format and DNR.
When
Off is selected, only sound, picture format and DNR information is
displayed after selecting a TV channel or after pressing the i key.
Factory settings
Select
Factory settings and press the OK key to restore the picture and
sound settings, predefined in the factory.
Extra front speakers
See Connect Extra loudspeakers/ Amplifier, p. 28.
If no extra front speakers/amplifier are connected, do not change the
predefined factory setting which is
No (TV).
Rear speakers
See Connect Extra loudspeakers,Amplifier, p. 27.
If no rear speakers/amplifier are connected, do not change the predefined
factory setting which is
No (TV).
Install TV Setup
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
J SETUP
Decoder/Descrambler
Programme
Decoder status
J Programme
SETUP
Digital Sources
Decoder/Descrambler
(Picture tilt)
Information line
Factory settings
Extra front speakers
Rear speakers
Auto Surround on/off
NEX
TV
IEW
provider none, 0...99
Auto format yes/no
INSTALLATION
J Digital sources
2059.1 gb /05 15-05-2000 15:33 Pagina 7
8
Installation
Auto surround
Sometimes a broadcaster will transmit special signals for Surround Sound
encoded programmes.
Dependent on your speaker configuration, the TV can automatically switch to
the best surround sound mode when Auto Surround is switched
On.
When rear speakers are connected and selected, Dolby Pro Logic will be
reproduced.When no rear speakers are connected, 3D surround will be
reproduced. It is however possible to override this setting.
NEXTV
IEW provider
Most broadcasters in Europe are offering teletext pages containing the day’s
programme schedule.These pages can be requested by switching the TV to
Teletext Guide.
An increasing number of broadcasters are offering an extended programme
guide service called
NEXTVIEW.
NEXTV
IEW is a new way of presenting programme schedules and offers more
features than basic teletext.With
NEXTVIEW it is possible to show for instance
all the movies or children programmes for tonight or the following days.
If you select None as
NEXTVIEW provider, the TV will capture all data from
the available TV channels which broadcast
NEXTVIEW. Broadcaster defined
menus will not be available.
If you select a programme number of a TV channel stored in the favourite list
as
NEX
TVIEW provider, the selected TV channel will provide NEXTVIEW data
and additional information of its own broadcasts as well as from other (non
selected) TV channels.
Normally you will select the
NEXTVIEW
provider that transmits most
information in your language.You can make the best selection via information
from TV announcements or from the newspapers.
Important:
In order for
NEXTVIEW to function properly, the first TV channel from the favourite list
should also broadcast the correct local date and time via teletext.
Please check at startup if the time and date are correct in the
NEXTVIEW screen.
Remark:
Not all TV channels support
NEXTVIEW.
How to make use of
NEXTVIEW, see p. 17.
Auto Format
Selecting
Ye s causes the picture to automatically fill as much of the screen as
possible when the TV programme does not override the special signals
indicating the correct screen format.
With the q key on the remote control you can always select different
picture formats. See p. 11.
Installation
Select
Installation and press the OK key to return to the INSTALLATION
menu.
To exit from the menu press the Ï key repeatedly.
SETUP
Digital Sources
Decoder/Descrambler
(Picture tilt)
Information line
Factory settings
Extra front speakers
Rear speakers
Auto Surround on/off
NEX
TV
IEW
provider none, 0...99
Auto format yes/no
INSTALLATION
J
NEX
TV
IEW
provider none/o...99
2059.1 gb /05 15-05-2000 15:33 Pagina 8
9Use of the remote control
Operation
Use of the remote control
M h a
SMART
ACTIVE
CONTROL
SMART
PICTURESOUND
213
546
879
0
B
w
®
Ò
‡π
æ b
Ï
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
SQ
MOVIE SPORT CHILD NEWS OTHER
OK
MENU
w Select peripherals
Press this key repeatedly to select
EXT1,
EXT2, EXT3 or FRONT, depending on where
you connected your peripherals (p. 29).
TV VCR DVD SAT TUNER CD TAPE CDR
Press one of these keys to use the remote
control in the TV, video recorder, DVD or
satellite mode. A green indicator lights up.
Press the same key again within 3 seconds to
use the remote control in the mode
indicated below the key (tuner, CD, tape or
CD-recordable).
A red indicator lights up.
Press the key again to return to the function
mentioned above the key.
B Standby
The set is switched off and the red indicator
(orange when acquiring
NEXTVIEW
information) lights up.When acquiring
NEXTVIEW the TV is switched to full standby
after a period of max. 1 hour and the red
indicator lights up.
To switch the TV on again, press - P + or the
digit keys.
If your EasyLink video recorder has the
system standby function and you press the
standby key for 3 seconds, both the TV and
video recorder are switched to standby.
®Ò‡π†Video recorder see p. 29
æ NEXTV
IEW
on/off see p. 17
OK Press this key to activate your choice,
when in the menus.
S Freeze
To freeze/unfreeze the picture and when in
teletext, to hold a teletext page.
Q Surround mode
Press this key repeatedly to select another
available surround mode: Dolby Pro Logic,
3D Surround, Dolby 3 Stereo, Stereo or Hall.
i Screen information
Press for 5 seconds to activate/de-activate
the extended or reduced display of TV
channel and programme information on the
screen.
Press briefly to display information about the
selected TV channel and programme, the
sound reception, picture settings, the selected
DNR setting and the remaining time set with
the sleeptimer.
0/9 Digit keys
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
To switch immediately to a selected one digit
TV channel, keep the digit key pressed a bit
longer.
0 Previous programme
The previously selected TV channel is displayed.
The indication is only video recorder/DVD.
Use of the remote control
b Teletext on/off see p. 22
Ï Main menu on/off see p. 12
V Volume
Press + or - to adjust the volume.
¬ Mute
Temporarily interrupt the sound or restore
it.
P
Programme selection
To browse through the TV channels
activated in the Favourite Programme menu.
2059.1 gb /05 15-05-2000 15:33 Pagina 9
10
Use of the remote control
213
546
879
0
B
w
æ
Ï
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
Q
OK
MENU
fU
q P
f
h
ZOOM
INSTANT
b
S
bcd
Mah
SMARTSMART
ACTIVE
CONTROL
MOVIE SPORT CHILD NEWS OTHER
h Active control
Active control is a pro-active and automatic
system.The TV continuously measures and
corrects all incoming signals in order to
provide the best picture possible.Thanks to
the Ambient Light Sensor which measures
the light conditions of the room in which the
TV is situated, the contrast, dynamic contrast,
brightness and colour picture settings are
adjusted automatically. The light sensor is
active when the Active control function is
switched to Medium or Maximum. Press the
h key repeatedly to select the Active
Control values Off, Minimum, Medium or
Maximum.
Off Sharpness and Dynamic Contrast are
controlled automatically
Minimum Sharpness, Dynamic Contrast
and Noise Reduction are controlled
automatically.
Medium Dynamic Contrast, Colour,
Sharpness and Noise reduction are
controlled automatically.
Maximum Contrast, Dynamic Contrast,
Colour, Sharpness and Noise reduction
are controlled automatically.
Press the cursor in the up/down directions
while the selected Active Control setting
information is on the screen.
The Active Control menu appears.
The picture settings are continuously and
automatically being adapted.
The menu items cannot be selected.
Colour enhancement (skintone correction,
green enhancement and blue stretch) is
switched on with certain Smart Picture
selections.
Press the cursor in the up/down directions
again to switch off the menu.
c no function
b Dual Screen
& Press the b key to switch on Dual Screen.
The TV screen is divided into 2 parts:
- the left side for the normal main
picture,
- the right side for teletext broadcast by
the selected TV channel or for
NEXTVIEW/Teletext Guide.
