Bedienungsanleitung Philips 32PFL3507H (Seite 29 von 61) (Englisch)

474108

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN 29

English

Test signal strength

If a channel or transponder is skipped during

installation, you can test the signal strength of

a satellite or add a new channel.

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Satellite reception test], then press OK.

3. Select the LNB.

4. If you know the frequency of the

transponder (which can include several

channels), select [Frequency] and enter it.

5. Select [Search], then press OK.

6. If a new frequency is found, press

[Store]to add the new transponder with its

channels.

Update satellite channels

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Update channels].

3. Follow the onscreen instructions to

complete the installation.

4. Once complete, select [Finish], then press

OK.

Add and remove satellites

You can add or remove satellites at any time,

and install channels from new satellites.

Note: Before you add satellites, make sure

that the connection type is correct. See Set

up your TV > Satellite Settings > Install

channels (Page 28).

1. Press > [Setup] > [Search for

satellite], then press OK.

2. Select [Add satellite], then press OK.

The TV searches for a satellite on the first

free LNB. This can take several minutes. If no

satellite is found, check the antenna

connections and the position of the dish

antenna.

3. If no satellite is found, select [Restart].

 If you are satisfied with the added

satellite, install the channels.

4. To install all channels, select [Install]. The

installation can take several minutes.

Remove a satellite

1. Press > [Setup] > [Search for

satellite].

2. Select [Remove satellite], then press OK.

3. Select the satellite you want to remove,

then press OK.

Language settings

Menu language

1. While you watch TV, press .

2. Select [Setup] > [TV settings] >

[Preferences] > [Menu language].

3. Select a menu language from the list, then

press OK.

Audio language

Set default audio language

For digital channels that are broadcast with

multiple audio languages, you can set your

preferred audio languages. The TV

automatically switches to one of these

languages, if they are available.

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings] > [Language].

3. Select [Primary audio language] or

[Secondary audio language] to set the

preferred audio languages, then press OK.

4. Select the language, then press OK.

Select audio language

If the TV channel broadcasts multiple or dual

audio languages, you can select the preferred

audio language.

1. While you watch TV, press OPTIONS.

2. Select [Audio language] for digital

channels or [Dual I-II] for analogue channels,

then press OK.

3. Select from the available languages, then

press OK.

Subtitles on analogue channels

1. While you watch an analogue TV channel,

press TEXT.

2. Enter the three-digit page number of the

subtitles page (usually '888').

If available, subtitles are switched on.

3. Press to exit text.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL3507H Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL3507H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info