Bedienungsanleitung Philips 32PFL6605H (Seite 33 von 65) (Englisch)

450168

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

EN 33

English

Note:

If you are prompted to enter a code, enter

'8888'.

[Search for satellite] is only available if the

TV supports DVB-S.

1. Press .

2. Select [Setup] > [Search for channels] or

[Search for satellite], then press OK.

3. Follow the on-screen instructions to

complete the channel installation.

4. Once complete, select [Finish], then press

OK.

Tip: Press to see the channel list.

Notes

 During installation, leave [Settings]

unchanged unless your digital provider

provides you with the specific values to

enter.

 When digital TV channels are found,

the list of installed channels may display

empty channel numbers. You can

rename, reorder or uninstall these

channels.

Access DVB-C or DVB-T channels

If you have installed both DVB-C and DVB-T

channels, you have to switch to the

respective network to watch channels on

that network.

1. While watching TV, press .

2. Select [Setup] > [Channel settings].

3. Select [Channel installation] > [Antenna

or Cable DVB].

4. Select one of the following settings:

 [Antenna (DVB-T)]: Access free-to-air

antenna or digital DVB-T channels

 [Cable]: Access cable or digital DVB-C

channels.

3. Press OK to confirm your choice.

4. Press to exit.

The TV switches to the selected channel list.

Access DVB-S channels (for certain models

only)

If your satellite is connected to the SAT

connector, you can receive satellite channels.

Press > [Watch satellite] to watch

satellite channels.

Install analog channels

NonPublish

This section describes how to search and

store analog TV channels manually.

Step 1: Select your system

Note: Skip this step if your system settings

are correct.

If you are prompted to enter a code, enter

'8888'.

1. While watching TV, press .

2. Select [Setup] > [Channel settings] >

[Channel installation] > [Analogue: Manual

installation] > [System], then press OK.

3. Select the system for your country or

region, then press OK.

Step 2: Search and store new TV channels

1. In the [Analogue: Manual installation]

menu, select [Find channel], then press OK.

2. Press:

 The Navigation buttons or Numeric

buttons to manually enter the channel

frequency.

 The Navigation buttons to select

[Search]. Press OK to automatically

search for the next channel.

3. When the correct channel frequency is

entered, select [Done], then press OK.

4. Select [Store current channel] to store

the fine tuned channel as the current channel

number, or select [Store as new channel]

to store it as a new channel number.

Install digital channels

NonPublish

You can reposition your antenna to improve

the reception. You need to know the

correct frequency to tune. For best results,

contact the service provider or get a

professional installer.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation] > [Digital: Reception

test] > [Search], then press OK.

3. Press the Numeric buttons to enter the

channel frequency.

4. Select [Search], then press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL6605H Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL6605H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info