To operate
NEXTVIEW/Teletext Guide,
see p. 17.To operate teletext, see p. 22.
If Dual Screen is
Off, the picture, teletext or
NEXTVIEW/Teletext Guide are displayed full
screen.
é Press the q key under the door of the
remote control to reduce the height in dual
screen mode. Press again to return to full
height.
Press + P - to run through the teletext
pages.
Select still teletext picture
Press the d key to freeze only the
teletext picture.The info in this page is not
being updated by the teletext broadcaster.
( When in Teletext Dual Screen, press the
b key to return to a full screen picture or
press the b key to return to full screen
Teletext.
§ When in NEXTVIEW/Teletext Guide Dual
Screen, press the æ key to return to a full
screen picture or press the b key to
return to a full screen
NEXTVIEW/Teletext
Guide .
Strobe
Press this key to reproduce the picture image
by image.
Press the key again to have a faster speed.
Press the again to switch off the strobe
function.
U Time display
The time, downloaded from the TV channel (with teletext) stored on
programme number 1 or the lowest favourite programme number, is
displayed on the screen.
This function is not available when continuous subtitles have been switched on.
SUfh Teletext functions see p. 23
h Zoom
Press the
ZOOM h key repeatedly to select one of the zoom modes (x1,
x4, x9, x16). When zoomed you can shift the zoom window over the screen
with the cursor keys.
Press i to activate/de-activate the continuous display of the zoom
magnification.
The zoom window is reset after: selecting another TV channel, another
picture format or when another picture format is selected automatically.
Zooming is disabled in Dual screen mode.
2059.1 gb /05 15-05-2000 15:33 Pagina 10
11Use of the remote control
U
qP
fh
INSTANT
ZOOM
213
546
879
0
B
w
®
Ò
‡π
æ b
Ï
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
SQ
MOVIE SPORT CHILD NEWS OTHER
OK
MENU
bcd
Mah
SMARTSMART
ACTIVE
CONTROL
X Bilingual choice and
sound mode selection
Press this key
to switch from
Stereo to Mono sound, in
case of stereo transmission, or from
Nicam Stereo to Nicam available, in case
of Nicam transmission;
to choose between language Y (Dual Y) or
language Z (Dual Z), in case of bilingual
transmission.The setting is separately
stored for each TV channel.
® Instant record
If your video recorder has the EasyLink
function the
INSTANT ® key for record can
be operated in the TV mode.
q Picture format
Press this key repeatedly to select a different
picture format: 4:3, Movie Expand 14:9,
Movie Expand 16:9 with or without subtitling,
Wide Screen, Super Zoom or Automatic
(when Auto format is set to Yes in the
SETUP menu).
Auto format makes the picture fill the screen
as much as possible.
Sometimes video recorder programmes also
carry special signals which will automatically
switch the TV to the correct screen format.
Auto format is disabled when in Dual screen.
When in Movie Expand 14:9, 16:9 or Super
Zoom, you can reposition the picture
vertically with the cursor up/down to make
subtitles visible.
P Dyn. Noise Reduction
To reduce the image noise and improve
picture quality when receiving weak signals.
Press the P key to select
Off, Minimum,
Medium or Maximum.
Select TV channels by theme
If programmes in the TV guide of
NEXTVIEW
have defined themes, it is possible to quickly
select TV programmes with the coloured
keys.
& Press the red, green, yellow or blue key
to select one of the four predefined
theme categories
MOVIES, SPORTS,
CHILDREN, NEWS.
The TV switches to the first TV channel
broadcasting a programme of the
selected theme. At the same time a list
of all the TV channels currently
transmitting a programme of the selected
theme appears on the screen.
é Use the cursor up/down to select a TV
channel.
Press the same colour key again to
remove the list.
Under the grey key you can programme
your own theme category.
(Default; the theme category
Shows has
been preprogrammed in the factory.)
Press the cursor up and select a
preferred theme from the theme list
with the cursor left/right.
From now on the selected theme
category is stored under the grey key.
A list of all the TV channels currently
transmitting a programme of the selected
theme appears on the screen.
Smart Keys
To select predefined picture and sound settings.
M Smart Sound
Each time it is pressed, a different sound setting is selected, corresponding with
specific factory setting of the equalizer.
a Smart Picture
Each time it is pressed, a different picture setting is selected, corresponding with
specific factory settings of Contrast, Colour, Sharpness, Colour Enhancement and
Dynamic Contrast.
Personal refers to the personal preference settings of picture and sound selected
in the picture and sound menu.
Remark: if you are in a predefined smart sound or picture setting and you modify a setting
in the picture or sound menu, all the values of the stored settings will be overwritten.
2059.1 gb /05 15-05-2000 15:33 Pagina 11
12
Use of the menus
& Press the Ï key to display/cancel the MAIN MENU.
é Use the cursor in the up/down directions to select the PICTURE, SOUND or
FEATURES menu and also to select the PROGRAMMES.
Press the cursor right to activate the selected menu.
Use the cursor in the up/down, left/right directions to select the menu item.
( Use the OK key to activate.
§ Press the Ï key repeatedly to return or to switch the menu off.
Picture menu
If an NTSC peripheral is connected to one of the euroconnectors, the option Hue will
also appear in the menu.
Sharpness
You can adjust the sharpness.
Tint
Select the colour temperature:
Normal, Warm or Cool.
Digital options
Although Natural Motion is the most ideal setting, it may be preferable to
switch back to Digital Scan and/or 100 Hz.
To make all the 3 digital options available and selectable, first select a 4:3
picture format.
100 Hz = 100 Hz only (Field flicker reduction)
Dig. Scan = 100 Hz + Dig. Scan (Field and line flicker reduction)
Natural Motion = 100 Hz + Dig. Scan + Natural Motion (Field and line
flicker reduction and smooth movement reproduction)
Note: if the menu item Digital options is not present, first select a 4:3 picture format
with the q key.
Dynamic Contrast
To make the contrast in the darker and the brighter picture areas more
noticeable, select the
Med setting.
In certain circumstances it may be preferred to select
Min, Max or Off.
The modified adjustments for Contrast, Brightness, Colour, Sharpness,Tint,
Digital options and Dynamic Contrast are automatically stored for all TV
channels.
Select
Factory settings in the Setup menu to restore the predefined factory
settings, see p. 7.
Sound menu
Surround settings, see p. 13-14.
Graphic equalizer
Here you can select the preferred sound setting which corresponds with the
personal sound settings.
Select
Factory settings in the Setup menu to restore the predefined factory
settings, see p. 7.
Headphone volume
See Connect Peripheral Equipment, p. 26 for the connection of the
headphone.
Use of the menus
SOUND
Volume
Volume
Graphic equalizer
Headphone volume
J Surround settings
MAIN MENU
Contrast
SOUND
FEATURES
PROGRAMMES
J PICTURE
OK key to activate
cursor to select
adjustments
return or switch
main menu on/off
213
546
B
w
æ b
Ï
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
SQ
MOVIE OTHERNEWSCHILDSPORT
OK
MENU
PICTURE
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic Contrast
J Contrast L M
2059.1 gb /05 15-05-2000 15:33 Pagina 12
13Use of the menus
Surround settings menu
Select Surround settings in the Sound menu.
With no extra loudspeakers connected
Do not change the predefined factory settings of Extra front or rear speakers in the
Setup menu, p. 7.
Note: you can select only those surround modes which can be used with the
broadcast signal.
The graphical representation of the TV speakers is displayed and updated
according to the selected surround mode. Speakers which are active are
highlighted.
3D surround mode, which enables you to experience the effect of Dolby
Surround Pro Logic, is represented by the symbol ®r.The menu item
3D effect appears in which the level of the 3D effect can be selected.
