Bedienungsanleitung Philips 321E1 (Seite 4 von 39) (Englisch)

686778

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

1. Important

• Looking at something varying

distances after a long period

focusing on the screen.

• Conscious Blinking often while

you work.

• Gently closing and rolling your

eyes to relax.

• Reposition your screen to ap-

propriate height and angle ac-

cording to your height.

• Adjusting the brightness and

contrast to appropriate level.

• Adjusting the environment light-

ing similar to that of your screen

brightness, avoid the uorescent

lighting, and surfaces that don’t

reect too much light.

• Seeing a doctor if your symp-

toms.

Maintenance

• To protect your monitor from pos-

sible damage, do not put excessive

pressure on the LCD panel. When

moving your monitor, grasp the

frame to lift; do not lift the monitor

by placing your hand or ngers on

the LCD panel.

• Unplug the monitor if you are not

going to use it for an extensive pe-

riod of time.

• Unplug the monitor if you need to

clean it with a slightly damp cloth.

The screen may be wiped with a

dry cloth when the power is o.

However, never use organic solvent,

such as, alcohol, or ammonia-based

liquids to clean your monitor.

• To avoid the risk of shock or perma-

nent damage to the set, do not ex-

pose the monitor to dust, rain, water,

or excessive moisture environment.

• If your monitor gets wet, wipe it with

dry cloth as soon as possible.

• If foreign substance or water gets in

your monitor, please turn the power

o immediately and disconnect the

power cord. Then, remove the for-

eign substance or water, and send it

to the maintenance center.

• Do not store or use the monitor in

locations exposed to heat, direct

sunlight or extreme cold.

• In order to maintain the best per-

formance of your monitor and use

it for a longer lifetime, please use

the monitor in a location that falls

within the following temperature

and humidity ranges.

• Temperature: 0-40°C 32-104°F

• Humidity: 20-80% RH

• IMPORTANT: Always activate a mov-

ing screen saver program when you

leave your monitor unattended.

Always activate a periodic screen

refresh application if your monitor

will display unchanging static con-

tent. Uninterrupted display of still

or static images over an extended

period may cause “burn in”, also

known as “after-imaging” or “ghost

imaging”, on your screen.

• "Burn-in", "after-imaging", or "ghost

imaging" is a well-known phenom-

enon in LCD panel technology.

In most cases, the “burned in” or

“after-imaging” or “ghost imag-

ing” will disappear gradually over a

period of time after the power has

been switched o.

Warning

Failure to activate a screen saver, or

a periodic screen refresh application

may result in severe “burn-in” or “after-

image” or “ghost image” symptoms

that will not disappear and cannot be

repaired. The damage mentioned above

is not covered under your warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 321E1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 321E1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info