Bedienungsanleitung Philips 32PFL4007H (Seite 56 von 70) (Englisch)

477041

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

EN 53

English

Wired connection

1. Switch on the router and switch on its

DHCP setting.

2. Connect the router with an Ethernet

cable to the TV.

3. Press , then select [Setup].

4. Select [Connect to network], then press

OK.

5. Follow the onscreen instructions to install

the network.

6. Wait for the TV to find the network

connection.

7. If prompted, agree to the End User

Licence Agreement.

Wi-Fi ready

This section is only for Wi-Fi ready TVs.

With the Philips wireless USB adapter

PTA01 (sold separately), you can connect

the TV to your home network wirelessly.

You can enjoy the best of the Internet from

Smart TV services and share content

between your connected devices using

SimplyShare.

Note:

The wireless network operates in the same

2.4GHz frequency spectrum as common

household devices, such as Dect phones,

microwave ovens or Bluetooth devices,

which can cause Wi-Fi interference. Move

these devices away from the TV.

 To reduce network traffic, switch off

unused network equipment in the

home network.

 Reception quality depends on the

location of the wireless router and the

local Internet service provider.

 When playing video over your wireless

home network, we recommend that

you use an IEEE 802.11 N router. The

connection speed may differ according

to the operating environment of your

wireless home network.

Start wireless setup

1. Switch on your wireless network router.

2. Connect the Philips USB adapter PTA01

to a USB connector on the TV.

The wireless installation starts automatically.

3. Follow the onscreen instructions.

Tip: Keep the wireless USB adapter

connected to the TV.

WPS - Wi-Fi Protected Setup

1. If your router supports WPS (WiFi

Protected Setup), press the WPS button on

the router.

2. After 2 minutes, select [WPS] on the TV,

then press OK.

The TV connects to your network. This

takes about 2 minutes.

Most new wireless routers have the WPS

system and carry the WPS logo. The WPS

system uses WPS security encryption and

cannot be combined with devices on your

network that use the WEP (Wired

Equivalent Privacy) security encryption.

If you still need the WEP devices in your

network, install with [Scan] > [Custom].

Scan for routers

If you have several routers in your network,

you can select the network you need.

1. To select a specific network router, press

[Scan] on the first page of the installation.

The routers with WPS and the strongest

signal are shown first in the list on screen.

2. Select the router you need, then press

OK.

 If you are connecting to a WPS router,

select [WPS] on the TV.

 If you want to set the PIN code in your

router software to connect, select

[WPS pin] and note down the code.

 To enter the encryption key manually,

select [Standard] and enter the key

when prompted.

Set secured connection with WPS

encryption

1. To set the secured connection with a PIN

code, select the [WPS pin] and press OK.

2. Write down the 8-digit PIN code shown

on TV and enter it in the router software on

your PC.

See the router manual for where to enter

the PIN code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL4007H Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL4007H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info