Adjustment of the volume level of the loudspeakers
The menu item
Test which only appears in Dolby 3 Stereo and 3D Surround
mode, enables you to balance the internal loudspeaker volume levels.
& Select Dolby 3 Stereo or 3D Surround.
é Select Test start and press the OK key.
A steady noise tone is switched sequentially through the loudspeakers.The
loudspeakers activated light up in the screen graphic.
Select Centre volume or Balance and alter the selected adjustment.
Select Test stop and press the OK key when you have finished the
adjustment of the speaker levels.
Surround mode
Select the Surround Sound mode according to the sound mode being
broadcast.
3D Surround (with Dolby Surround broadcasts)
3D Surround enables you to experience the effect of Dolby Surround Pro
Logic without the need of having rear speakers connected.
The graphical representation of the rear loudspeakers is replaced by the
symbol ®r.
Select the level of
3D effect with the cursor left/right.
Dolby 3 Stereo (with Dolby Surround broadcasts)
The sound signal is now distributed over the front left, the front right and the
centre loudspeaker.
Stereo
This mode only reproduces the left and right front sound signals.
You only hear stereo sound if the broadcast which you are receiving is
transmitted in stereo or digital sound.
Press the Ï key to return to the
SOUND menu.
Go on with page 16.
Dolby 3 Stereo
Surround settings
Test start
Test stop
Centre volume
Balance
3D effect
Surround mode
••
•••
•••
••
••
Available menu items dependant on the
selected and available Surround modes.
Stereo
3D surround
Surround settings
Test start
Test stop
Centre volume
Balance
3D effect
Surround mode
Dolby Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
*
3D Surround
Dolby 3 Stereo
Stereo
2059.1 gb /05 15-05-2000 15:33 Pagina 13
14
Use of the menus
14
With extra loudspeakers connected
The contents of the Surround settings menu depends on the extra
speakers/amplifiers connected and on the configuration settings selected in
the Setup menu. See Connect Peripheral Equipment, Extra loudspeakers, p. 27
and Install TV Setup, p. 7.
If no extra front or rear speakers are connected do not change the predefined
factory settings of Extra Front and Rear speakers.
Note: you can select only those surround modes which can be used with the
broadcast signal.
The graphical representation of the speakers is displayed on screen when
controls are being changed or when in test tone mode.
The drawing on screen is updated according to the chosen setup and the
selected surround mode. Speakers which are active are highlighted.
In 3D surround mode the graphical representation of the rear loudspeakers is
replaced by the symbol ®r.The menu item 3D effect appears and the level
of the 3D effect can be adjusted.
With two extra rear surround loudspeakers connected
The menu item Test which only appears in Dolby 3 Stereo, 3D Surround
mode or Pro Logic, enables you to have a reference of the internal and the
rear loudspeakers loudness.
& Select Dolby 3 Stereo, 3D Surround or Pro Logic.
é Select Test start and press the OK key.
A steady noise tone is switched sequentially through the available
loudspeakers, for 2 seconds each.This enables you to have a reference of the
loudness of each loudspeaker.
The loudspeakers activated light up in the screen graphic.
Select Centre volume, Balance or Rear volume and alter the selected
adjustments.
Select Test stop and press the OK key when you have finished the
adjustments of the speaker levels.
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume
3D effect
Surround mode
•••
•••••
••
•••••
•••
•••
Available menu items dependant on the
selected and available Surround modes.
Stereo
3D surround
Pro Logic
Dolby 3 Stereo
Hall
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume
3D effect
Surround mode
2059.1 gb /05 15-05-2000 15:33 Pagina 14
15Use of the menus
15
Surround modes
Select the Surround mode according to the sound mode being broadcast.
3D Surround (with Dolby Surround broadcasts)
3D Surround enables you to experience the effect of Dolby Surround Pro
Logic without the need of having rear speakers connected or activated.
The graphical representation of the rear loudspeakers is replaced by the
symbol ®r.
Select the level of 3D effect with the cursor left/right.
Pro Logic (with Dolby Surround broadcasts)
In addition to the left and right internal speakers, the centre and the rear
surround loudspeakers reproduce the Dolby Surround Pro Logic sounds.
This sound is always present in the movie or programme marked with G
Dolby Surround.
This mode is especially recommended for such programmes or movies.
Dolby Pro Logic signals are also present on some DVD tracks.
Dolby 3 Stereo (with Dolby Surround broadcasts)
The sound signal is now distributed over the front left, the front right and the
centre TV loudspeakers.
The rear loudspeakers do not produce any signal and there is no rear 3D
effect.
Hall
The sound source is distributed over the rear loudspeakers which creates a
hall effect at the rear.
The centre loudspeaker does not reproduce any signal.
This mode is recommended when you wish to add surround sound to a
broadcast which is not encoded in Dolby Surround or to a mono signal.
Stereo
This mode only reproduces the left and right front sound signals.
You only hear stereo sound if the broadcast which you are watching or
listening to is transmitted in stereo or nicam stereo.
With two extra front loudspeakers connected
To enhance the sound reproduction of your TV you may connect two extra
front loudspeakers via an external amplifier. See Connect Peripheral
Equipment, Extra loudspeakers/Amplifier, p. 27.
In the Surround modes, Hall and Stereo
(+ amp) is added to indicate that you
should switch on your amplifier as in these modes the internal TV speakers
do not produce any sound.The subwoofer output is muted.
Note: If extra front speakers are connected and selected, all internal TV speakers
produce centre sound in the surround modes Pro Logic, Dolby 3 Stereo and 3D
Surround.
Press the Ï key to return to the
SOUND menu.
3D Surround
Pro Logic
Dolby 3 Stereo
Hall
Stereo
2059.1 gb /05 15-05-2000 15:33 Pagina 15
16
Use of the menus
Features menu
& Press the Ï key to display/cancel the MAIN MENU.
é Use the cursor in the up/down directions to select the FEATURES menu.
Press the cursor right to activate the selected menu.
Use the cursor in the up/down directions to select a menu item.
( Use the cursor in the left/right directions to select the desired setting.
Sleeptimer
With the sleeptimer you can set a time period after which the TV should
switch itself to standby.
The counter runs from
Off up to 180 min.
One minute before the TV is set to go to standby, the remaining seconds
appear on screen. Not visible in dual screen mode.You can always switch off
your set earlier or change the set time.
Child lock
If the child lock is on, the TV can only be switched on with the remote
control.The P - and + keys on top of the TV cannot be used to select a TV
channel. In this way you can prevent unauthorised use of your TV.
If the message
Child lock On appears, the child lock must be switched off
before you can use the P - and + keys on top of the TV to select a TV
channel.
Subtitle
TV channels with teletext often transmit certain programmes with subtitling.
See Teletext, Continuous Subtitles, p. 24 how to select the proper subtitle
page from the teletext index.
Select
Subtitle On or Off.
Press the Ï key to switch off the Features menu.
Programme list
& Press the Ï key to display/cancel the MAIN MENU.
é Select PROGRAMMES with the cursor up/down.
Press the cursor right to display an overview of all the TV channels installed.
Press the cursor up/down to run through the list and press OK to select the
desired TV channel.
( Press the Ï key to switch off the Programme list.
Sleeptimer Off
Child lock Off
Subtitle Off
J FEATURES
OK key to activate
cursor to select
adjustments
return or switch
main menu on/off
213
546
B
w
æ b
Ï
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
SQ
MOVIE OTHERNEWSCHILDSPORT
OK
MENU
2059.1 gb /05 15-05-2000 15:33 Pagina 16
17NEXTVIEW
In the Setup menu, p. 8 you were asked to select a
NEXTVIEW provider.
