Bedienungsanleitung Philips 32HFL4007N (Seite 23 von 54) (Englisch)

706193

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

EN 23

English

Lock or unlock channels

1. In the child lock menu, select [Channel

lock].

2. Enter the child lock code with the

Numeric buttons. The [Channel lock] menu

appears.

3. Select channels to lock or unlock.

Parental rating

You can set your TV to display only

programs with age ratings lower than your

child’s age. This restriction only applies to

digital channels from broadcasters that rate

their programs according to age.

1. Press .

2. Select [Setup] > [Channel settings].

3. Select [Child lock] > [Parental rating].

A message prompts you to enter the child

lock code.

4. Enter the child lock code with the

Numeric buttons.

5. Select an age rating, then press OK.

All programs above the selected age rating

are blocked.

For information on child lock codes, see Use

more of your TV > Set locks and timers >

Child lock.

Use EasyLink

What you can do

You can get the most out of your

HDMI-CEC-compliant devices with Philips

EasyLink enhanced control features. Connect

your HDMI-CEC compliant devices through

HDMI to your TV and control them at the

same time with your TV remote control.

Note: Other brands describe HDMI-CEC

functionality differently. Some examples are

Anynet (Samsung), Aquos Link (Sharp) or

BRAVIA Sync (Sony). Not all brands are fully

compatible with Philips EasyLink.

After you switch on Philips EasyLink, the

following features are available:

One-touch play

When you play an HDMI-CEC compliant

device, the TV switches on from standby and

switches to the correct source.

One-touch standby

When you press on the TV remote

control, the TV and all HDMI-CEC

compliant devices switch to standby mode.

EasyLink remote control

You can control multiple HDMI-CEC

compliant devices with your TV remote

control.

System audio control

If you connect an HDMI-CEC compliant

device that includes speakers through the

HDMI ARC connector, you can choose to

hear the TV audio from those speakers

instead of the TV speakers.

Synchronize audio

If you connect your TV to a home theater,

you can synchronize the audio and video to

avoid lag between the picture and sound.

Retain picture quality

If your TV picture quality is affected by the

picture-processing features of other devices,

you can switch on Pixel Plus Link to retain

picture quality.

Maximize display for subtitled video

Some video subtitles can create a separate

subtitle bar under the video, which limits the

video display area. To maximize the video

display area, you can switch on auto subtitle

shift and display the subtitles on top of the

video image.

Hear another device when TV is in standby

You can hear a connected HDMI-CEC

compliant device through the TV speakers,

even when the TV is in standby.

What you need

 Connect at least two HDMI-CEC

compliant devices through HDMI. See

Connect your TV > About cables >

HDMI (Page 35).

 Configure each HDMI-CEC compliant

device properly

 Switch on EasyLink

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32HFL4007N Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32HFL4007N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info