Bedienungsanleitung Philips 32PF4311S (Seite 19 von 21) (Englisch)

52912

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Troubleshooting Tips

Glossary

DVI (Digital Visual Interface) : A digital interface

standard created by the Digital Display Working Group

(DDWG) to convert analog signals into digital signals to

accommodate both analog and digital monitors.

VGA (Video Graphics Array) : a common standard

graphics display system for PCs.

RGB signals : These are the three video signals, Red

Green Blue, which make up the picture. Using these

signals improves picture quality.

S-VHS signals : These are 2 separate Y/C video

signals from the S-VHS and Hi-8 recording standards.

The luminance signals Y (black and white) and

chrominance signals C (colour) are recorded

separately on the tape. This provides better picture

quality than with standard video (VHS and 8 mm)

where the Y/C signals are combined to provide only

one video signal.

NICAM sound : Process by which digital sound can

be transmitted.

16:9 : Refers to the ratio between the length and

height of the screen. Wide screen televisions have

a ratio of 16/9, conventional screen TV sets have a

ratio of 4/3.

HDMI (High-Deﬁnition Multimedia Interface) :

Provides an uncompressed, all digital audio/video

interface between the TV and any HDMI-equipped

audio/video component, such as set-top box, DVD

player and A/V receiver. HDMI supports enhanced or

high-deﬁnition video plus two-channel digital audio.

System : Television pictures are not broadcast in

the same way in all countries. There are different

standards: BG, DK, I, and LL’. The System setting (p. 8)

is used to select these different standards. This is not

to be confused with PAL or SECAM colour coding.

PAL is used in most countries in Europe, SECAM in

France, Russia and most African countries. The United

States and Japan use a different system called NTSC.

HDCP (High-bandwidth Digital-Content Protection):

HDCP encrypts the transmission of digital content

between the video source or transmitter such as a

computer, DVD player or set-top box and the digital

display or receiver such as a monitor, television or

projector.

Symptom Possible Causes What you should do

Cannot access Install

• In AV, EXTERNAL or • Press AV key and select TV mode. You can now

menu HD mode access the Install menu by using the Menu key.

PC modes do not • Wrong connections • Check whether connections are correct. (see

work “Using your TV as PC Monitor” on page 15).

(For more details on connection to the PC

equipment, see “Connection Guide”.

• Wrong source selected. • Check whether the source is correctly selected.

Press button to enter Source list and select

the correct source.

• Wrong display resolution • Check whether you have configured the computer on

a compatible display resolution (see “Using your TV

as PC Monitor” on page 15).

• Wrong setting of PC • Check graphic card setting of PC.

graphic card

S-Video colour • Wrong detection of • Check whether power cord is properly connected

becomes faint signal • Press the P + key on the remote control to do a

channel up and then press the P – key to do a

channel down.

Black bar on top • PC refresh rate too high • Change PC refresh rate to 60 Hz.

and bottom of

screen in PC mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PF4311S Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info