If the selected provider supports
NEXTVIEW then the TV will automatically
present the
NEXTVIEW programme schedule. If the TV channel supports just
teletext, then the TV will switch automatically to Teletext Guide.
Both facilities are offering the same functions: record, remind, info and watch.
However in case of Teletext Guide the broadcaster is responsible for the
availability of these functions.
Some broadcasters provide information about their own programmes and
sometimes other TV channels for one or more days.You can search for the
programmes you want to watch up to 7 days in advance. It is also possible to
search for a programme by theme, e.g. sport, movie, etc. Once a programme
has been selected it can be tagged, to remind you, or to record on the video
recorder automatically (provided the video recorder is equipped with
NEXTVIEWLink), once, daily, weekly or series.
Teletext Guide/
NEXTVIEW also allows direct access to detailed information
about programmes if provided by the broadcaster.
The broadcaster is responsible for the content of the information.
The TV is responsible for the capture of that information and for the presentation to
the user.
Use of the Teletext Guide/
NEXTV
IEW menus
& Press the æ key on the remote control to display/cancel the Teletext Guide/
NEXTVIEW menu.
é Use the cursor in the up/down, left/right directions to select the date, DAY
for the daily guide and the time block (in steps of 15 minutes), CHANNEL for
the channel guide,
THEME for the theme guide, OVERVIEW for an overview
of all the programmes which are marked as reminders or for recording, the
programme guide page number or to enter the programme list.
NEXTVIEW / Teletext Guide
Teletext Guide NEXTVIEW
Enter the proper programme guide page number
with the digit keys or with the – P + keys.
Press the cursor left/right to run through the
subpages.
( Select a programme with the cursor up/down.
§ Press one of the colour keys to select one of the
basic functions (if available);
record, remind, watch,
info. See Basic functions further on.
è Press the OK key to return to the header area
again.
Select a programme with the cursor up/down.
Press one of the colour keys to select one of the
basic functions (if available);
record, remind, watch,
info. See Basic functions further on.
( Press the OK key to return to the header area
again.
OK key
to activate
cursor to select
adjustments
213
546
B
w
æ b
Ï
SQ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
MOVIE OTHERNEWSCHILDSPORT
OK
MENU
æ
NEXTVIEW
selection
Menu Day Channel Theme Overview
BBC1 BBC2
p.202 p 01 02 ... π
BBC1
11.03 ................
14.35 ................ 226/3
17.50 ................ 231
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Menu Day Channel Theme Overview
CNN BBC1 BBC2
BBC1
NEX
TV
IEW
What’s on now
Preview
Themes
Ratings
Record
Remind
Info
Watch
2059.1 gb /05 15-05-2000 15:33 Pagina 17
18
NEXTVIEW
Teletext guide
TV channels which broadcast teletext also transmit a page with the
programme guide of the day. For each selected TV channel the programme
guide page can be selected with the æ key:
- automatically if the selected TV channel supports services like PDC
(Programme Delivery Control) or MIP (Magazine Inventory Page).
- if automatic pre-selection is not possible then the index page is displayed
and the proper programme guide page number of the selected TV channel
has to be entered with the digit keys.
The programme guide page will be stored automatically only if it satisfies
Video Programming via Teletext (VPT) requirements.
Every time you press the æ key, the programme guide page of the
selected TV channel will be available if the TV channel does not support
NEXTVIEW
.
The function items record, remind, info and watch, corresponding with the
coloured keys, become highlighted if the displayed programme page satisfies
the Video Programming via Teletext (VPT) requirements. Select a programme
item and press one of the function keys, e.g. Record or Remind. See Basic
functions further on.
The Info item is enabled if the selected programme contains a page number
with an optional subcode referring to a page with more info about the
programme.
NEXTV
IEW modes to sort and represent information
Menu
If in the Setup menu, see p. 8, you have selected a TV channel as
NEXTVIEW
provider which also supports NEXTVIEW. NEXTVIEW menu is displayed or can
be selected.The selected TV channel is responsible for this menu.
The
NEXTVIEW menu appears when NEXTVIEW is switched on.
Use the cursor up/down to select a menu item.
Use the cursor right to select the menu item.
While going through the menus, the TV is collecting the sorting criteria to
finally display a list of programme events.
The functions, in the left column, are shown at reduced brightness as long as
the menu is displayed.
If
None has been selected as NEXTVIEW provider in the Setup menu, the
broadcasters defined menu will not be available.
Menu Day Channel Theme Overview
BBC 2
p.202 p 01 02 ... π
BBC 2
11.03 ................
14.35 ................ 226/3
17.50 ................ 231
One moment please
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Menu
BBC1
NEX
TV
IEW
What’s on now
Preview
Themes
Ratings
Record
Remind
Info
Watch
2059.1 gb /05 15-05-2000 15:33 Pagina 18
19NEXTVIEW
Day
The day guide provides an overview of all programme titles active in the
selected time block.Time blocks are 15 minute intervals starting from the
current time of the current day.
The default order is based on the programme list of the favourite TV channels
as stored in the installation of the TV.TV channels not marked as favourite TV
channels will not appear.
Default
NEXTVIEW opens with the day screen if the broadcast does not have
its own menu.
Channel
The Channel guide provides an overview of all programmes that are
broadcast by a single channel during one day.
Previous programmes can be made visible via cursor up.
The list will start with the earliest broadcast programme.
With cursor left/right another favourite TV channel can be selected.
Theme
The theme guide displays a list of all programmes at the selected date, that
matches with the selected category (news, sport, culture, movies, ).
The default starting item will be the current or next programme on the
current TV channel.
The
THEME selection is only present if programmes in the TV guide have
defined themes.
Overview
The Overview menu provides a list of programmes that are marked as
reminders and those that have to be recorded.
When more than one programme to be recorded has an overlap in time,
these programmes will be marked by a red colour.
After the programme has been broadcast, all items set for once will be
deleted from the list the following day.This menu can be used to change a
reminder or programmes to be recorded.
Note: the TV will automatically interpret the broadcast time (as shown on the
teletext guide) of your selected programme into the correct local time and
date.
Monday 9 Oct 18:03
Channel
CNN BBC1 BBC2
BBC1
NEX
TV
IEW
........
........
........
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Theme
Series Movies News
BBC1
NEX
TV
IEW
BBC1
CNN
TVE
Record
Remind
Info
Watch
Monday 9 Oct 18:03
Overview
BBC1
NEX
TV
IEW
BBC1 17.10 .............
CNN 17.30 .............
TVE 18.05 .............
BBC2 19.00 .............
Record
Remind
Info
Watch
Record
Remind
Info
Watch
Info block
Monday 9 Oct 18:03
Day
p I 18.03-18.15 π 18.30
BBC1
NEX
TV
IEW
J channel - start - prog.
2059.1 gb /05 15-05-2000 15:33 Pagina 19
20
NEXTVIEW
Basic functions
The functions Record, Remind, Info and Watch can be activated with the
corresponding colour keys on the remote control.
If the function is not available, then the text is shown at reduced brightness.
Select a programme with the cursor up/down.
Record R or Remind !
& Press the red colour key to activate Record or the green colour key to
activate
Remind.
If the programme number of the broadcaster is not known, a message appears with
the request to input the right number.
A small menu pops up in which you can choose the interval: once, daily or
weekly, or clear an earlier made record or remind setting.The default interval
is set to
Once. If a programme is an episode of a series, it is identified by the
system and the options
daily and weekly are replaced by the option series.In
this case the system identifies when the next episode of the series will be
broadcast.This is not possible in the Teletext guide.
é Use the cursor in the left/right directions to select the interval.
The colour of the tag refers to the interval.
Press the OK key.
When
Record R is activated:
Storing is displayed to indicate the video recorder is programmed.
