15 Digital camera and USB
issues
Notes:
• the latest version of this document can be
found on the Philips support website (www.
philips.com/support);
• the software of your TV is upgradeable. If
you have problems first check if you have the
latest software installed on your TV. The
latest software, together with instructions,
can be found on the Philips support website.
Use the type number of your TV to find this
documentation and other related files.
• Philips can’t be held responsible neither for
any errors in the content of this document
nor for any problems as a result of the
content in this document. Errors reported to
Philips will be adapted and published on the
Philips support website as soon as possible.
Digital Camera Issues
If a USB connection between your digital
camera and the TV isn’t working, you can try
the solutions below to resolve your problem.
• Make sure your digital camera is switched on
and verify if the configuration of your digital
camera is correct (see the manual of your
digital camera for more information).
• Some digital cameras allow you to switch off
the USB interface. Make sure that the USB
interface is switched on before connecting to
the TV.
• If you have a digital camera with only internal
memory (no removable memory) you can
try to copy the content manually to a USB
memory device using a personal computer.
• Some digital cameras allow you to switch
between PTP (Picture Transfer Protocol) or
“PC Link” and USB Mass Storage. Make sure
that you select USB Mass Storage or “PC
Drive” on your digital camera.
• If your camera supports different interface
settings be sure to try them one by one or
contact the reseller of your camera to find
out the correct setting.
USB Memory Device Issues
• Devices connected to the USB port of your
TV must be “Mass Storage Class” compliant.
If your device (digital camera. MP3 player,
portable harddisk, …) is not “Mass Storage
Class” compliant it will not be detected by
the content browser of the TV.
• The following subsets of the Mass Storage
Class specification are supported:
The implementation of the TV is based on
the “Universal Serial Bus Mass Storage Class
Specification Overview” (v1.2, June 23, 2003)
including all documents referenced by the
document. The document can be found on
the USB standardisation website (www.usb.
org).
Full support of the USB Mass Storage Class
Bulk-Only Transport (bInterfaceProtocol =
50h).
Full support of SubClass Code = 05h; SFF-
8070i spec.
Full support of SubClass Code = 06h; SCSI
transparent command set.
• For large USB memory devices, when you are
in the Content Browser, it may take a long
time before you can access your files.
• When using a USB portable harddisk: Due to
the high power consumption of the harddisk,
it is advised to use the external power supply
of the portable harddisk to guarantee proper
working under all conditions.
