Bedienungsanleitung Philips 32PFL4007H (Seite 33 von 70) (Englisch)

477041

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

EN 30

Control devices simultaneously

If you connect multiple HDMI-CEC devices

that support this setting, you can control all

such devices through the TV remote control.

Note: This is an advanced setting. Devices

that do not support this setting will not

respond to the TV remote control.

1. Press .

2. Select [Setup] > [TV settings] >

[EasyLink].

3. Select [EasyLink Remote Control] >

[On] or [Off].

4. Press OK to activate.

Tips:

 To switch back to TV control, press ,

then select [Watch TV].

 To control another device, press ,

then select the device from the Home

menu.

 To exit, press .

EasyLink buttons

You can control HDMI-CEC compliant

devices with the following buttons on the TV

remote control:

 : Switch the TV and the connected

device on or to standby.

 Play buttons: Control video or music

play.

 Numeric buttons: Select a title, chapter

or track.

 OK: Start, pause or resume play on the

connected device, activate a selection,

or access the device menu.

 / : Search backwards and

forwards on the connected device.

 : Display the TV Home menu.

You can also control devices through other

EasyLink buttons that are available through

the On-Screen Remote Control (OSRC).

To access the OSRC

1. While you view content from a connected

device, press OPTIONS.

2. Select [Show device keys], then press

OK.

3. Select an onscreen button, then press OK.

4. Press to exit.

Select speaker output

If a connected device is HDMI CEC

compliant, you can output TV audio through

an HDMI cable. Additional audio cables are

not required. Make sure that you connect

the device to the HDMI connector on the

TV. See Connect your TV > About cables

> HDMI (Page 42).

Configure TV speakers

1. Press .

2. Select [Setup] > [TV settings] >

[EasyLink] > [TV speakers].

3. Select an option, then press OK:

 [Off]: Switch off TV speakers.

 [On]: Switch on TV speakers.

 [EasyLink]: Stream TV audio through

the connected HDMI-CEC device.

Switch the TV audio to the connected

HDMI-CEC audio device through the

Adjust menu.

 [EasyLink autostart]: Turn off TV

speakers automatically and stream TV

audio to the connected HDMI-CEC

audio device.

Select speaker output with the adjust menu

If [EasyLink] or [EasyLink autostart] are

selected, you can access the Adjust menu to

switch the TV audio.

1. While you watch TV, press ADJUST.

2. Select [Speakers], then press OK.

3. Select one of the following, then press

OK:

 [TV]: On by default.

Stream TV audio through TV and the

connected HDMI-CEC audio device

until the connected device switches to

system audio control. TV audio is then

streamed through the connected

device.

 [Amplifier]: Stream audio through the

connected HDMI-CEC device. If system

audio mode is not enabled on the

device, audio continues to stream from

the TV speakers. If [EasyLink autostart]

was selected, the TV prompts the

connected device to switch to system

audio mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL4007H Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL4007H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info