When
Remind ! is activated:
- a message will be displayed the moment the tagged programme
with ! starts, when watching the TV later on.
- the TV switches on the moment the tagged programme with ! starts,
when the TV is in standby.
Note: Recordings and reminders are not possible when the broadcaster does not
transmit dates and times of the programmes.
The message
No TV programming possible appears.
Make sure you are on the TV programming page.
Info
& Press the yellow colour key to activate Info.
Advertisements or information relating to the selected programme are
displayed. In some cases all of the information does not fit on the screen. Use
the cursor up/down to browse through all the information.
é Press the yellow colour key again to switch off the information.
Watch
Press the blue colour key to activate
Watch.
This function is only available if a currently broadcast programme is selected.
Otherwise the function is not available.
The selection causes the TV to tune to the selected TV channel.
NEXTVIEW is
switched off.
Record
Remind
Info
Watch
Info block
Date Time
Channel
CNN BBC1 BBC2
BBC1
NEX
TV
IEW
11.03 Travel Guide
14.35 World news
17.50 Insight
R
!
p
Once
π
Daily Weekly Clear
2059.1 gb /05 15-05-2000 15:33 Pagina 20
21NEXTVIEW
Select Picture/
NEXTVIEW-Teletext Guide
Press the æ key.
Press the b key.
The screen is divided into two parts: the left side for the normal main picture,
the right side for
NEXTVIEW
/Teletext Guide.
Press the b key to return to a full
NEXTVIEW/Teletext guide screen, or press
the æ key to return to a full picture screen.
Acquisition and updating of NEXTVIEW information
Acquisition and updating of NEXTVIEW is done when you are watching the TV
channel of the selected
NEXTVIEW provider, see Setup menu p. 8, or when the
TV is switched to standby.
The indicator on the front of the TV remains orange during standby.
After all needed acquisition or updating is complete, it turns red.
Acquisition of fresh data will happen once during the night.
Note: it may be necessary to put the TV in standby mode when all
NEXTVIEW
information is outdated, e.g. returning from holiday.
Video recorder restrictions with
NEXTVIEW
The Record item and the automatic recording will only be present and
possible if your video recorder is equipped with
NEXTVIEWLink.
Your video recorder should be connected to
EXTERNAL 2. See Connect
Peripheral Equipment, p. 25.
The daily, weekly and series options, the number of recordings set and the
way overlapping recordings are managed, depend on the type of video
recorder you have.When all video recorder timers are full, the item
Record
in the menu will not be present.
Upload video recorder overview (only with Philips sets)
When the TV is switched on, the timer recordings are uploaded to the TV to
check if any manual addition or deletions have been done.This is shown in the
overview.
The video recorder manages and removes timer recordings when performed.
Some
NEXTVIEWLink video recorders do not allow a daily programming of the
recording to start on a Saturday or Sunday. In this case the item
daily will be
removed from the menu on those days.
213
546
879
0
B
w
æ b
Ï
i
TV VCR DVD SAT
TUNER
MOVIE SPORT CHILD NEWS OTHER
CD TAPE CDR
¬V P
0
SQ
OK
MENU
b cd
Mah
SMARTSMART
ACTIVE
CONTROL
b
æ
2059.1 gb /05 15-05-2000 15:33 Pagina 21
22
Teletext
Most TV channels broadcast information via teletext.
Each channel which broadcasts teletext transmits a page with information on
how to use its teletext system. Look for the teletext page with the main
index (usually p. 100).
Depending on the TV channel, teletext is transmitted in different systems.
The colours used in the options line correspond with the colour keys of your
remote control.
About Easy Text
Easy Text considerably reduces the waiting time (on condition that the TV
channel broadcasting the teletext is received for at least half a minute) by :
a direct selection of the previous and following pages which are being
transmitted and of the pages referred to in the options line
a habit watcher list: frequently used pages are put automatically in a list of
preferred pages, so that they are immediately available
the precapturing of the page numbers referred to in the displayed page
the precapturing of all the subpages.
Switch Teletext on and off
Press b to switch the teletext on or off.
The main index page appears on the screen together with two information
lines at the top and one option line at the bottom of the screen.
Remark: if the displayed teletext characters on screen do not correspond with the
characters used in your language, press the X key, under the door of the remote
control, repeatedly to select Language group 1 or 2.
Select a Teletext page
With the digit keys
Enter the desired page number with the digit keys.
The page counter seeks the page or the page appears immediately when the
page has been previously stored in the memory.
A message appears when you have entered a non existent or incorrect page
number. Page numbers beginning with 0 or 9 do not exist. Choose another number.
With the option line
Select with the colour keys, corresponding to the coloured options at the
bottom of the screen, the desired subject.
Select Picture/Teletext
Select a TV channel which broadcasts teletext.
Press the b key.
The screen is divided into two parts:
the left side for the normal main picture,
the right side for teletext broadcast by the selected TV channel.
Press the b key to return to a full screen picture or press the b key to
return to a full teletext picture.
Quickly run through the teletext pages
Press the cursor up/down or the - P + key to run through the previous or
the following pages.
Select the previously selected txt page
Press the 0 key.
Teletext
cursor to select
pages
colour keys to
select
213
546
879
0
B
w
æ b
Ï
i
SQ
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
OK
MENU
b
0
X
U
X ®qP
f
h
ZOOM
INSTANT
879
0
i
0
b cd
Mah
SMARTSMART
ACTIVE
CONTROL
b
2059.1 gb /05 15-05-2000 15:33 Pagina 22
23Teletext
Select the index teletext page
Press the grey colour key to display the main index (usually p.100).
Only for T.O.P teletext broadcasts :
T.O.P orders the pages in categories and adds other possibilities of enhancing
ease of use.
Press i. A T.O.P. overview of the teletext subjects available is displayed.
Not all TV channels broadcast T.O.P. teletext.When the teletext system
is not T.O.P. teletext, a message appears at the top of the screen.
Select with the cursor up/down, left/right the desired subject and press the
OK key.
Select subpages
When a selected teletext page consists of different subpages, one of the
subpages appears on the screen.
The coloured number in the first information line refers to the displayed
subpage.
The other subpages can be selected in 2 ways :
With the cursor left/right
The other subpage numbers appear in white as soon as the transmission has
found them.They are stored in the memory so that they are available while
the teletext page is on screen.
Select with the cursor left/right the previous or the following subpage.
With the U key
Enter the subpage number yourself:
Press U. Enter the desired subpage with the digit keys : e.g. 3 for the third
page of seven subpages.
The TV searches for the selected subpage.
Automatically rotating subpages:
Press U again to cancel the entered digit key for the subpage.
Now the subpages rotate automatically.
Press U again to select the subpages with the cursor left/right again.
Special teletext functions
Hold
Press S to stop the automatically rotating of the subpages or to stop the
page counter from seeking when you have entered a wrong page number or
when the page is not available.
Enter another page number.
Enlarge
Press h repeatedly to display the upper part, the lower part and then to
return to the normal page size.When the upper part is displayed, you can
scroll the text, line by line using the cursor up/down.
Reveal
Press f to reveal/conceal the hidden information, such as solutions to
riddles and puzzles.
cursor to select
subpages
OK to activate
S
213
546
879
0
B
w
æ b
Ï
i
S Q
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
OK
MENU
U
qP
f
h
ZOOM
INSTANT
U
f
h
i
MOVIE SPORT CHILD NEWS OTHER
2059.1 gb /05 15-05-2000 15:33 Pagina 23
24
Teletext
Select Continuous Subtitles
TV channels with teletext often transmit programmes with subtitling. For
each TV channel you can store a subtitle page which will be displayed
continuously if the programme being broadcast is transmitted with subtitles.
Switch on teletext and select the proper subtitle page from the index.
