Bedienungsanleitung Philips 32PFL4007H (Seite 40 von 70) (Englisch)

477041

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

EN 37

English

4. Connect the USB storage device.

5. Press .

6. Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] >

[Copy to TV], then press OK.

The channel list is copied to the TV storage

device.

7. Disconnect the USB storage device.

Step 3: If the second TV has no channels

installed

1. Switch on the second TV (on which you

want to copy the channel list).

2. Press .

3. Select [Setup] > [Search for channels] >

[Reinstall channels], then press OK.

The country menu is displayed.

4. Make sure that the country setting is the

same as for the first TV.

5. Press .

6. Press [Cancel] to exit.

7. If the country setting is different, reinstall

the second TV to match the country setting

of the first TV. See Set up your TV >

Restore default settings (Page 41).

8. Connect the USB storage device to the

second TV.

9. Press .

10. Select [Setup] > [TV settings] >

[Preferences] > [Channel list copy] >

[Copy to TV], then press OK.

The channel list is copied to the second TV.

11. Disconnect the USB storage device.

Satellite settings

What you can do

View satellite channels

Note: Available on certain models only.

[Search for satellite] is only available if the

TV supports DVB-S.

To receive satellite channels, connect the

SAT connector on your TV to a satellite dish

antenna.

LNBs

This TV can receive signals from 4 different

low noise block-down converters (LNBs).

An LNB is mounted at the end pole of the

dish antenna and captures signals from a

satellite.

Install satellite channels

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Reinstall channels].

3. Follow the onscreen instructions to

complete the installation.

4. Once complete, select [Finish], then press

OK.

Select connection type

While you install satellite channels, you need

to set the connection type. The connection

type determines the number of LNBs on

your dish antenna and the number of

satellite channels you can install.

1. After you select [Reinstall channels],

select [Settings] and then press OK.

2. Select [Connection type].

3. Select a setting, then press OK.

 [One LNB]: Select if you have only one

LNB.

 [DiSeqC Mini (2 LNBs)]: Select if you

have 2 LNBs.

 [DiSeqC 1.0 (3-4 LNBs)]: Select for 3

or 4 LNBs.

Test signal strength

If a channel or transponder is skipped during

installation, you can test the signal strength of

a satellite or add a new channel.

1. While you watch TV, press .

2. Select [Setup] > [Search for satellite] >

[Manual installation], then press OK.

3. Select the LNB.

4. If you know the frequency of the

transponder (which can include several

channels), select [Frequency] and enter it.

5. Select [Search], then press OK.

6. If a new frequency is found, press

[Store]to add the new transponder with its

channels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL4007H Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL4007H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info