Bedienungsanleitung Philips 32PFL6605H (Seite 28 von 65) (Englisch)

450168

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN 28

Use Scenea

Activate Scenea

NonPublish

You can use Scenea to display a picture as

wallpaper on your TV. Make sure that the

location of your TV is set to [Home] mode.

1. Press .

2. Select [Scenea] , then press OK.

The default or pre-loaded picture is

displayed.

Note: If the sleeptimer is off, the wallpaper is

displayed for 240 minutes. Otherwise, it is

displayed for the duration of the sleeptimer.

For more information on the sleeptimer, see

Use more of your TV > Use timers and

locks > Sleeptimer (Page 25).

Set a picture as Scenea

NonPublish

Note: The file size of the picture must not

be more than 1MB.

1. Connect the USB storage device to the

TV.

2. Press .

3. Select [Browse USB], then press OK.

4. Select a picture, then press .

5. Select [Set as Scenea], then press OK.

6. Select [Yes], then press OK.

7. Press any key to exit Scenea.

Universal access

Enable universal access

NonPublish

Where supported by your digital TV

broadcaster, this TV allows special audio and

subtitles for the hearing impaired, as well as

special audio for the visually impaired.

To enable these features, you must turn on

universal access in the [Preferences] menu.

1. Press .

2. Select [Setup] > [TV settings] >

[Preferences] > [Universal access] > [On],

then press OK.

Hearing impaired

NonPublish

Some digital TV channels broadcast special

audio and subtitles adapted for people who

are hearing impaired.

To switch on hearing impaired audio and

subtitles (if available)

1. While watching TV, press .

2. Press the red button to select [Hearing

impaired].

3. Press the green button to switch on

hearing impaired audio and subtitles, press

the red button to switch it off.

4. Press to exit.

Tip: To verify whether a hearing impaired

audio language is available, press and

select [Audio language]. Languages with an

ear icon indicate hearing impaired support.

Visually impaired

NonPublish

Some digital TV channels broadcast special

audio adapted for people who are visually

impaired. The normal audio is mixed with

extra commentary.

To switch on visually impaired audio (if

available)

1. While watching TV, press .

2. Press the green button to select [Visually

impaired].

3. Use the following buttons to select:

 Red - [Off]: Turn off visually impaired

audio.

 Yellow - [Headphones]: Hear visually

impaired audio from headphones only.

 Green - [Speakers]: Hear visually

impaired audio from speakers only.

 Blue - [Speakers + headphones]: Hear

visually impaired audio from speakers

and headphones only.

4. Press to exit.

Note: The green and yellow buttons are not

applicable if EasyLink Remote Control is

enabled. For more information, see Connect

the TV > Use Philips EasyLink > EasyLink

features (Page 51).

Tip: To verify whether visually impaired

audio is available, press and select [Audio

language]. Languages with an eye icon

indicate visually impaired support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL6605H Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL6605H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info