Switch off teletext.
Now the subtitle page is stored for the selected TV channel.
Once subtitles have been stored and
Subtitle On has been selected they will
automatically be displayed on the selected TV channel if subtitles are in the
transmission.
Select
Subtitle On or Off in the Features menu, see p. 16.
The subtitle symbol j appears when
Subtitle On is selected.
Remark: you are in teletext mode, so only teletext functions are available.
Should your remote control be lost or broken you can still change some of
the basic picture settings with the keys on top of the TV.
Press the M key repeatedly to select
Volume, Brightness, Colour, Contrast.
Press the P - or + keys to carry out the selected adjustment.
When the menu adjustment is not displayed, the P- or + keys enable you
to select the TV channels, the V - or + keys to adjust the volume.
The selected adjustment automatically switches off when no action has been taken
for 10 seconds.
Keys on top of the TV
M
P
V
2059.1 gb /05 15-05-2000 15:33 Pagina 24
25Connect Peripheral Equipment
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected
to your TV.The following connection diagrams show you how to connect
them.
Connect the aerial cables 1, 2 and, to obtain the optimum picture quality,
eurocable 3 as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it should be connected to
EXTERNAL 2 to benefit from the EasyLink
functionality.
If the eurocable 3 is not used the following steps are required:
Search for and store the test signal of the video recorder
& Unplug the aerial cable 1 from the aerial socket x of your video recorder.
é Switch on your TV and put the video recorder on the test signal.
(See the handbook for your video recorder.)
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual installation, p. 5.
Store the test signal under programme number 0 or between 90 and 99.
( Replace the aerial cable in the aerial socket x of your video recorder after
you have stored the test signal.
Decoder and video recorder
Connect a eurocable 4 to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 7.
You can also connect your decoder directly to
EXTERNAL 1 or 2 with a
eurocable.
Video recorder and other peripherals
(except Digital Sources)
& Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable 5 to
EXTERNAL 2
and a eurocable 4 to EXTERNAL 1 or 3.
é Look for the test signal of your peripheral in the same way as you do for
a video recorder.
When a video recorder is connected to
EXTERNAL 1 you can only record a
programme from your TV.
Only when a video recorder is connected to
EXTERNAL 2 it is possible to record a
programme from your TV as well as from other connected equipment. See Record
with your video recorder, p. 31.
Note:
EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS, Y/C and RGB,
EXTERNAL 3
only CVBS.
Video recorder
VCR 1
CABLE
1
4
2
EXTERNAL
2
3
VCR 1
CABLE
1
21
EXTERNAL
2
4 5
3
2059.1 gb /05 15-05-2000 15:33 Pagina 25
26
Connect Peripheral Equipment
& Connect your camera or camcorder to sockets at the right side of your TV.
é Connect the equipment to VIDEO 2 and AUDIO L 3 for mono
equipment.
Press the X key repeatedly to select the sound coming from one or
both loudspeakers of your TV.
For stereo equipment also connect AUDIO R 3.
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VIDEO input 1 and AUDIO inputs 3.
Camera & camcorder
AUDIO
VIDEO
SVIDEO
3
2
1
Connect your digital equipment with a eurocable 1 to one of the
euroconnectors (
EXT1, EXT2 or EXT3), or with a cinch cable to the VIDEO
input at the right side of the TV (see illustration above).
& Press U and f at the same time.
é Select Digital sources in the Setup menu of the INSTALLATION menu and
select:
None if you have no digital source connected,
EXT1, EXT2 or EXT3 if you have connected your equipment to a
euroconnector,
FRONT in case you connected to the right side of the TV,
Press the Ï key to switch off all menus.
Note: the low quality of some digital picture material may be the cause of digital
image distortion. In this case select
Eco under the SMART PICTURE a key on the
remote control as this setting is intended to improve distorted picture quality.
Digital equipment (DVD, digital satellite tuner,...)
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
SETUP
J SETUP
1/2/3
EXTERNAL
DVD
1
& Insert the plug into the headphone socket L at the right side of the TV.
é Press ¬ on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
SOUND menu select Headphone volume to adjust the headphone
volume. See p. 12.
L
Headphone
SETUP
Digital Sources
Decoder/Descrambler
(Picture tilt)
Information line
Factory settings
Extra front speakers
Rear speakers
Auto Surround on/off
NEX
TV
IEW
provider none, 0...99
Auto format yes/no
INSTALLATION
J Digital sources
2059.1 gb /05 15-05-2000 15:33 Pagina 26
27Connect Peripheral Equipment
Connect Extra loudspeakers / Amplifier
To the connector clips
(if provided)
To the output S
R
L
REAR
AUDIO
S
or
REAR multimedia loudspeakers
You can enjoy Dolby Pro Logic Surround sound by connecting two rear
loudspeakers to be connected or to the connector clips (if provided) or to
the Dolby Surround output S at the back of your TV.
& Connect two Surround Sound rear loudspeakers (min. 16 )
to the connector clips at the back of the TV. Always connect
both Surround Sound loudspeakers: the left rear loudspeaker
at
REAR L; the right rear loudspeaker at REAR R.
Push the connector clip down and insert the end of the wire into
the opening: the positive wire (the one with the black line) to the
red loudspeaker connection; the negative wire to the black
loudspeaker connection. Do not insert the wires too far.
The Surround Sound loudspeakers should always be located
behind or to either side of the listener. If preferred you can also
hang the loudspeakers on the wall.
é Select Rear speakers Yes in the Setup menu. See p. 7.
See Surround settings, p. 14 for the available Surround
modes.
Rear Surround Sound loudspeakers should always be located
behind or to either side of the listener at about 1 m above
the seated listeners head.
Adjust the volume of the rear loudspeakers.
You can use the Test tone function in the Surround settings
menu, see p. 13, as a reference to set the volume level of the
separate loudspeakers.
Note: Once you have adjusted the volume of the rear
loudspeakers, do not change it while watching TV, the volume
level of all the speakers is changed with the volume control of
the TV.
& Connect two rear loudspeakers with built in amplifiers (or
an audio amplifier with rear loudspeakers).
Connect the audio cables to the rear loudspeakers and to
the Dolby surround output S at the back of your TV as
shown above.
There is only one cinch output for both speakers. Use a
mono to stereo adaptor.
Note: Switch off the TV and the rear loudspeakers before
connecting them.
é Select Rear speakers Yes in the Setup menu. See p. 7.
See Surround settings, p. 14 for the available Surround
modes.
Rear Surround Sound loudspeakers should always be located
behind or to either side of the listener at about 1 m above
the seated listeners head.
Adjust the volume of the rear loudspeakers.
You can use - the Test tone function in the Surround settings
menu, see p. 13, as a reference to set the volume level of the
separate loudspeakers.
Note: Once you have adjusted the volume of the rear
loudspeakers, do not change it while watching TV, the volume
level of all the speakers is changed with the volume control
of the TV.
2059.1 gb /05 15-05-2000 15:33 Pagina 27
28
Connect Peripheral Equipment
Stereo amplifier and two extra FRONT speakers
To enhance the sound reproduction of your TV you can connect two extra
speakers via an external amplifier.
& Connect the audio cables to the audio input of your amplifier and to
AUDIO L and R at the back of your TV.
The output level is controlled by the volume control of your TV.
Note: Switch off the TV and your audio amplifier before connecting them.
Set the audio amplifier’s volume to minimum.
é Select Extra front speakers Yes (Amp) in the Setup menu. See p. 7.
See Surround settings, p. 14 for the available Surround modes.
Adjust the volume of the audio amplifier.
You may make use of the Test tone function in the Surround Settings menu,
see p. 13, to have a reference of the loudness of the separate loudspeakers.
