Bedienungsanleitung Philips 32PDL7906K (Seite 57 von 72) (Englisch)

481158

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

EN 57

English

Wireless LAN ready

This section is only for wireless ready TVs.

With the Wireless USB adapter PTA01

accessory (sold separately), you can connect

the TV to your home network wirelessly.

You can enjoy the best of the web from Net

TV services, and sharing of content between

your devices connected to the home

network using Wi-Fi MediaConnect or

DLNA, seamlessly and hassle free.

Note:

 The wireless network operates in the

same 2.4GHz frequency spectrum as

common household devices, such as

Dect phones, microwave ovens or

Bluetooth devices, which can cause Wi-

Fi interferences. Move these devices

away from the TV with the connected

Wireless USB adapter.

 You should turn off any unused

network equipment in the home

network as this increases network

traffic.

 Reception quality is dependent on the

location of the wireless router, as well

as the quality of services provided by

the local Internet Service Provider.

 When playing video over your wireless

home network, we recommend that

you use an IEEE 802.11 N router. The

connection speed may differ according

to the operating environment of your

wireless home network.

Make your TV wireless

1. Switch on your wireless network router.

2. Insert the USB adapter PTA01 into the

USB connection at the side of the TV. The

wireless installation starts automatically.

3. Follow the on screen instructions.

WPS - Wi-Fi Protected Setup

If your router supports WPS (Wi-Fi

Protected Setup), press the WPS button on

the router. Return to the TV in 2 minutes,

select [WPS] and press OK. The TV

connects to your network. This takes about

2 minutes. Complete the installation.

Most new wireless routers have the WPS

system and carry the WPS logo. The WPS

system uses WPA security encryption and

cannot be combined with devices on your

network that use the WEP security

encryption. If you still need this WEP device

in your network, install with [Scan] >

[Custom].

Scan for routers

If you have several routers in your network,

you can select the network you need. To

select a specific network router, press

[Scan]on the first page of the installation.

The routers with WPS and the strongest

signal are shown first in the list on screen.

Select the router you need. If you are

connecting a WPS router, select [WPS] on

the TV.

 If you have set the PIN code in your

router software, select [WPS pincode:]

and enter the code.

 To enter the encryption key manually,

select [Custom] and enter the key.

PIN code

To set the secured connection with a PIN

code, select the PIN code and press OK.

Write down the 8 digit PIN code shown on

the TV and enter it in the router software

on your PC. See the router manual for

where to enter the PIN code.

Custom

To enter the encryption key (the security

key) manually, select [Custom] and press

OK. If you have WPA security on your

router, enter the passphrase with the

remote control.

To access the on-screen keyboard, select the

text entry field and press OK. If you have

WEP security encryption, the TV asks for the

WEP encryption key in hexadecimal

numbers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PDL7906K Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PDL7906K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info