Bedienungsanleitung Philips 32PFL6505H (Seite 34 von 65) (Englisch)

450170

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN 34

5. When the correct channel is located,

select [Store], then press OK.

6. Press to exit.

Notes

 If the reception is poor, reposition your

antenna and repeat the procedure.

 If you receive the channel with DVB-C,

the options [Symbol rate mode] and

[Symbol rate] are available.

In [Symbol rate mode], select

[Automatic] unless your cable provider

supplies you with a specific symbol rate

value.

Install satellite channels

(For certain models only)

If your satellite is connected to the SAT

connector, you can receive satellite channels.

Note: If you are prompted to enter a code,

enter '8888'.

1. While watching TV, press .

2. Select [Setup] > [Search for satellite] >

[Reinstall channels].

3. Follow the on-screen instructions to

complete the installation of satellite channels.

4. Once complete, select [Finish], and then

press OK.

Fine tune analog channels

NonPublish

If the reception of an analog TV channel is

poor, try fine tuning the TV channel.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation] > [Analogue: Manual

installation] > [Fine tune], and then press

OK.

3. Press or to fine tune the channel.

4. When the correct channel frequency is

selected, select [Done], and then press OK.

5. Select [Store current channel] to store

the fine tuned channel under the current

channel, or select [Store as new channel] to

store under a new channel number.

Change language settings

Audio, subtitle, teletext languages

NonPublish

Digital TV channels may stream several

audio, subtitle and teletext languages with a

broadcast. Set preferred languages when

multiple languages are available.

1. Press .

2. Select [Setup] > [Channel settings] or

[Satellite settings] > [Language].

3. Select one of the following settings, then

press OK:

 [Primary audio] / [Secondary audio]:

Selects the available audio language for

digital channels.

 [Primary subtitles] / [Secondary

subtitles]: Selects the available subtitle

language for digital channels.

 [Primary Text] / [Secondary Text]:

Selects the available teletext for digital

channels.

 [Hearing impaired]: Enables or disables

hearing impaired subtitles.

 [Visually impaired] (UK only): Selects

the device for audio output.

 [Volume - Visually impaired] (UK only):

Adjusts the volume of the visually

impaired audio.

 [Preferred audio format]: Select

[Standard] to receive standard audio

format (MPEG). Select [Advanced] to

receive advanced audio formats (AAC,

EAC-3 or AC-3 if available).

 [Mono/Stereo]: Select [Mono] or

[Stereo] if stereo broadcasting is

available.

4. Press to exit.

Tip: Set a secondary language in the same

menu. You receive this language if the

primary language is unavailable.

Menu language

NonPublish

1. While watching TV, press .

2. Select [Setup] > [TV settings] >

[Preferences] > [Menu language].

3. Select a menu language from the list, then

press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL6505H Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL6505H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info