Note: Once you have adjusted the volume of the amplifier, do not change it while
watching TV, the volume level of all the speakers is changed with the volume
control of the TV.
Dolby Pro Logic Surround amplifier
& Connect the Dolby Pro Logic Surround amplifier to the AUDIO L and R at
the back of your TV.
é Select Extra front speakers No in the Setup menu. See p. 7.
The audio output is now independent of volume, equalizer and surround
settings.
Switch off the volume of the TV with the mute key ¬.
All volume settings, tone control and speaker connections have to be done
via the external Dolby Pro Logic amplifier.
Attention: the sound info on screen will not correspond with the actual sound
reproduction.
If you want to connect more equipment to your TV, consult your dealer.
AUDIO
2059.1 gb /05 15-05-2000 15:33 Pagina 28
29Connect Peripheral Equipment
If the TV is connected to a video recorder with the EasyLink function, in some cases
the TV will be switched on, even when it was in standby. (E.g. playback tape,...)
This is not possible when Child lock On is selected.
Equipment connected with an aerial cable only :
Select the programme number under which you have stored the test signal
with the digit keys.
Equipment connected to a euroconnector or to the right side of
the TV
Press the w key repeatedly to select
EXT1, EXT2, EXT3 or FRONT,
according to where you connected your equipment at the back or the right
side of your TV.
Remark : Most equipment (decoder, video recorder, satellite receiver) carries out the
switching itself.
If you want to change to TV channels?
Enter the programme number of the TV channel which you want to watch
with the digit keys or press the TV key.
To select connected equipment
Most of the audio and video equipment from our range of products can be
operated with the remote control of your TV.
Press the
VCR, DVD, SAT,TUNER, CD,TAPE or CDR key according to the
equipment you want to operate with this remote control. See Use of the
remote control, p. 9.
Video recorder
Press one of the video recorder keys after you pressed the
VCR key:
® for record,
Ò for rewind,
for stop,
π for play,
for fast forward,
for selecting 1- or 2-digit programme numbers from the video
recorder,
- P + for sequential programme selection from the video recorder tuner,
0 to 9 to select a programme number from your video recorder tuner,
B to switch the video recorder to standby
U VCR timer
These keys function with equipment which use the RC5 signalling standard.
If your video recorder has the EasyLink function, the key
INSTANT ® for recording,
under the door of the remote control, can be operated in the TV mode.
If your EasyLink video recorder has the system standby function, when you press the
B key for 3 seconds, both TV and the video recorder are switched to standby.
Audio and video equipment keys
B
w
æ b
VCRTV DVD SAT
CDTUNER TAPE CDR
w
SQ
MOVIE OTHERNEWSCHILDSPORT
VCR
213
546
879
0
B
w
æ b
Ï
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
®
Ò
‡π
SQ
OK
MENU
INSTANT
U
XqP
f
h
ZOOM
INSTANT
®
®
U
®
Ò
π
2059.1 gb /05 15-05-2000 15:33 Pagina 29
30
Connect Peripheral Equipment
DVD keys
Press one of the following keys after you have pressed the
DVD key.
Ï to switch the DVD menu on or off
0 to select a DVD chapter
b to select a DVD title
æ to select your choice of subtitle language
Ò to search backward
stop
π play
to search forward
® pause
0-9 to select a programme number from your DVD
These keys function with equipment which use the RC6 signalling standard and with
Philips DVD players.
Satellite receiver
Press one of the TV keys after you have pressed the
SAT key.
These keys function with equipment which use the RC5 signalling standard.
Tuner, CD,Tape and CDR keys
Press one of the following keys after you have pressed the
TUNER, CD,
TAPE or CDR key.
Ï to switch the menu on or off (tuner)
0 to select a frequency (tuner)
® to record
Ò to search down (tuner); rewind (CD/tape); speed down (CDR)
stop
π play
to search up (tuner); forward (CD/tape); speed up (CDR)
b RDS display (tuner); info on screen (CD/CDR)
æ RDS news/TA (tuner); select following disc (CD/CDR)
S pause (CD/CDR/tape)
Q surround modes (CD/CDR/tape)
+ P - next/previous (CD)
DVD
SAT
213
546
879
0
B
w
æ b
Ï
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
®
Ò
‡π
SQ
OK
MENU
®
Ò
π
æ
b
Ï
0
bcd
Mah
SMARTSMART
ACTIVE
CONTROL
TUNER
CD
TAPE
CDR
213
546
879
0
B
w
æ b
Ï
i
TV VCR DVD SAT
TUNER CD TAPE CDR
¬V P
0
®
Ò
‡π
SQ
OK
MENU
®
Ò
π
æ
b
Q
S
Ï
0
bcd
Mah
SMARTSMART
ACTIVE
CONTROL
MOVIE SPORT CHILD NEWS OTHER
2059.1 gb /05 15-05-2000 15:33 Pagina 30
31Record
To record S-VHS quality, connect an S-VHS peripheral directly to the video
recorder.
Record a TV programme
& Select the programme number on your video recorder.
é Set your video recorder to record.
See the handbook for your video recorder.
Switching programme numbers on your TV does not disturb recording !
Record a programme on your video recorder connected to
EXTERNAL 2 from Audio/Video equipment connected to
EXTERNAL 1, EXTERNAL 3 or to sockets on the right side of the TV
& Switch on the equipment.
é Select the right external on your video recorder.
Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are
recording !
Record with your video recorder without EasyLink
If you have connected an S-VHS video recorder provided with the EasyLink function,
you can record S-VHS-quality from an S-VHS peripheral connected to the right side
of the TV. (E.g. from an S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
Press the
INSTANT ® record key, under the door of the remote control.
The video recorder switches on from standby and a message of what is being
recorded appears on the screen.
The video recorder starts recording the programme you are watching.
Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to
EXTERNAL 1, 3 or
FRONT
, you can not select another TV programme on the screen.
To watch TV programmes again, press the programme number you want to select
twice.
Attention: the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording of a programme from a peripheral
connected to
EXTERNAL 1, 3 or FRONT, the blinking lamp on the front of your TV
indicates that you are still recording.The blinking stops after the recording is finished.
Record with your video recorder with EasyLink
If your video recorder is equipped with
NEXTVIEWLink, and you tagged one or more
programmes to be recorded automatically in the
NEXTVIEW mode, it is not necessary
for the TV to be in the standby mode or switched on for the recording to start.
Record with your video recorder with NEXTVIEWLink
879
0
i
0
U
XqP
fh
INSTANT
ZOOM
®
INSTANT
®
2059.1 gb /05 15-05-2000 15:33 Pagina 31
32
Tips & Index
Care of the screen
Clean the TV with a slightly damp soft
cloth. Do not use abrasive solvent as it
can damage the TV screen.
Poor Picture
Have you selected the correct TV system?
Is your TV or house aerial located too
close to loudspeakers, non-earthed audio
equipment or neon lights, etc.?
Mountains or high buildings can cause
double pictures or ghost images.
Sometimes you can improve the picture
quality by changing the direction of the
aerial.
Is the picture or teletext unrecognisable?
Check if you have entered the correct
frequency. See Installation, p. 5.
Are brightness and contrast out of
adjustment? Select Factory settings in the
Setup menu, p. 7.
Sometimes poor picture quality is possible
when having activated an S-VHS camera or
camcorder connected to the right side of
your TV and another peripheral is
connected to
EXT1 or EXT2 at the same
time. In this case switch off one of the
other peripherals.
No picture
Is the aerial connected properly? Are the
plugs tightly connected in the aerial socket?
Is the aerial cable in good condition and
does it have suitable plugs?
Are the connection facilities to a possible
second TV in good condition? If in doubt,
consult your dealer.
No sound
No sound on any channel? Check the
volume isnt at minimum. Is the sound
interrupted with the mute key ¬? Check
if your speaker configuration corresponds
with the selections made in the Setup
menu, p. 7. E.g. is your amplifier switched
on when you have 2 extra front speakers
connected?
No sound from the rear speakers or the
centre speakers? Select an appropriate
surround mode, according to the
broadcasted sound signal or adjust the
volume. See Surround modes, p. 15.
Remote control
If your TV no longer responds to the
remote control, the batteries may be
dead.
You can still use the M key and the
-/+ keys at the top of your TV.
Menu
Have you selected the wrong menu? Press
the same key again to exit from the menu.
NEXTVIEW - No information
See Acquisition and updating of
NEXTVIEW
information, p. 21.
No solution
Switch your TV off and then on again
once.
Never attempt to repair a defective
TV yourself.
Check with your dealer or call a TV
technician.
End of life directives
Philips is paying a lot of attention to
produce environmentally-friendly in green
focal areas.Your new TV contains materials
which can be recycled and reused.
At the end of its life specialised companies
can dismantle the discarded TV to
concentrate the reusable materials and to
minimise the amount of materials to be
disposed of.
Please ensure you dispose of your old TV
according to local regulations.
How to dispose of dead batteries?
The batteries supplied do not contain the
heavy metals mercury and cadmium.
Nevertheless in many countries dead
batteries may not be disposed of with your
household waste. Please ensure you dispose
of dead batteries according to local
regulations.
a ACI,
5
active control, 10
auto format, 8
automatic installation, 5
auto surround, 8
b bilingual broadcast, 11
c camcorder, 26
centre volume, 13
child lock, 16
continuous subtitles, 24
country, 4
d decoder/descrambler, 7
digital options, 12
digital sources, 26
DNR, 11
dolby surround settings, 13
dolby 3 Stereo, 15
dual screen, 10
DVD, 30
dynamic contrast, 12
e easy text, 22
eurocable, 25
f factory settings, 7
favourite programmes, 6
freeze, 9
frequency, 5
front speakers, 7
g give name, 6
graphic equalizer, 12
h hall, 15
headphone volume, 12
hue, 12
i info on screen, 9
information line, 7
interrupt the sound, 9
l language, 4
m manual installation, 5
menu language, 4
n NEXTVIEW, 17
NEX
TVIEW provider,
8
nicam, 11
p picture adjustments, 12
picture format, 11
picture tilt, 7
programme selection, 9
programme list, 16
Pro Logic, 15
r rear speakers, 7
recording, 31
reshuffle, 6
s satellite receiver, 30
search for TV channels, 5
setup, 7
sleeptimer, 16
smart picture and sound, 11
sound adjustments, 12
stereo, 11
stereo (+ amp), 15
store TV channels, 4
subpages teletext, 23
surround mode, 15
S-VHS, 31
switch TV on, 3
t teletext, 22
v video recorder, 29
volume, 9
3D effect, 15
3D surround, 15
Tips
Index
2059.1 gb /05 15-05-2000 15:33 Pagina 32
33Glossary
100 Hz
100 Hertz provides a superior solution to
the problem of picture flicker which is
particularly noticeable with larger screen
sizes. In a conventional TV, the picture area
is scanned 50 times a second (50 Hertz)
a frequency which is still detectable by the
human eye in the form of a flickering
picture. In 100 Hertz sets, the picture area
is scanned at a rate of 100 times per
second (100 Hertz).At this frequency, the
eye cannot detect flicker, resulting in a
clearer picture which is more relaxing to
the eye.
Automatic Channel Installation (ACI)
Automatically installs all TV channels in
the same order as offered by your cable
company, provided of course that the data
is transmitted. It also automatically
includes programme number and
programme name.
With ACI, channel installation is fully
automatic, simple and fast.
Child lock
Feature to prevent unauthorised use of
your TV.
Digital Scan
If you look at a television screen you will
see small imperfections in the picture
caused by line vibration. Digital Scan (an
internal process) removes interline flicker.
When combined with 100 Hz, you will see
a totally stable image.
DNR
Digital Noise Reduction.
By encoding signals digitally in 100 Hz
sets, it is possible to clean up picture
noise.This is especially beneficial in poor
signal areas and when viewing poor quality
video tapes.
Dolby Surround Pro Logic
Literally wraps you in 4-channel sound. it
brings your favourite movies to life with
all the realism and impact of cinema sound
as though you are part of the action.
Easy Link
Digital intelligent ESI bus-system between
TV and VCR (Scart connection required).
Turns source selection and control into a
one-button operation.
Easy Text
Teletext memory that automatically
memorises Teletext pages and gives you
instant access to them.
Euroconnector
A 21-pin connector system enabling you
to simply connect various types of
audio/video and computer equipment.
Menu
On-screen display of functions and
facilities in a well-organised survey, which
you can select using your remote control.
NEXTVIEW
NEX
TVIEW is a new feature to assist the TV
and VCR user in selecting the programmes
she or he likes to watch from a television
programme guide on the screen. It enables
the user to see a description of every
programme, and mark interesting
programmes to be reminded (auto TV on)
or recorded (
NEXTVIEWLink video
recorder required).
NTSC
The broadcasting system used in the USA,
Japan and parts of South America and
Southeast-Asia.
Smart Picture and Sound controls
Keys on the remote control to select
predefined picture and sound settings.
Sleeptimer
Function with which you can set a time
period after which the TV should switch
itself to standby.
Picture Freeze
TV mode which allows you to freeze a
certain image in order to study a specific
detail at ease, e.g. to make notes of certain
programme information like phone
numbers.
Teletext
See also Easy Text
WST:World Standard Teletext.
FLOF: Full Level one Features. System
applied by the BBC, RVE.... that provides a
fast access to the teletext pages.
TOP:Table of (Teletext) Pages. German
system for an easy access to the teletext
pages.
Tint
TV-function to modify the general colour
balance between cool and warm and to
adjust it according to your personal
preference.
Glossary
2059.1 gb /05 15-05-2000 15:33 Pagina 33
Information for users in the UK
(Not applicable outside the UK)
Positioning the TV
For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators
or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc.
cannot obstruct the air flow through the ventilation apertures.
The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid
atmospheres.
General Points
Please take note of the section 'Tips' at the end of this booklet.
Interference
The Department of Trade and Industry operates a Radio Interference Investigation Service to help TV license holders improve
reception of BBC and IBA programmes where they are being spoilt by interference.
If your dealer cannot help, ask at a main Post Office for the booklet "How to improve Television and Radio Reception".
Mains connection
Before connecting the TV to the mains, check that the mains supply voltage corresponds to the voltage printed on the type plate
on the rear panel of the TV. If the mains voltage is different, consult your dealer.
Important
This apparatus is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug proceed as follows :
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS1362 5A,A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC directive, the mains plug on this product must not be removed.
Connecting the aerial
The aerial should be connected to the socket marked x at the back of the set. An inferior aerial is likely to result in a poor,
perhaps unstable picture with ghost images and lack of contrast. Make-shift or set-top aerials are unlikely to give adequate results.
Your dealer will know from experience the most suitable type for your locality.
Should you wish to use the set in conjunction with other equipment, which connects to the aerial socket such as TV games, or a
video camera, it is recommended that you consult your dealer on the best method of connection.
Stand (if provided)
Use only the stand provided with the set, making sure that the fixings are properly tightened.A diagram showing how to assemble
the stand is packed with the stand. Never use a make-shift stand, or legs fixed with woodscrews.
2059.1 gb /05 15-05-2000 15:33 Pagina 1
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 28pw9536 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips 28pw9536

Philips 28pw9536 Bedienungsanleitung - Holländisch - 33 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info